Reviews
Enough for chain cleaning/adjustment and rear wheel washing.
This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.
View detail
Easier to use than I thought.
I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.
View detail
It takes more strength than you think to turn it.
I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.
View detail
I want to make chain refueling easier since there is no main stand.
I'm not sure if it's because I'm not used to it or because it's too heavy to turn the tire. View detail
Not suitable for heavy vehicles and vehicles with large tire contact area.
* The video is a recent driving scene with my car FZr1000 3GM5.
[How is it used?
Cleaning and maintenance of wheel.
Was the one you received as per Image?
It was as per Image.
How was your experience with it?
As shown in the title, it is not suitable for heavy vehicles and vehicles with large ground contact area of tire.
[Points to note]
Even if you use it, I think it is up to 250cc class weight car body.
How did it compare to other products?
Chain lubrication, etc., is not necessary for a heavy body. Swingarm Lift Stand is better to use.
It can only be used for cleaning the wheel.
Other items that would be helpful
Installation Point or hang/It is better to lay a square of about 3 cm in STAND.
Items to buy together/Square timber.
Opinions and requests to Manufacturer/It should be indicated that it is difficult to use for chain lubrication of the rear wheel.
View detail
The slide is useless.
The non-slip surface on the back of the body comes off immediately. is coming off immediately.
Since it supports a heavy object, please make it more solid.
If the body is dislodged when it is placed on the Roller, the RollerBody will not remain stationary and the
If there is no non-slip surface, the genus Gold part rubs against the ground and scratches it.
I'm just going to do some Chain cleaning.
Would a Type that lifts the car body be better to work with?
I feel like I can work better when the wheels are turning.
This one is more stable, though.
View detail
MaintenanceRoller
I was looking for a rear stand.
It's been working great for me.
View detail
Non-slip bottom Gap.
I bought it to take care of the Chain and front and rear wheels.
Until now, I had to jack-up the car with the Side Stand up to maintain it, but with this, it is very easy to just put either Tire on the car.
But when you don't do it with both hands to turn the Tire, it's heavy and as other people's imprints, the Tire that you turn will Gap to the other side of the Side Stand. I think it is Large sturdy as long as the ground is not too slippery because there was not.
View detail
For the price, that's about as good as it gets.
The Roller is not well made and the rotation becomes wavy and difficult to turn the Tire.
It requires a lot of force, and it is hard to work smoothly with crunchy movements.
The Shaft is bent, or maybe it doesn't have Bearing in it.
View detail
It was good
I bought it for front wheel maintenance as it comes with a Center Stand. 。
I didn't expect much, but it went around the front wheel more than I expected.
I am happy with the price.
View detail
Very easy to use
Purchased for ChainMaintenance and cleaning around the wheels Chain cleaning and lubrication, which used to be done while pushing and pulling the motorcycle, is now much easier Tire rotation needs a little bit of power, but it's lighter than I expected, so it's not too much of a problem There is no problem as a practical use However, because of the horizontal gapping as it rotates, you can turn the Tire in the direction of rotation Quantity:Pair (for Left and Right) It's better to ride on either side of it, and the Body texture is very good It's not hard to find a place to put it like the MotorcycleLift, so it's only a simple task Then I think this is good enough for you View detail
Easy to use
I used it on my Kawasaki 750
I used it to clean the Wheel after Touring, but I didn't have to lift up the body of the car
It's easy to put on the Roller and rotate the Wheel
I wish I had bought it sooner
View detail
The quality is good and it's a good value for money
I purchased this for rear tire maintenance At first I was considering using a STAND type, but I felt it was a little inconvenient to use it in my parking lot I was looking for something a little more compact and found this product
I checked the actual product when it arrived, but there was no rattling, no unevenness in color, and the rotation of the Roller was also It was Smooth And I used it for maintenance Because of the slope, it needs a little momentum Moreover, because the tire is grounded to the Roller, it needs a little force only at the beginning of the turn of the tire But once it started working, I was able to turn it with more ease than I expected I think this is a good enough price for maintenance work for beginners
View detail
For Maintenance
Looking for a STAND for wheel and chain maintenance on a motorcycle I bought this one because I wanted to be able to rotate the Tire easily It's not too heavy, so it's easy to carry and there are several non-slip edges on the bottom I've got a Tire on it
As for the rollers, it's easy to get around the Tire, you can use the floating type It's not like the Maintenance Stand
Considering that I was doing it while moving the Motorcycle back and forth
I wish I had bought it sooner, because I can work much easier It would be even easier to turn it around if you put something under the Side Stand to adjust it
Maintenance is also a good product costumer, so even as a beginner in maintenance Thank you
View detail
A simple maintenance is OK
Purchased for front and rear wheel cleaning and ChainMaintenance
I thought about Maintenance Stand, but I had a CostValue for my usage There is none, so it is rejected
To use it, just put it on the Roller (Minus the non-slip part below)
Put GEAR in the front wheels and install FrontBrake stopper separately for the rear wheels Use
Both can be turned by putting a little pressure with both hands Be sure to check the movement of the vehicle
It is used in NINJA1000 (236?) People may be a bit Large strange to let one person ride the Roller alone
It's cheap for me and I'm happy enough with it because it's small and doesn't take up much space
View detail
That would be handy
I bought it for Front because I am making the most of the Center Stand
If you lubricate the Roller, you can turn it very lightly
Quantity:It is good that the front tire area is easy to clean once it is set, but the Center Even in the upright position with Stand, if the rudder angle is on, the ship will run away You need to straighten it up and turn it, as long as the rollers section is spooled up Maybe
View detail