Model Name:SUPER CUB 110

Manufacturer:HONDA

Model Year:2012

This SUPERCUB110 is equipped with an air-cooled 4-stroke single cylinder engine that has power, cost-efficiency, quietness and credibility. With its torque characteristics that focuses on low-mid rpm range and its optimum speed reduction ratio, it demonstrates powerful travelling and easy maneuvering even when heavy luggage are loaded or in case of a hill start.
By using the electronically controlled fuel injection device (PGM-FI), the computer judges the riding condition and adjusts the amount and timing of the fuel injection to its ideal value. Since it uses the fuel without any waste, it is also environmentally friendly and cost effective.
It demonstrates powerful travelling by always combusting the fuel in an ideal condition. It is always tough even at hill start or in case of acceleration.
Also, the engine starts smoothly regardless of the ambient weather condition. Even if the battery goes dead, you can easily start the bike using its kick starter.

SUPERCUB110 adopts a backbone frame that uses rigid square cross-section pipe frame. By minimizing the shared load difference of its front and rear wheels, it achieves stable maneuvering, even when luggage are loaded.
It is designed with a “Telescopic Front Suspension” that softens the impact from the road surface, a “2 Stage Clutch System” that incorporates two separate clutches for take off and gear change, a seat height of 735mm, and a comfortable riding position; all of which provide comfort and user-friendliness feeling for your everyday use.

By the use of the PGM-FI that always supply an optimum amount of fuel according to the driving condition, SUPERCUB110 demonstrates an excellent fuel efficiency.
Also, it has a 4.3L fuel tank. It can hold enough fuel for long-distance travelling.
You can check the remaining fuel amount by looking at the fuel gauge inside the meter panel even while you are riding the bike.

Specifications:

[Basic spec]

Manufacturer	HONDA	Engine Type	Air-Cooled 4 Cycle OHC Single Cylinder
Model Name	SUPER CUB 110	Starter	Combined Usage of Cell and Kick Starter
Grade	–	Maximum Output (ps)	8.0ps(5.9kw)/7500rpm
Drive Train	–	Maximum Torque (kgf/m)	0.87kg-m(8.5N-m)/5500rpm
Model Type	JA10	Curb Weight	98
Displacement	109	Dry Weight	92(Approximate Value)
Sales Launch Year	2012/3	Fuel Efficiency by Catalog	63.5 km/L (at 60 km/h)
Height/Width/Length	1050/135/1915	Fuel Tank Capacity	4.3
Seat Height	735	Distance to Empty	–
Front Tire Indication	70/90-17 38P	Fuel Supply	Injection
Rear Tire Indication	80/90-17 44P

[Service data]

Standard Plug	CPR6EA-9S	Chain Size	420
Number of Used Plugs	1	Chain Link Number	100
Engine Oil Amount	1	Battery Code	–
Engine Oil (Refill)	0.8L	Headlight	–
Engine Oil (Element Replacement)	–	Headlight Type	–
Front Blinker Rating	–	Headlight Remarks	–
Drive Sprocket Teeth Number	–	Tail Light Rating	–
Driven Sprocket Teeth Number	–	Rear Blinker Rating	–

[Machine detail]

Motor Model Code	JA10E	Caster Angle	26.5 Degrees
Bore (mm)	50	Trail (mm)	73
Storke (mm)	55.6	Minimum Ground Clearance	135
Compression Ratio	9	Distance Between Axes	1210
Ignition Method	Full Transistor Type Battery Ignition	Streering Angle (Right)	–
Engine Lubrication Type	Force Feeding & Splash	Turning Angle (Left)	–
Frame Type	Backbone Frame	Mirror Screw Hole Diameter	–
Minimum Rotaion Radius	1.9	Fuel Tank Reserve Capacity	–

[Underbody detail]

Front Brake Type	Mechanical Leading/Trailing	Suspension Type (Rear)	Swing Arm
Front Brake Remarks	–	Number of Rear Shock Absorbers	2
Rear Brake Type	Mechanical Leading Trailing	Rear Suspension Stroke	–
Rear Brake Remarks	–	Rear Wheel Travel	–
Suspension Type (Front)	Telescopic	ABS	–
Front Fork Type	Upright Fork	Drive Train	Chain
Front Suspension Stroke	–	Differential Oil Amount	–
Front Fork Diameter	–	Chain Remarks	–

[Equipment]

Seat Lowering Allowance	–	Theft Prevention Device	Available
Mirror Screw Hole Diameter	–	Tail Light Bulb Type	–
Mirror Remarks	–	Tail Light Base Shape	–
Electronic Device Remarks	–	Tail Light Base Shape 2	–
Fuel Gauge	Available	Tail Light Remarks	–
Clock	–	Front Blinker Bulb Type	–
Hazard	–	Front Blinker Base Shape	–

[Engine detail]

Clutch Type	–	Tappet Clearance (mm) EX	–
Transmission	Permanently Engaged 4-Stage Normal Shift	Idling Initial Value (rpm)	–
Number of Gears	4	Needle Steps (Clip Location)	–
Gear Ratio	2.615 / 1.555 / 1.136 / 0.916	Float Level (mm)	–
Primary Reduction Ratio	4.058	Air Screw Return	–
Secondary Reduction Ratio	2.5	Main Jet Type	–
Variable Speed Vehicle Gear Ratio	–	Main Jet Number	–
Tappet Clearance (mm) IN	–

[Other spec]

Clutch Cable Length	–	Rear Brake Cable Length	–
Choke Cable Length	–	Other Cables	–
Meter Cable Length	–	Engine Number (Production Launch)	–
Throttle Cable Length	–	Engine Number (Production End)	–
Front Brake Cable Length	–

[See Moto Index of HONDA]
[See Accessories for HONDA SUPER CUB 110]