- Home
- Product reviews
- Motorcycle Parts
- Electrical
- Lights
- Other Bulb / Light Bulb
- Other Bulb / Light Bulb
- Overcurrent cuts it off quickly.... (M&H MATSUSHIMA: Single Base Bulb G18 BA15S)
【M&H MATSUSHIMA】Single Base Bulb G18 BA15S Review
Overcurrent cuts it off quickly.
I used it on my FZ750 tail lamp.
The product itself is made in Japan with no problems.
The problem is in my FZ, probably due to a weak Regulator, which causes an overcurrent situation when fully open for long periods of time, such as Circuit.
When I did so, there was a high probability that the tail lamp went out.
Again, it's not the product's fault, it's my fault for poor maintenance.
But on the other hand, when I changed the tail lamp to LED, it did not turn off even in this state.
In terms of resistance to external factors, LEDs seem to be the way to go.
After this, another part was broken by the overcurrent.
The cause of the problem has been identified and addressed, and there are no further problems.
Overcurrent is dangerous because of the flames.
Arus lebih memotongnya dengan cepat.
Saya menggunakannya pada lampu belakang FZ750 saya.
Produknya sendiri dibuat di Jepang tanpa masalah.
Masalahnya ada di FZ saya, mungkin karena Regulator yang lemah, yang menyebabkan situasi arus lebih ketika terbuka penuh untuk jangka waktu yang lama, seperti Sirkuit.
Ketika saya melakukannya, ada kemungkinan besar bahwa lampu belakang padam.
Sekali lagi, ini bukan kesalahan produk, ini kesalahan saya karena perawatannya yang buruk.
Tapi di sisi lain, ketika saya mengganti lampu belakang ke LED, itu tidak mati bahkan dalam kondisi ini.
Dalam hal ketahanan terhadap faktor eksternal, LED tampaknya menjadi pilihan yang tepat.
Setelah ini, bagian lain rusak oleh arus lebih.
Penyebab masalah telah diidentifikasi dan ditangani, dan tidak ada masalah lebih lanjut.
Arus lebih berbahaya karena api.