- Home
- Product reviews
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Suspensions
- Other Front Fork Parts
- Expected... (YSS: PD Valve)
【YSS】PD Valve Review
Expected
Wearing a NINJA400 (2020, 2BL-EX400G), POSH Used in conjunction with Initial AdjusterType2
When I put the PD Fork Valve on the NINJA2 Helmet 50SL, the thrust is reduced and the valve is not as strong as it should be I put them on my NINJA 400 because the suspension was so supple and felt so good As I expected, the ride is now more comfortable with less upward thrust and less expense I'm happy with it
The in-law of the cylinder unit of the Ninja 400 (outer diameter approx. 33.5) has an inner diameter of 27.6mm since the in-law of the cylinder unit (approx. 33.5) of the NINJA400 has an inner diameter of 27.6mm, the quantity:Set internal diameter of 26mm (outer diameter 33.5) PD Valve is selected (PDSpacer is not used.)
The holes on the cylinder unit side of NINJA400 were changed from the original holes X2 to φ8 Add two φ8x2 specs Total φ8x4 spec
The oil level is set to the standard value of 88±2 If you set the air spring to 110mm at first, the effect of the air spring is weak and the amount of strokes of the deceleration will be lowered Large size
Spacer is the InitialAdjusterType2 of POSH that I replaced with this time I used the included Spacer with a 14.5mm Cut
The PD Valve itself should not be difficult to install, but the problem is that the NINJA 400 I guess the removal of the middle cowl is a hassle
Mengharapkan
Mengenakan NINJA400 (2020, 2BL-EX400G), POSH Digunakan bersama dengan Initial AdjusterType2
Saat saya memasang PD Fork Valve pada Helm NINJA2 50SL, daya dorong berkurang dan klep tidak sekuat yang seharusnya saya pasang di NINJA 400 saya karena suspensinya begitu kenyal dan terasa sangat enak Seperti yang saya harapkan, berkendara sekarang lebih nyaman dengan dorongan ke atas yang lebih sedikit dan biaya yang lebih sedikit Saya senang dengan itu
Menantu unit silinder Ninja 400 (diameter luar sekitar 33,5) memiliki diameter dalam 27.6mm karena menantu unit silinder (sekitar 33.5) NINJA400 memiliki diameter dalam 27.6mm , jumlah: Atur diameter internal 26mm (diameter luar 33,5) PD Valve dipilih (PDSpacer tidak digunakan.)
Lubang di sisi unit silinder NINJA400 diubah dari lubang asli X2 menjadi 8 Tambahkan dua spesifikasi 8x2 Total spesifikasi 8x4
Level oli disetel ke nilai standar 88±2 Jika Anda menyetel pegas udara ke 110mm pada awalnya, efek pegas udara lemah dan jumlah pukulan deselerasi akan diturunkan Ukuran besar
Spacer adalah InitialAdjusterType2 dari POSH yang saya ganti kali ini saya menggunakan Spacer yang disertakan dengan Potongan 14.5mm
PD Valve sendiri seharusnya tidak sulit untuk dipasang, tetapi masalahnya adalah bahwa NINJA 400 saya kira melepas penutup tengah itu merepotkan