- Home
- Product reviews
- Motorcycle Parts
- Engine Parts
- Intake Parts
- Carburetors
- KSR110 The carburetor was exchanged for VM26 fro... (KITACO: Big Carburetor Kit MIKUNI VMΦ26)
【KITACO】Big Carburetor Kit MIKUNI VMΦ26 Review
KSR110 The carburetor was exchanged for VM26 from an authentic positive one. However, since the throttle was exchanged for the thing of KLX, not the thing for KSR but the object for KLX was purchased. A contents difference is a size difference bet
KSR110 The carburetor was exchanged for VM26 from an authentic positive one.
However, since the throttle was exchanged for the thing of KLX, not the thing for KSR but the object for KLX was purchased.
A contents difference is a size difference between a throttle wire and May Jet.
Since the main jet did not understand what suits unless it arranged it, KLX was used for the time being.
Throughout after exchange, it became sharp, rotational frequency also came to turn around 10,000 rotations comfortably, and torque up and that it can blow going up were again born to the different thing.
Although the attachment itself is taken although attached simply, and it is also in an opinion, since a suction amount becomes insufficient, processing of the air cleaner BOX is needed at the time of normal air cleaner BOX attachment.
I think that power up can be easily done since it is comparatively easy if it is setting of until to some extent.
While the head of the hexagon-socket-head screw of inlet manifold fixation hits an inlet manifold main part and strains itself among two uniquely regrettable one for a while only one, unless it fastens, in order not to enter, it not being a not much pleasant thing and this are individual specificity, but.
If it is original which I first regard as the body since it was crushed by the direction in which the place which carried out SJ exchange, and the screw thread of SJ were crushed and to fasten, are a place which should be connected to a manufacturer, but.
Although considered without using SJ from the first, since one year has already passed from purchase and processing to a carburetor heater and the main part for temperature sensor attachment was also performed, stripes were carried out as it is this time.
Since SJ binds tight by minus and it is easy to crush it, I consider that it is better to check first.
One * reduced by that.
KSR110 Karburator ditukar dengan VM26 dari yang positif otentik. Namun, karena throttle ditukar dengan barang KLX, bukan barang KSR tapi barang KLX dibeli. Perbedaan isi adalah perbedaan ukuran taruhan
KSR110 Karburator ditukar dengan VM26 dari yang positif otentik.
Namun, karena throttle ditukar dengan barang KLX, bukan barang KSR tapi barang KLX dibeli.
Perbedaan isi adalah perbedaan ukuran antara kawat throttle dan May Jet.
Karena jet utama tidak mengerti apa yang cocok kecuali diatur, KLX digunakan untuk saat ini.
Sepanjang setelah pertukaran, itu menjadi tajam, frekuensi rotasi juga datang untuk memutar 10.000 putaran dengan nyaman, dan torsi naik dan itu bisa meledak naik lagi lahir dari hal yang berbeda.
Walaupun attachment itu sendiri diambil walaupun hanya dipasang sederhana, dan juga menurut pendapat, karena jumlah suction menjadi tidak mencukupi, maka diperlukan pengolahan BOX air cleaner pada saat pemasangan BOX air cleaner biasa.
Saya pikir power up dapat dengan mudah dilakukan karena relatif mudah jika diatur sampai batas tertentu.
Sementara kepala sekrup kepala-soket segi enam dari fiksasi manifold saluran masuk menyentuh bagian utama manifold saluran masuk dan meregangkan dirinya di antara dua yang secara unik disesalkan untuk sementara hanya satu, kecuali jika diikat, agar tidak masuk, itu tidak menjadi banyak hal yang menyenangkan dan ini adalah kekhususan individu, tapi.
Jika itu asli yang pertama saya anggap sebagai tubuh karena dihancurkan oleh arah di mana tempat pertukaran SJ, dan ulir sekrup SJ dihancurkan dan untuk diikat, adalah tempat yang harus dihubungkan ke pabrikan. , tetapi.
Meski dianggap tanpa menggunakan SJ dari dulu, karena sudah satu tahun berlalu dari pembelian dan pengolahan hingga pemanas karburator dan bagian utama untuk pemasangan sensor suhu juga dilakukan, garis-garis dilakukan seperti saat ini.
Karena SJ mengikat erat dengan minus dan mudah dihancurkan, saya menganggap lebih baik untuk memeriksanya terlebih dahulu.
Satu * dikurangi dengan itu.