Reviews
Used for Meter replacement
Because the OEM meter was cracked, it was used to replace it with an external meter
Thanks to this, the Meter can now be replaced without damaging the Harness of the vehicle body
110Plain Type Terminal is also a quantity:Since it is a set, there is no need to purchase additional items
View detail
good
I buy it for connecting the left right light since I need to replace the light with other type but the original connector is different, So i buy this to replace it. I think this one is suitable and the condition is good. View detail
It was perfect as it is for a car model.
In the lack of strength of the crimping part fixing Harness?
When crimping Harness, Po Kit broke.
I think that I was not putting much effort,
View detail
It is a common Coupler
I used it to take electricity of Grip heater.
It is 110 type Coupler which is everywhere.
If you go to the Home center you can get more cheaply with bulk buying, but I bought it because I was OK with only one.
Because it is only one, it is a little expensive.
View detail
ETC power connector is perfect.
Because JRC's ETC power supply ConnectorMale side was damaged, I was looking for a conforming MT 090 Connector, but I found this product and purchased it. Eiring Works Pliers is necessary for Wiring, but it was easy to do without making a big difference between machining of a normal flat terminal. I tried into ETC on the male side Connector of Power Cord, but it is perfect. Waterproof, so do not worry about using it in rainy weather, as with OEM Product etc. It became possible to use.
When inserting the terminal into the Connector, it is easy to insert it by mistake in the top and bottom, so it is necessary to be careful, but if you make a mistake it is easy to fix so it is easy to fix.
There is not much treatment in other NetShop and it is saved because we handled it with Webike.
View detail
With High Solo exchange!
I bought ActiveUniversalThrottle kit to install it on Grom. When diverting the Magma 50 Switch Box of Honda OEM Product from Grom OE MSwitch box, it is necessary to convert it to Connector on Grom side. Switch boxWiring diagram will hit by Net search. There is a User who is explained in a very easy-to-understand manner, so it was helpful for Wiring work. Along with the High Soloization of Grom, OEM's Switch box to Other Company View detail
OEMConnectorSpec.
Fender Eliminator (Magical) I bought it for Wiring of License Plate Light. In the past I connected to the same model with the Bullet Terminal terminal, but this time I made it possible to plug into the OEM Coupler. The difficulty was that Coupler's terminal jacks were Small, so even if we used thin wires, it was hard to get into the specified depth and I was in trouble..
In my case I pushed it with a Small Slotted screwdriver, I feel relieved when I get in to Pushingon.
View detail
KITACOConveniencePartsK-CON Connector set
I purchased this KITACOConveniencePartsK-CON Connector set so that you can easily attach and detach Wiring's connection using Connector.
This KITACOConveniencePartsK - CON Connector set is a 3 - wire Connector so you can connect securely with One - touch so as not to mistake ++ -.
In order to connect 3 wires, I attach 6 Gold gold wires crimped to Wiring, but I solder the Gold gold terminal and Wiring crimped in order to further securely connect firmly came.
This KITACOConveniencePartsK - CON Connector set can connect Wiring easily and reliably conveniently, but Material : Plastic's Connector itself is a little bulky so choose the place to hide.
I attached a Tale lamp to the removable Rear Carrier separately from the Motorcycle Body, so I used this KITACOConveniencePartsK - CON Connector set to do its Wiring.
Tale lamp (+) And Stop lamp (+) And Minus (-) This KITACOConveniencePartsK - CON Connector set is a perfect item to connect and disconnect three wires of the Connector itself, but as mentioned above, the Large rating of the Connector itself becomes a little obstructive.
When wiring to Tale lamp with Rear Carrier, this connector is pulled to Carrier in Hemp palmk band, so it's nice to have it fit, but it is on Motorcycle side when Rear Carrier is removed When hiding half of Wiring's Connector under Seat, I had a little hard time to hide the Connector without filling in the gap.
Actually, since it is not Seat's gap but Seat is completely removed and this connector is pushed into the space below, it is not problematic for practical use.
Until then, we had connected color-coded Wiring one by one at the Bullet Terminal terminal.
Since each Bullet Terminal terminal was Small, it could be pushed into a narrow gap, but it was a troublesome task because it was impossible to connect with one-touch at the time of connection.
Although it was not bad even with the convenient Bullet Terminal terminal, after switching to this KITACOConvenience Parts K-CON Connector set, the connection became quite convenient.
Material : Although there is anxiety about the durability from ultraviolet rays of the PlasticConnector part and direct sunlight, it is very easy to use Items.
.
View detail
Make peace of mind whenever you use it
I always use it is easy to use without problems
Although it may not have an impression, it is easier to use than a car because I used it up to now
Try using one after another
View detail
My original MotoEasy parts
In order to produce my own MotoEasy, I purchased it because it was easy to find if I was looking for Headlight's H4 Coupler.
I installed it but I was able to attach to Smooth without any problems.
View detail
KITACOConveniencePartsK-CON Connector set
【What made you decide the purchase?】
I wanted to install and detach easily so as not to mistake the 3 wires of Wiring, so I purchased this KITACOK-CONCONnector set and tried using it.
【How was it actually used?】
When extending Rear Carrier, OEM's Tail lamp became hard to see from behind, so I installed an auxiliary light on the expanded Rear Carrier, but since Carrier is frequently installed and removed frequently, I used it until then We exchanged this KITACOK - CONConnector set from the Bossi terminal of the Wiring connection.
Thanks to the usability related to installation and removal, it got better enough to make a mistake.
【Mounting was difficult?】
When inserting this KITACOK - CONCONnector 's terminal into the Coupler, you must install it while confirming that the direction of the terminal is not wrong.
It is not difficult, but attention is necessary.
【Please tell me the installation point and hang】
I crimped Wiring to each terminal before inserting the terminal into this KITACOK - CONCONnector 's Coupler, and I attached it to the Coupler so as not to make a mistake after soldering.
[Is there anything I was disappointed about?]
It was Compact because Wiring was connected with 3 line segments Bullet Terminal jacks, but Large is bulky instead of this KITACOConnector.
Although it became convenient after wearing it, this KITACOConnector became in a state of disturbance more than I expected.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I'm very happy to have a Waterproof ability a little more, but I think this price is a sufficient product at this price.
【Have you compared items?】
Bullet Terminal terminal connection changed from this KITACOK-CONCONnector set connection.
Normally, without making a mistake it is possible to easily disconnect and disconnect Wiring in a short time, but this KITACOK-CONConnector set is inferior to Bullet Terminal terminal in Waterproof ability, and the Large size becomes an obstacle.
[Others]
Since this KITACOConnector sounds with Engine vibration, it fixed in the in Hemp palmk band.
Also, since this KITACOConnector has no Waterproof ability, Waterproof measures were applied to the root of six places of each Wiring at the base of Connector with Waterproof Coking agent.
.
View detail
Purchase Female for KLX 125 Rear blinker
Last time in acquaintance's KLX 125 Rear blinker exchange
Cutting the Wiring of the Unbreakable lens and directly attaching the Connector, this time I created the Extension Cord properly in the Connector.
Machine side, Green and White is PlusWiring.
I think that it is better than direct because Wiring can also afford it with this.
View detail
When I only want Connector's One Side
I bought it when I exchange OEMBlinker for DRC LED Blinker. The other Manufacturer is TAB, receptacleSet, but this is very saved because it is sold only with Female. View detail
There is no bad thing
Speaking of
I hope if there are other colors.
I do not need the Male part
Female only Quantity : 2pc. It was purchase of Set.
KLX125
In for Rear
Purchased with Unbreakable lens.
Blinker
Fender Eliminator's Tail fixed Bolt
Fixed to Plate
View detail
this is a suzuki factory connector for the headlight I have a gz250 2000 w/90,4ook miles on her 15 years ols mint new condition
this is a suzuki factory connector for the headlight I have a gz250 2000 w/90,4ook miles on her 15 years ols mint new condition View detail
Easy to create and easy to use
I bought it because it was necessary for me to make a separate Connector for my own work.
Male1pc. , FemaleQuantity : 2pc. It will be purchase of Set.
(GSX is Dual light)
KITACO products that can be bought at Rose are saved this time.
It is expensive if it is a set item, and a little waste if left over.
Also immediate delivery of Webike's inventory is saved.
This Female has 0. 75 core wire is Crimp.
Using DAYTONA's OEM Color Harness.
As I thought, this OEM Color Harness was just started recently since I bought it with Webike a few years ago ...
Making is trivial, but it makes sense of security.
If you make it carefully with a solid tool, everyone will be able to create Harness without fail.
Also, although it is a plain talk, Memory is engraved securely with this operation manual.
The point where the hand reaches such an itchy place is not unique to Manufacturer specialty.
View detail
Thanks for being easy and easy ...
I bought it because it was necessary for me to make a separate Connector for my own work.
With this combination, FemaleX Quantity : Because 2 pc was required for Male 1 pc, if it was from other company's TAB, receptacleSet it always ended up and it was unwilling to choose here.
However, because it is such a thing, if you think that you want to buy it easily at a local shop, most of KITACO products are not put on it.
The nice thing about KITACO is where TAB, receptacle can be bought at Rose.
After all it was immediate payment with Webike who is always indebted to us, we purchased it together with other products.
(I am saving shipping cost ... I'm sorry)
Parts Each quality is perfect.
There is also a solid gold fixture.
So here we are talking about Title ... Actually I can not crimp the core wire better with a hand-held tool ... (sweat
Yes, because it is a so-called Crimped Pliers, because it is attached to every one, choosing Crimp of just the right size will bit the tip of the L-shaped gold tool ... That was a blind spot for a moment.
Since it can not be helped, I devised with his hands, but some Connector had no choke but to bit me.
This is just a problem with the tools on hand, so it is perfect as a product.
Although, although it is said that it is a waste to put up earlier, if it is as easy as this is, it may be good to have a spare.
View detail
Wiring connection
I used it for Wiring connection with LED Tail Lamp installation. Usage is very easy, the wire is stripped, it sticks into the electrode, and only the copper wire part and the leather part are thrust into the connector in two places Crimp. Electric Works Pliers think that it would be more convenient. Even if you use Nipper's cutting edge well, there is nothing you can not do.
View detail
When exchanging the Front blinker of '07 XR250MOTARD for an external article, he wanted to use with a pure Coupler and it was used.Since it is not a TAB, receptacle Set like the product of other company and a terminal remains, it does not become preco
When exchanging the Front blinker of '07 XR250MOTARD for an external article, he wanted to use with a pure Coupler and it was used.Since it is not a TAB, receptacle Set like the product of
other company and a terminal remains, it does not become precocious.Although the color of the terminal differed from orange and a light blue by
right and left, I thought that it was close to a pure color.
View detail
When exchanging the Front blinker of '07 XR250MOTARD for an external article, he wanted to use with a pure Coupler and it was used.Not the plug terminal that tends to be external Blinker but pure wiring, and a terminal could be used, and it was settle
When exchanging the Front blinker of '07 XR250MOTARD for an external article, he wanted to use with a pure Coupler and it was used.Not the plug terminal that tends to be
external Blinker but pure wiring, and a terminal could be used, and it was settled shapely.Since it is not a TAB, receptacle Set like the product of
other company, a terminal does not remain but I think that it is good.
View detail