Model Name:CROSS CUB

Manufacturer:HONDA

Model Year:2013

Its design matched with both the street and off-road courses. It came in stylish colors. Its upright riding position and wide handlebar raised the comfort level of the weekend ride.

The 4-stroke engine generated strong output characteristics at low-mid rpm range. And along with its 4-speed gear, it travelled in a light and powerful manner. Its vaunted engine generated excellent fuel consumption performance (62.5km/L) and was extremely cost effective. It also saved extra fuel by the adoption of PFM-FI, and by incorporating a catalyzer to its exhaust system, it suppressed the discharge of gas. It was environmentally friendly.

With its telescopic front suspension that absorbed collision force and a rigid square cross-section pipe frame, it travelled in a stable manner.

Specifications:

[Basic spec]

Manufacturer	HONDA	Engine Type	Air-Cooled 4 Stroke Single Cylinder OHC
Model Name	CROSS CUB	Starter	Combined Usage of Cell and Kick Starter
Grade	–	Maximum Output (ps)	8.0ps(5.9kw)/7500rpm
Drive Train	–	Maximum Torque (kgf/m)	0.87kg-m(8.5N-m)/5500rpm
Model Type	EBJ-JA10	Curb Weight	105
Displacement	109	Dry Weight	99(Approximate Value)
Sales Launch Year	2013/6	Fuel Efficiency by Catalog	62.5 km/L (at 60 km/h)
Height/Width/Length	1150/155/1945	Fuel Tank Capacity	4.3
Seat Height	784	Distance to Empty	–
Front Tire Indication	2.75-17 41P	Fuel Supply	Injection
Rear Tire Indication	2.75-17 41P

[Service data]

Standard Plug	CPR6EA-9S	Chain Size	420
Number of Used Plugs	1	Chain Link Number	102
Engine Oil Amount	1	Battery Code	–
Engine Oil (Refill)	0.8L	Headlight	12V-35/35W
Engine Oil (Element Replacement)	–	Headlight Type	–
Front Blinker Rating	12V-10W x 2	Headlight Remarks	–
Drive Sprocket Teeth Number	–	Tail Light Rating	12V-21/5W
Driven Sprocket Teeth Number	–	Rear Blinker Rating	12V-10W x 2

[Machine detail]

Motor Model Code	JA10E	Caster Angle	27.0 Degrees
Bore (mm)	50	Trail (mm)	82
Storke (mm)	55.6	Minimum Ground Clearance	155
Compression Ratio	9	Distance Between Axes	1225
Ignition Method	Transistor Ignition	Streering Angle (Right)	–
Engine Lubrication Type	Force Feeding & Splash	Turning Angle (Left)	–
Frame Type	Diamond/Backbone Frame/Twin Spar	Mirror Screw Hole Diameter	–
Minimum Rotaion Radius	1.9	Fuel Tank Reserve Capacity	–

[Underbody detail]

Front Brake Type	Drum	Suspension Type (Rear)	Swing Arm
Front Brake Remarks	–	Number of Rear Shock Absorbers	2
Rear Brake Type	Drum	Rear Suspension Stroke	–
Rear Brake Remarks	–	Rear Wheel Travel	–
Suspension Type (Front)	Telescopic	ABS	–
Front Fork Type	Upright Fork	Drive Train	Chain
Front Suspension Stroke	–	Differential Oil Amount	–
Front Fork Diameter	–	Chain Remarks	–

[Equipment]

Seat Lowering Allowance	–	Theft Prevention Device	–
Mirror Screw Hole Diameter	–	Tail Light Bulb Type	–
Mirror Remarks	–	Tail Light Base Shape	–
Electronic Device Remarks	–	Tail Light Base Shape 2	–
Fuel Gauge	–	Tail Light Remarks	–
Clock	–	Front Blinker Bulb Type	–
Hazard	–	Front Blinker Base Shape	–

[Engine detail]

Clutch Type	Wet Type	Tappet Clearance (mm) EX	–
Transmission	Normal Shift	Idling Initial Value (rpm)	1.400 plus-minus 100(rpm)
Number of Gears	4	Needle Steps (Clip Location)	–
Gear Ratio	2.615 / 1.555 / 1.136 / 0.916	Float Level (mm)	–
Primary Reduction Ratio	4.058	Air Screw Return	–
Secondary Reduction Ratio	2.642	Main Jet Type	–
Variable Speed Vehicle Gear Ratio	–	Main Jet Number	–
Tappet Clearance (mm) IN	–

[Other spec]

Clutch Cable Length	–	Rear Brake Cable Length	–
Choke Cable Length	–	Other Cables	–
Meter Cable Length	–	Engine Number (Production Launch)	–
Throttle Cable Length	–	Engine Number (Production End)	–
Front Brake Cable Length	–

[See Moto Index of HONDA]
[See Accessories for HONDA CROSS CUB]