- Beranda
- Motor
- HONDA 51 - 125cc
- CT125 Hunter Cub
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Jok
- K&H
- K&H: Jok Jahitan Tipe A Broad Bean
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Jok tinggi] Broad bean tinggi: 820 mm (jok OEM: 800 mm)
[Ukuran plat nama]
Panjang: 13mm x Lebar: 50mm (black / red, black / black, white, white / red)
Panjang: 20mm x Lebar: 70mm (brass, copper) [seat height] fava bean high:820mm (stock seat.)800mm)
[nameplate size]
Vertical:13mmX width :50mm(Black/Red,Black/Black,White,White/Red)
Vertical:20mmX width :70mm(Brass,Copper)
[Ukuran plat nama]
Panjang: 13mm x Lebar: 50mm (black / red, black / black, white, white / red)
Panjang: 20mm x Lebar: 70mm (brass, copper) [seat height] fava bean high:820mm (stock seat.)800mm)
[nameplate size]
Vertical:13mmX width :50mm(Black/Red,Black/Black,White,White/Red)
Vertical:20mmX width :70mm(Brass,Copper)
[Deskripsi]
Permukaan kursi 20mm lebih tinggi dari OEMSeat, tetapi bentuk bagian yang menyentuh paha bagian dalam saat kaki diturunkan telah dirancang agar permukaan kursi hampir sama dengan OEMSeat.. Kami telah mencapai pijakan.
Karena posisi duduk lebih tinggi, lutut ditekuk lebih lembut, dan lebih dekat dengan postur berdiri, sehingga memudahkan pengoperasian kendaraan dengan beban pijakan kaki..
Beban footpeg meningkat dan beban di bokong (kursi) relatif berkurang dan beban berkurang ..
Dengan membuat bagian yang mengenai paha bagian dalam depan menjadi bentuk yang unik, memungkinkan untuk menahan badan mobil seolah-olah memakai pegangan lutut..
Itu memudahkan untuk menstabilkan kendaraan saat memuat kargo atau goyangan pada kecepatan yang sangat rendah..
Dengan menambah ketebalan Sponge, kenyamanan berkendara jauh lebih baik, jadi kami merekomendasikan kursi ini untuk touring jarak jauh..
[Karakteristik]
Desain Eksklusif oleh K&HOriginal dari dasar Kursi..
Dapat digunakan sebagai pengganti OEMSeat.
Kursi dipasang dengan kunci seperti OEMSeat dan tidak diperlukan modifikasi pada bodi ..
Kulit hitam polos di seluruh, semua jahitan di sekitar pusat kursi dijahit.
Benang Jahitan yang tebal dijahit dengan hati-hati, sehingga terlihat seperti mobil diupgrade hanya dengan mengganti Jok..
Karena kami menggunakan spons injeksi yang dibakar dalam cetakan, memiliki sifat bantalan yang baik dan sedikit perubahan selama bertahun-tahun, Anda dapat menggunakannya untuk waktu yang lama ..
Sponge dan Dudukan alas tidak direkatkan setelah itu tetapi dibentuk dalam cetakan menjadi satu, jadi tidak ada sambungan saat mengaplikasikan kulit ..
[Finishing Garis Jahitan]
Garis jahitan biasanya diselesaikan dengan BlackStitch, tetapi juga dapat diselesaikan dengan Piping, di mana kulit dililitkan di sekitar benang gurita.
[Spons menyesuaikan kekerasan]
standar
Jika Anda memiliki berat 60-80kg, ini adalah pengaturan untuk Anda..
spons keras
Pengaturan ini direkomendasikan untuk orang dengan berat 80 kg atau lebih..
Spons lembut
Pengaturan ini direkomendasikan untuk orang dengan berat kurang dari 60kg.
The seat surface is 20mm higher than the stock seat, but by shaping the part of the seat that touches the inner thighs when lowering the legs, we have achieved almost the same footing as the stock seat.
Because the seating position is higher, the knees bend more gently, and it is closer to a standing posture, which makes it easier to operate the vehicle with a step load.
The step load is increased, and the load on the buttocks (seat) is relatively decreased, and the burden is reduced.
The unique shape of the front part that touches the inner thigh makes it possible to hold the vehicle body as if you were wearing a knee grip.
It makes it easier to stabilize the vehicle when loading cargo or wobbling at very low speeds.
This seat is recommended for long distance touring because the sponge is thicker and more comfortable.
[Features]
The seat base is specially designed by K&H.
It can be used by replacing the stock seat.
The seat can be installed with the same key as the stock seat, and no modification to the vehicle body is required.
Plain black leather throughout, stitched seams all round the centre of the seat.
Thick stitching threads are carefully sewn in, so it looks as if the vehicle has been upgraded with just one seat replacement.
It is made of injection sponge, which is fired in the mold, so it has good cushioning and does not change with age, so you can use it for a long time.
The sponge and the base of the seat are not glued together afterwards, but molded in one piece in the mold, so there is no seam when the leather is applied.
[finish stitching line]
The stitching lines are usually finished with black stitching, but it is also possible to finish with piping, in which the leather is wrapped around an octopus thread.
[Sponge hardness adjustment]
・Standard
If you weigh 60-80kg, this setting is for you.
・Hard sponge
Recommended for people weighing over 80kg.
・Sponge soft
Recommended for people weighing less than 60kg.
Karena posisi duduk lebih tinggi, lutut ditekuk lebih lembut, dan lebih dekat dengan postur berdiri, sehingga memudahkan pengoperasian kendaraan dengan beban pijakan kaki..
Beban footpeg meningkat dan beban di bokong (kursi) relatif berkurang dan beban berkurang ..
Dengan membuat bagian yang mengenai paha bagian dalam depan menjadi bentuk yang unik, memungkinkan untuk menahan badan mobil seolah-olah memakai pegangan lutut..
Itu memudahkan untuk menstabilkan kendaraan saat memuat kargo atau goyangan pada kecepatan yang sangat rendah..
Dengan menambah ketebalan Sponge, kenyamanan berkendara jauh lebih baik, jadi kami merekomendasikan kursi ini untuk touring jarak jauh..
[Karakteristik]
Desain Eksklusif oleh K&HOriginal dari dasar Kursi..
Dapat digunakan sebagai pengganti OEMSeat.
Kursi dipasang dengan kunci seperti OEMSeat dan tidak diperlukan modifikasi pada bodi ..
Kulit hitam polos di seluruh, semua jahitan di sekitar pusat kursi dijahit.
Benang Jahitan yang tebal dijahit dengan hati-hati, sehingga terlihat seperti mobil diupgrade hanya dengan mengganti Jok..
Karena kami menggunakan spons injeksi yang dibakar dalam cetakan, memiliki sifat bantalan yang baik dan sedikit perubahan selama bertahun-tahun, Anda dapat menggunakannya untuk waktu yang lama ..
Sponge dan Dudukan alas tidak direkatkan setelah itu tetapi dibentuk dalam cetakan menjadi satu, jadi tidak ada sambungan saat mengaplikasikan kulit ..
[Finishing Garis Jahitan]
Garis jahitan biasanya diselesaikan dengan BlackStitch, tetapi juga dapat diselesaikan dengan Piping, di mana kulit dililitkan di sekitar benang gurita.
[Spons menyesuaikan kekerasan]
standar
Jika Anda memiliki berat 60-80kg, ini adalah pengaturan untuk Anda..
spons keras
Pengaturan ini direkomendasikan untuk orang dengan berat 80 kg atau lebih..
Spons lembut
Pengaturan ini direkomendasikan untuk orang dengan berat kurang dari 60kg.
The seat surface is 20mm higher than the stock seat, but by shaping the part of the seat that touches the inner thighs when lowering the legs, we have achieved almost the same footing as the stock seat.
Because the seating position is higher, the knees bend more gently, and it is closer to a standing posture, which makes it easier to operate the vehicle with a step load.
The step load is increased, and the load on the buttocks (seat) is relatively decreased, and the burden is reduced.
The unique shape of the front part that touches the inner thigh makes it possible to hold the vehicle body as if you were wearing a knee grip.
It makes it easier to stabilize the vehicle when loading cargo or wobbling at very low speeds.
This seat is recommended for long distance touring because the sponge is thicker and more comfortable.
[Features]
The seat base is specially designed by K&H.
It can be used by replacing the stock seat.
The seat can be installed with the same key as the stock seat, and no modification to the vehicle body is required.
Plain black leather throughout, stitched seams all round the centre of the seat.
Thick stitching threads are carefully sewn in, so it looks as if the vehicle has been upgraded with just one seat replacement.
It is made of injection sponge, which is fired in the mold, so it has good cushioning and does not change with age, so you can use it for a long time.
The sponge and the base of the seat are not glued together afterwards, but molded in one piece in the mold, so there is no seam when the leather is applied.
[finish stitching line]
The stitching lines are usually finished with black stitching, but it is also possible to finish with piping, in which the leather is wrapped around an octopus thread.
[Sponge hardness adjustment]
・Standard
If you weigh 60-80kg, this setting is for you.
・Hard sponge
Recommended for people weighing over 80kg.
・Sponge soft
Recommended for people weighing less than 60kg.
Peringatan
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Foto produk mungkin memuat sparepart lainnya. *Images may contain other products.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
*Foto produk mungkin memuat sparepart lainnya. *Images may contain other products.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/