- Home
- Product reviews
- Motorcycle Parts
- Engine Parts
- Intake Parts
- Fuel Tuning Kit / Setting Kit
- KSR80 carburetor adjustment... (KEYSTER: Carburetor Fuel Adjustment Kit)
【KEYSTER】Carburetor Fuel Adjustment Kit Review
KSR80 carburetor adjustment
KSR80, but the carburetor seemed to be overflowing.
So I thought about replacing the Needle Valve.
The OEM Needle Valve Assembly is still available from the manufacturer, but it will cost 300 If you're willing to pay close to 300 yen, you can get a fuel regulating part for 4400 yen from Quantity:I wanted to buy a product from Key Star that was in the Set.
I have almost all the parts I need for the carburetor overhaul, plus a few parts in LargeSmall and Quantity to adjust for fuel economy.:It is set. 。 It also comes with an instruction manual for fuel tuning, which is very useful.
The main purpose was to replace the Needle Valve, but I also wanted to adjust the bumpy feeling in the middle range of the Axel, which is unique to KSR, so this is a very good introduction to carburetor adjustment for beginners.:It was Set
I wanted to replace the Needle Jet when I replaced the Main Jet, but the Washer, the part that goes between the Main Jet and the Needle Jet, was not in Quantity.:I did not replace the Needle Jet this time because it was not included in the set. 。 I plan to purchase the missing Washer from OEM Parts at a later date and replace the Needle Jet.
As a result, with the air cleaner shielding removed and the PRO's Kill silencer in place, I settled on MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-stage. SJ #29.0, Jet needle”S”Clip 2-stage I settled on MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-stage.
Penyesuaian karburator KSR80
KSR80, tetapi karburatornya tampak meluap.
Jadi saya berpikir untuk mengganti Needle Valve.
Perakitan Katup Jarum OEM masih tersedia dari pabrikan, tetapi biayanya 300 Jika Anda bersedia membayar hampir 300 yen, Anda bisa mendapatkan suku cadang pengatur bahan bakar seharga 4400 yen dari Kuantitas:Saya ingin membeli produk dari Key Bintang yang ada di Set.
Saya memiliki hampir semua suku cadang yang saya perlukan untuk perbaikan karburator, ditambah beberapa suku cadang dalam Ukuran BesarKecil dan Kuantitas untuk menyesuaikan penghematan bahan bakar.:Sudah diatur. Ini juga dilengkapi dengan instruksi manual untuk penyetelan bahan bakar, yang sangat berguna.
Tujuan utamanya adalah untuk mengganti Katup Jarum, tetapi saya juga ingin menyesuaikan perasaan bergelombang di kisaran tengah Axel, yang unik untuk KSR, jadi ini adalah pengantar yang sangat baik untuk penyesuaian karburator untuk pemula.:Sudah Ditetapkan
Saya ingin mengganti Needle Jet ketika saya mengganti Main Jet, tetapi Washer, bagian yang berada di antara Main Jet dan Needle Jet, tidak dalam Jumlah.: Kali ini saya tidak mengganti Needle Jet karena tidak termasuk dalam himpunan. Saya berencana untuk membeli Mesin Cuci yang hilang dari Suku Cadang OEM di kemudian hari dan mengganti Jet Jarum.
Hasilnya, dengan pelepasan pelindung pembersih udara dan peredam Kill PRO di tempatnya, saya memilih MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-tahap. SJ #29.0, Jet needle”S”Clip 2-tahap Saya memilih MJ #82.5, SJ #29.0, Jet needle”S”Clip 2-tahap.