I want to install it on Simple.

I bought this to install a NISSIN 4POTCaliper around NSR250R (MC21) on my Kawasaki Zr-7S.
If I am going to go to the trouble of changing the hose, I wanted to make the Brake hose simple and parenthesis-friendly, so I was considering various options.
When the Brake Caliper was temporarily attached, it was found that the banjo position faces almost straight up.
To begin with, I looked on the Net to see what the handling of the NSR250ROEM was like, and it seemed to have a Banjo angle of almost 90-degrees.

I considered a similar arrangement, but it seems like the load would build up at the 90-degrees bend…… or something like that.
I was thinking that if I were to attach a stainless banjo&banjo bolt, I would have to choose a stainless banjo&banjo bolt and it would be too heavy.

Suddenly, I looked at the motorcycle parked next to me in the parking lot and saw a Brake Caliper with a Brake hose installed by Straight and thought, COLLEDA!

When we looked into it, we found that the durability from Active is also relatively safe Material:A Stainless Steel Brake Fitting Adapter was available.
Since the Brake CaliperBody is undergoing overhaul, it is not yet ready for full-scale use, but the angle looks good as long as it is temporarily attached.
With this, the front brake area can be built simply and stylishly.
Definitely Material if you buy it as For Street.:Stainless Steel is a Recommendation.

Saya ingin menginstalnya di Simple.

Saya membeli ini untuk memasang NISSIN 4POTCaliper di sekitar NSR250R (MC21) di Kawasaki Zr-7S saya.
Jika saya akan repot mengganti selang, saya ingin membuat selang Rem sederhana dan ramah kurung, jadi saya mempertimbangkan berbagai opsi.
Saat Brake Caliper dipasang sementara, ternyata posisi banjo menghadap hampir lurus ke atas.
Untuk memulainya, saya melihat di Net untuk melihat seperti apa penanganan NSR250ROEM, dan sepertinya memiliki sudut Banjo hampir 90 derajat.

Saya mempertimbangkan pengaturan yang serupa, tetapi sepertinya beban akan menumpuk di tikungan 90 derajat ...... atau sesuatu seperti itu.
Saya berpikir bahwa jika saya memasang baut banjo&banjo stainless, saya harus memilih baut banjo&banjo stainless dan itu akan terlalu berat.

Tiba-tiba, saya melihat sepeda motor yang diparkir di sebelah saya di tempat parkir dan melihat Kaliper Rem dengan selang Rem dipasang oleh Lurus dan berpikir, COLLEDA!

Ketika kami memeriksanya, kami menemukan bahwa daya tahan dari Active juga relatif aman. Bahan: Tersedia Adaptor Pemasangan Rem Stainless Steel.
Karena Brake CaliperBody sedang menjalani perbaikan, ia belum siap untuk penggunaan skala penuh, tetapi sudutnya terlihat bagus selama terpasang sementara.
Dengan ini, area rem depan dapat dibangun dengan sederhana dan penuh gaya.
Pasti Bahan jika Anda membelinya sebagai Untuk Jalan.:Stainless Steel adalah Rekomendasi.