Color: Black For upright Φ43 [Specifications] Fork pitch: 210mm Wing volume: 30mm Top bridge: 30mm thick Under bracket: 60mm thickness [Material] Top bridge, under bracket, post: AP2000 (High strength material with low distortion and excellent dimensional accuracy) Stem shaft: A7075 (Highest strength super duralumin, highest strength among aluminum alloys)
Compatible with TPS (retrofit) compatible with plug cord / cap Code Marker with Clamp Crimped cord connector
Components
・SP2 control unit (K.Z1/2) ・Timing rotor (Z1/2) ・Pickup assembly (Z1/2) ・SP2 ignition coil (2P) with bracket (90-102mm) x 1 ・SP2 ignition coil (2P) H, with bracket (90-102mm) x 1 ・Harness for unit (with connector, wiring, and connection connector set) ・Coil primary connector ・One 8 x 45mm bolt (for timing rotor) ・8 x 35mm bolt x 1 (for timing rotor, for Z1000J and later) ・6 x 30mm bolts x 4 (for SPII coil mounting) ・6 x 15mm spacers x 4 (for SPII coil mounting) ・5 x 15mm bolts x 3 (for timing plate mounting) ・5mm washer x 3 (for timing plate installation) ・5 x 5mm spacers x 3 (for timing plate mounting) ・Double-sided adhesive sheet, cable tie (30cm) (for fixing control unit) ・Tie-wraps (15cm) x 5 (for harness attachment) ・Connector crimped plug cord (1m) x 2 ・Rubber boots x 4 ・Plug cap x 4 ・Code markers (1-4) x 2 sets ・Cord clamps x 4
[Material] Rubber [Specification] Non-penetrating Type for Φ22.2mm Handlebar [Size] R Side Inner Diameter: Φ24mm L Side Inner Diameter: Φ19mm Grip Overall Length: 120mm Grip Inner Length: 115mm
[Material] ・Pipe: Steel ・Silencer: Aluminum [Volume] Proximity exhaust noise: 102dB [Specification] Z1/Z2, Z1-R, Z1000MK2 can be installed. [Maintenance Data] ・Removing and installing the oil drain bolt: x ・Change oil filter: x ・Whether center stand can be used or not: x
Type with reserve tank [Spring color] Black [Size] ・Total length: 390mm ・Pitch: 353mm ・Stroke: 75mm ・Frame side: Φ14mm ・Swingarm side: Φ14mm [Specification] ・Damping adjustment: 4 stages each for elongation side and pressure side ・With preload adjuster, stepless type 35mm
[Components] ・Assembly part ・Tail pipe ・8 springs ・Silencer ・End baffle ・Silencer band ・Silencer Bracket ・Exhaust pipe per vehicle
[Maintenance Data] ・Drain bolt: Manifold section needs to be detached ・Change oil filter: Manifold section needs to be detached ・Center stand: Not available