Check my coupons
Product Detail
Specification:
[seat height] fava bean high:820mm (stock seat.)800mm)
[nameplate size]
Vertical:13mmX width :50mm(Black/Red,Black/Black,White,White/Red)
Vertical:20mmX width :70mm(Brass,Copper)
[nameplate size]
Vertical:13mmX width :50mm(Black/Red,Black/Black,White,White/Red)
Vertical:20mmX width :70mm(Brass,Copper)
[Description]
The seat surface is 20mm higher than the stock seat, but by shaping the part of the seat that touches the inner thighs when lowering the legs, we have achieved almost the same footing as the stock seat.
Because the seating position is higher, the knees bend more gently, and it is closer to a standing posture, which makes it easier to operate the vehicle with a step load.
The step load is increased, and the load on the buttocks (seat) is relatively decreased, and the burden is reduced.
The unique shape of the front part that touches the inner thigh makes it possible to hold the vehicle body as if you were wearing a knee grip.
It makes it easier to stabilize the vehicle when loading cargo or wobbling at very low speeds.
This seat is recommended for long distance touring because the sponge is thicker and more comfortable.
[Features]
The seat base is specially designed by K&H.
It can be used by replacing the stock seat.
The seat can be installed with the same key as the stock seat, and no modification to the vehicle body is required.
Plain black leather throughout, stitched seams all round the centre of the seat.
Thick stitching threads are carefully sewn in, so it looks as if the vehicle has been upgraded with just one seat replacement.
It is made of injection sponge, which is fired in the mold, so it has good cushioning and does not change with age, so you can use it for a long time.
The sponge and the base of the seat are not glued together afterwards, but molded in one piece in the mold, so there is no seam when the leather is applied.
[finish stitching line]
The stitching lines are usually finished with black stitching, but it is also possible to finish with piping, in which the leather is wrapped around an octopus thread.
[Sponge hardness adjustment]
・Standard
If you weigh 60-80kg, this setting is for you.
・Hard sponge
Recommended for people weighing over 80kg.
・Sponge soft
Recommended for people weighing less than 60kg.
Because the seating position is higher, the knees bend more gently, and it is closer to a standing posture, which makes it easier to operate the vehicle with a step load.
The step load is increased, and the load on the buttocks (seat) is relatively decreased, and the burden is reduced.
The unique shape of the front part that touches the inner thigh makes it possible to hold the vehicle body as if you were wearing a knee grip.
It makes it easier to stabilize the vehicle when loading cargo or wobbling at very low speeds.
This seat is recommended for long distance touring because the sponge is thicker and more comfortable.
[Features]
The seat base is specially designed by K&H.
It can be used by replacing the stock seat.
The seat can be installed with the same key as the stock seat, and no modification to the vehicle body is required.
Plain black leather throughout, stitched seams all round the centre of the seat.
Thick stitching threads are carefully sewn in, so it looks as if the vehicle has been upgraded with just one seat replacement.
It is made of injection sponge, which is fired in the mold, so it has good cushioning and does not change with age, so you can use it for a long time.
The sponge and the base of the seat are not glued together afterwards, but molded in one piece in the mold, so there is no seam when the leather is applied.
[finish stitching line]
The stitching lines are usually finished with black stitching, but it is also possible to finish with piping, in which the leather is wrapped around an octopus thread.
[Sponge hardness adjustment]
・Standard
If you weigh 60-80kg, this setting is for you.
・Hard sponge
Recommended for people weighing over 80kg.
・Sponge soft
Recommended for people weighing less than 60kg.
Caution
*Images may contain other products.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
CT125
