[Spec. ] ・Speedometer:-199km/h(124MPH) With speed warning light and maximum speed record Correction is possible when replacing the F/Rear Sprocket or changing the tire size. ・Odometer:-99999km(99999 mile) With UserOdo function that can start from any value ・Trip meterA/B:-9999.9km(9999.9 mile) Oil exchange distance meter:500-6000km(Setting unit:500km)(300-3900mile) Minus is displayed when it becomes less than 0km.. Target Distance Setting Range (10m Units):12-hour Display RunningTime (Running time meter):-99 hours 59 minutes (in 1 minute increments),100 hours-(in 1 hour increments) Hour meter (Engine operating hour meter):-99 hours 59 minutes (in 1 minute increments),100 hours-(in 1 hour increments) Engine temperature clock:Minus10-180 degrees (14-356 degrees Fahrenheit)*2 With high temperature warning light Voltage Meter:8V-18V ・Tachometer:-10000 or -13000rpm Display Range switch function (10000rpm for normal engine, 13000rpm for modified car), High RPM record ・Shift indicator Green Light→Red→Green Light&Red(Both blink). Each rotation speed can be set as desired. ・Gear position* Support for changing the reduction ratio when using an external Cross Mission (the largest 6-speed) Fuel Gauge:Fulcrum adjustment width6 steps Opening display:Select from 2 types ・BodySize:W128mmXH98mmXD52mm Body Size:DC10-16V
[Function] Speedometer: 0-360km/h Tire Circumference Setting (Setting range 50-210% Setting unit 1%) Speed Warning Light (Setting range 30-360km/h setting unit 1km/h) Pointer Type Tachometer: 0-13000rpm Rotation Speed Warning Light (Setting Range: 1000-13000rpm Setting Unit: 100rpm) Ignition Setting (Setting Range 0.5/1-24) Odometer: 0-999999km (Display Unit: When the range exceeds 1km, it will return to 0) Total Mileage/User Odo Setting Trip Meter A, B: 0-9999.9km (Display unit: Returns to 0 when the range exceeds 0.1km) Trip Meter B Display/non-display setting Maintenance Trip distance: The entered trip distance is automatically reduced by running. Maintenance distance (notification mode) (Setting range: OFF, 500-16000km Setting unit: 100km) *OFF is not displayed Gear position (Display contents: OFF, all gears) *OFF is not shown Gear number registration function by learning mode Fuel meter (display range: 6 levels) Fuel Sensor Resistance Preset: Ω100, Ω250, Ω270, Ω390, Ω510, Ω1200 User resistance value setting Resistance value range: Ω1-1500 Fuel warning light Backlight: Brightness (Setting range: 1~5 (dark~Bright) Lighting colors: Red, Orange, Yellow, Green, Blue, Sky, Purple, White Clock (Setting range: 12-hours or 24-hours) Voltmeter (Display range: 8-18V) Voltage warning light (Setting range: 8-18V Setting unit: 0.1V) Thermometer (Display range: 0-150 degrees) The temperature at the drain bolt can be measured by purchasing a SP TAKEGAWA drain bolt. Temperature warning light (setting range: 0-150 degrees)
[Indicator light] Warning light (Speed/top gear/mileage/fuel/battery low voltage/temperature/rotation speed *Lights when setting items) / neutral lamp, high Muranpu-turn lamp, fuel level warning lamp, ABS lamp, engine check lamp [External Switch] Use the external switch that comes with the meter for all meter operations and function settings.
[Specification] ・White LED lighting ・Shift UP warning lamp ・Digital voltmeter ・Highest value memory function ・Approximate installation time: 1.0h ・Φ60/9000rpm display
●9000rpm display (with maximum rpm memory function) ●Backlight is white LED specification ●Shift indicator (red) function included / Opening function included ●Rubber mounts are used on the brackets to prevent vibration
[Spec. ] ・Tachometer:-19900rpm High RPM record ・Hour meter:-9999H Voltage Meter:8V-18V 7SegmentX4 Green LED Transmissive Display TouchSensor type operation Button (Right Front) ・BodySize:W57mmXH29mmXD10mm Equivalent to IP66 (no harmful effects from water jets from any direction) Body Size:DC10-16V
Guideline type electric tachometer: 12500 rpm (with rev indicator) Stainless steel body Body size: Φ48mm Screw size: M4 x 18mm Mounting Pitch :37mm Meter bracket: Steel with black paint finish Rubber mount type bracket included Installation time:1.3H
Odometer: 0-99999999km (display unit: Returns to 0 when 1 km range is exceeded) Total mileage User-odd setting (start point distance optional input)
Trip meters A, B: 0-9999.9km (display unit: Returns to 0 when 0.1 km range is exceeded) Show / Hide setting of Trip Meter B
Maintenance mileage The entered mileage will be automatically decreased as you drive. Maintenance distance (notification mode) (Setting range: OFF, 500-16000km Setting Unit: 100km) *OFF is not displayed
Gear position (Display contents: OFF, All gears (displayed up to 9)) *OFF is hidden Gear number registration function by learning mode
Indicator lamps Warning lights (speed/mileage/fuel/battery low voltage / temperature / rpm *light when item is set), Neutral lamp, High beam lamp, Turn lamp, Fuel level warning lamp, ABS lamp, Engine check lamp (For bikes without ABS, the ABS lamp can be hidden.)