Reviews
Why is the same number of Ding as OEMs so expensive….
What made you decide to buy?
I have been working on the ZX-6R for 3 years now, and the mileage is about 10,000 km. I thought it was too early to replace them, but since all the parts were available during the spring sale, I decided to replace them.
[How was the installation?
I found information that the Torque of the Engine Sprocket nut fixing the front sprocket was halfway tight, so I loosened the Engine Sprocket nut using an electric Impact wrench from Tirefor Replacement. After that, I tightened the rear brake with the torque wrench at the specified torque of 147Nm, and finally, I bent the washer over the nut using the water pump pliers to prevent it from loosening.
*We are planning to describe this replacement work in our maintenance diary. Please take a look if you like.
How was your experience with it?
At first I was not sure whether to go with 16T or not, but I liked the ride quality of the OEM, so I decided to go with 15T, the same as the OEM. So there was no change between before and after the replacement. The normal specifications list on the product page says 16T, but the 21-year ZX-6R has 15T Front, 43 Rear, 2.866 reduction ratio, and 112 Chain links.
View detail
Just the right Size for Motorcycle
Similar products were not purchased because they were too large for motorcycle use (10L, etc.) or too tall to fit underneath.
The 4L capacity is sufficient for Motorcycle and may be used for light cars.
The photo is of a Z900RS, but it is lower in height and easier to install than a littering pack or something like that.
In similar products from other companies, the cap is often damaged by oil and cracks, but this one seems to be large and sturdy because it contains packing.
Since there was no Net at the receiving end and Bolt was in danger of falling in, a suitable net was installed with glue.
The receptacle is shallow, and if the ejection is too vigorous, it may fly out.
View detail
Fits: SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy
meticulous manufacturing
It was good up to the point of installing the Coupler on the body side of the NORMALIndicator with the Coupler, but the remaining Black color code was installed with Tap for Connection and the Instruction Manual's Sky blue code. The sky-blue code is used to connect to the Quantity:There are 2 pcs and the first connection failed, but I opened the Tap and connected it to the dark sky blue cord and it lit up fine. View detail
I recommend it!
Installed on CROSS CUBJA10
on purpose of installation
As the instruction manual says.
Some vehicles have to be shaved Crankcase
Quantity on the mating face of the Case:Pair (for Left and Right) Vehicles with upper and lower gaps in the
The hole where the Cylinder enters needs to be cut into a circle.
When assembled with the gapped cylinder, when the engine is applied and the cylinder expands thermally, it will cause the gapped cylinder to expand and the engine will not be able to operate.
It will not spread and will result in biting a new Piston!
The Gap of the Case cannot be checked unless the Normal cylinder is removed.
Then there is the work of processing the Case, so
It is safer to ask a motorcycle shop to assemble it.
I worked on two vehicles, mine and a friend's.
Both units had a top and bottom Gap in the Case mating area.
After cutting to a circle with Air Leutor, it was installed.
It is only 15cc bore up.
The effect is extremely Large, making Torque thicker and easier to use on a daily basis.
It is now easier to go uphill.
The parts we use also have HONDAMark on them.
Is it made in ThailandHONDA? I think it is reliable.
Regular Specification, and I think the difference is Recommendation
View detail
Niche tool but Large active!
True to its name, the Brake Pads Opener is a great tool for widening the gap between Brake Pads.
In our house, this one has been used from One Side 1 pot of Hara 2Scooter to 6 pots of Large type On road facing each other.
How often do you use it that often? You might think,
It is used unexpectedly frequently for assembly after cleaning the brake caliper or reinstallation of the wheel after removing it for tire replacement, etc.
In my case, I also have an off-road motorcycle, which I use for both touring and racing, and I prepare separate wheels for touring and for racing and set up tires on each wheel, and then change each wheel depending on the application.
I change the wheels for RaceWheel about 3 times a year and change them for TouringWheel when the race is over. Therefore, the Opener is a big help to me.
It's not bulky, and it's a really useful tool to have, so it's a recommendation!
View detail
Swing Arm scale is for reference only
As the title says, the scale on the Swing Arm is for reference only.
I was looking at Motorcycle from behind and noticed that the teeth of Sprocket were somehow closer to the body side of Chain.
Quantity in the Swing Arm scale:Pair (for Left and Right) The position of Chain and Sprocket is not good, even though they are in the same position.
The Chain Alignment Tool was used to straighten the Chain, and the alignment between the Chain and the Sprocket was perfectly aligned, and as a byproduct, the Swing Arm scale was set to "Quantity:Pair (for Left and Right) We found that there was a Gap of about 2-3mm in the
If the alignment of the Chain is not correct, it can cause uneven wear of the Tire and damage to the Sprocket and Chain.
This is a Tool of Recommendation for those who are interested in getting ChainAlignment right!
View detail
Changing from iridium to iridium
It was time to replace the Plug.
I've been using Iridium Plug.
I decided to give it a try since it's a new release.
I can't tell the difference between the iridium plug and the iridium plug by feel when I see it installed...
The iridium has a life of 5,000 km, but it was replaced after 10,000 miles.
After 5,000, they were losing fire and fuel efficiency.
The life span of motoDX is said to be twice as long as that of motoDX.
As of now, we have over 6,000 on the road and have not experienced any misfires or fuel consumption deterioration.
If there is no change in performance compared to iridium but a longer service life.
I think it's worth replacing.
I think it's a good thing in general.
I give it a 5 star rating with high expectations.
View detail
Tightens up the look.
Was the one you received as per Image?
It was something I saw often, so it's on Image.
Was the installation difficult?
I used a hand guard from the same Manufacturer, so no problem at all!
How was your experience with it?
I don't know if it is useful yet because I haven't driven it in a place where it would be useful, but it looks very atmospheric and satisfies my sense of ownership.
[Included Parts:were they on?
Installation Bolt
[Was there anything that disappointed you?
None
Other items that would be helpful
Of course, the same Manufacturer's hand guard is only a few minutes' work!
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA650R, KAWASAKI VERSYS 650
For NINJA400R
Installed on NINJA400R.
Since it is an important safety part, we asked Motorcycle shop to install it.
The feel of operation, texture, etc. was perfect without any complaints.
If you are not confident about installing it yourself, ask a professional contractor to do so.
View detail
For NINJA400R
Installed on NINJA400R.
I was able to do it without removing the cowl, but I had a little trouble tightening the bolt because it was too small.
If the installation had been a little easier, I would have given it a perfect score without any complaints.
View detail
I'm glad I bought it!
I wasn't sure whether to buy it, but, I'm glad I did! ♪ (??????) ♪ View detail
SM LINEFender MD44 installed
As per the impressions of our predecessors, the MD38/44 can be installed without any body modification.
Reasonable price and VisualUp, no complaints!
However, in my case, I have prepared the following additional components
Spacer:6.2mm ID x 15mm OD x 6mm L (qty:4)
Bolt:M6 x 30 (qty:2)
Flat Washer:M6 x 22 (qty:4)
When MD38/44 is installed, the spacer thickness should be at least 6mm to avoid interference with the car body. The outer shape may be a little larger than 15mm.
It is fastened with 4 OEMBolt, but for some reason, Quantity:I also bought Bolt because each 2pc is a different length (my used one) and when I put Space on, the shorter one doesn't reach.
When tightening from the tire side, the bolt groove on the FenderBody is large, so the washer is also large. 22mm larger than the bolt groove will cause the washer to ride up.
For your information.
View detail
Tools used only occasionally are SK11
I use basic KTC and Tone for tools.
I use SK11 for tools that are used only occasionally.
Insert angle of this Deep socket:6.35mm (1/4Inch) Purchase
Sprocket Coveretc.It is necessary to remove the bolt that is deep in the bolt, and it is necessary to remove the bolt that is deep in the bolt.
Frequently used insertion angle:9.5mm (3/8Inch) Deep socket in the
If you try to use the 8mm, the Ratchet Pouch opening will be
It's thicker, so it hits the Cover.
So, insertion angle:6.35mm (1/4Inch) will be needed
But I don't use KTCetc. so I don't want to buy KTCetc. for my Wallet...
Thank goodness for SK11's Socket
Reliable quality at a reasonable price
I use KTC and Tone where I hang Large Torque.
The parts of SmallTorque that are not used much are supplemented with SK11.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled)
Maniacal Parts
I've been wondering about buying it for a long time … it's just a stick.
However, I think you can experience it.
For example, if you intentionally put a load on the Front and drive into the Corner, the Wheel turns smoothly, and the suspension moves well and feels light!
I just wondered if it is a Maniacal Parts, like … only for those who understand.
View detail
Great grip comfort
The OEM Lever for the SV650 is a good or bad bike Level, but this Lever not only looks cool, but I was surprised at the high quality when I held it for the first time after installation!
Installation is easy and takes less than 30 minutes if you have experience with grease up and lubrication of Lever!
View detail
These are the ideal Gloves!
The design and comfort of the Gloves are just like the Image! 。 Leather is soft and fits my hand very well. 。 We have a solid Protector in place where needed. 。 This is the second one I have purchased from you, but I am glad I took the plunge. 。 The other one is used by a friend of mine and is well received. 。 The result is Large satisfactory product. View detail
trial and error
Only Bracket is purchased to install Separator.
Since it cannot be installed as it is, it was processed secondarily. The Stem Steel Emblem is not installed.
Please note that this is not normal usage.
View detail
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
Might be useful to have.
I think it depends on the way you fall, but in my case, when I fell standing up on a forest road, this helped me to minimize the Damage. View detail
Commendation for the first Leather Boots
As for the size, the instep area seems to be made for a large size, so it is better to adjust the inner sole or the thickness of the socks.
Purchase Size:26.5cm
Size of my normal shoes
・RedWing US9
・NIKE 29cm
・VANS 27.5cm
・VANSSlip-on Silencer US10
Leather is soft and (DoctorMartin rank) I think that even people who have only ever worn Sneakers will be able to wear them without difficulty.
The softness of the leather also makes it easy to operate the Shift Pedal and walk on foot while touring.
On the other hand, the softness of the leather should not be expected to immobilize or protect the ankle in the event of an accident.
The side fastener is very convenient for Large and I can no longer wear Engineer boots without the side fastener!
The sales person at the manufacturer said that the magic tape that guards the fastener is not strong, and if you are careful when storing it, for example, by stopping the magic tape, it should last for a year and a half. Also, the manufacturer can repair it.
Since there is not much information available after the aging process, we have decided to post an Impression.
Overall, get used to it as your first genuine leather Boots, get used to doing Maintenance. (Brush to remove dirt, apply Cream, blow up, WaterproofSpray) It would be good for
The sales person at Manufacturer told me that Cream is better as a basic oil, because if I put only Mink oil on it, it becomes too soft.
View detail