- Home
- Product reviews
- Motorcycle Parts
- Handles & Control Parts
- Clip-on Handlebars
- Scales from the eyes. It became very easy.... (HURRICANE: Aluminum Clip On Handlebar)
【HURRICANE】Aluminum Clip On Handlebar Review
Scales from the eyes. It became very easy.
GSX-R750 (2013) The driving posture of the SS is comparatively easier with the Handlebar position in front but still SS, so the hanging angle of the Handlebar is too tight for long driving, the neck and wrist from the late afternoon in the touring I purchased this item for improvement because it became extremely painful.
In the running after installation, the driving posture became extremely easy to surprise, surprisingly the pain of the neck and wrist could also be resolved, and it was a very satisfying result. I think that I am very surprised at what the painful attitude it was until now. Also, it will be easier than ever to return in the past. Those who are troubled by Position, the price is high (Value worth to be issued) However, I think whether it was better to exchange.
Although it is wearing, first of all Stem Nut (36mm) I need to purchase quite a high Socket.
As desorption order, remove StemHolder above → Remove Handlebar → Quantity : Pair (for Left and Right) Remove Grip of → Quantity : Pair (for Left and Right) Remove Switch → Remove Clutch holder → Remove Brake holder in order.
Installation is done in the reverse order of the above. Although it is the last Stem NutNut, if it is not the proper tightening torque, the Stem bearing will be affected, so 90 N in Torque wrench - It is recommended to install with proper value for m.
In terms of time, we implemented it while solving the following precautions, so I think that installation is possible in around 3 hours.
GSX-R750 (2013) There are two points to be aware of when attaching to (Adverse effects for diversion of GSX - R1000 exclusive use products).
1) When this product is installed, as it is, the angle of the Handlebar installation part of this product with the StemHolder hits, so the aperture of the Handlebar gets tighter (From NORMAL's Handlebar width) , The cutting angle of Handlebar will be small. To eliminate it, you can eliminate the tightening of the aperture of the Handlebar by cutting this product by 2 to 3? (We have secured Normal handle width by this). Although it is a shaving action, since this product is Aluminum, it can be easily shaved with the File for Gold genus, so purchase at Home center in advance (About 600 yen) We recommend that you wear it.
2) After installation, the Handlebar position will be up about 20 mm, so there is no play of Brake hose and it will be full of eyes, so I think that it is necessary to exchange Brake hose. Since we were thinking of exchanging from Brake hose of Normal to Mesh hose, we exchanged immediately.
Sisik dari mata. Ini menjadi sangat mudah.
GSX-R750 (2013) Postur berkendara SS relatif lebih mudah dengan posisi Handlebar di depan tapi tetap SS, sehingga sudut gantung Handlebar terlalu kencang untuk long driving, neck dan wrist dari sore hari di touring Saya membeli item ini untuk perbaikan karena menjadi sangat menyakitkan.
Dalam menjalankan setelah instalasi, postur mengemudi menjadi sangat mudah mengejutkan, mengejutkan rasa sakit di leher dan pergelangan tangan juga bisa diatasi, dan itu adalah hasil yang sangat memuaskan. Saya pikir saya sangat terkejut dengan sikap menyakitkan itu sampai sekarang. Juga, akan lebih mudah dari sebelumnya untuk kembali ke masa lalu. Mereka yang bermasalah dengan Posisi, harganya tinggi (Nilai layak untuk dikeluarkan) Namun, saya pikir apakah lebih baik untuk ditukar.
Meskipun aus, pertama-tama Stem Nut (36mm) saya perlu membeli Socket yang cukup tinggi.
Sebagai urutan desorpsi, lepaskan StemHolder di atas → Lepas Handlebar → Quantity : Pair (untuk Kiri dan Kanan) Lepas Grip of → Quantity : Pair (untuk Kiri dan Kanan) Lepas Switch → Lepas Clutch holder → Lepas Brake holder secara berurutan.
Instalasi dilakukan dalam urutan terbalik di atas. Meskipun ini adalah Stem NutNut terakhir, jika torsi pengencangannya tidak tepat, bantalan Stem akan terpengaruh, jadi 90 N pada kunci torsi - Disarankan untuk memasang dengan nilai yang tepat untuk m.
Dalam hal waktu, kami menerapkannya sambil menyelesaikan tindakan pencegahan berikut, jadi saya pikir pemasangan mungkin dalam waktu sekitar 3 jam.
GSX-R750 (2013) Ada dua hal yang harus diperhatikan saat memasang (Efek buruk untuk pengalihan produk penggunaan eksklusif GSX - R1000).
1) Saat produk ini dipasang, sudut bagian pemasangan Handlebar produk ini dengan StemHolder menyentuh, sehingga aperture Handlebar menjadi lebih rapat (Dari lebar Handlebar NORMAL), Sudut pemotongan Handlebar akan menjadi kecil . Untuk menghilangkannya, Anda bisa menghilangkan pengencangan aperture Handlebar dengan memotong produk ini sebanyak 2 hingga 3? (Kami telah mengamankan lebar pegangan Normal dengan ini). Meskipun ini adalah tindakan mencukur, karena produk ini adalah Aluminium, produk ini dapat dengan mudah dicukur dengan genus File for Gold, jadi belilah di Home center terlebih dahulu (Sekitar 600 yen) Kami menyarankan Anda untuk memakainya.
2) Setelah pemasangan, posisi Handlebar akan naik sekitar 20 mm, jadi selang Rem tidak ada yang berputar dan akan penuh mata, jadi menurut saya selang Rem perlu diganti. Karena kami berpikir untuk menukar dari selang Rem Normal ke selang Mesh, kami segera bertukar.