- Home
- Product reviews
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Wheel Parts
- Axle Shaft
- so-so... (RADICAL: Chromoly Axle Shaft)
【RADICAL】Chromoly Axle Shaft Review
so-so
I wanted to try ChromolyShaft because of its reputation and bought it with half a doubt. Unfortunately, I don't feel any lighter when I handle it. After installing the ChromolyShaft, I drove around the neighborhood and I can feel that the front is firm and the snap is firm. Certainly, there is a sense of firmness in the brake as well. It may be necessary to set the Fork as it also picks up the road surface condition. I think straight line stability has improved. The installation will require a 30Socket or Glasses Wrench as the Bolt will be installed through the OEM hex hole. The Fork was leveled before installation. Straight line stability is improved because of the leveling. As a side note, the service manual for the ZX12R states to jack-up the Oil FilterBase when raising the Front, but it is very unstable. Use a solid tool. Also, I have installed Babyface's Slider on the front, but since the shaft is now a bolt type, the Slider sticks out strangely to the right. It is not a problem in terms of functionality, but it is somehow not cool. Also, the surface treatment of the shaft is weak, and it peels off just by attaching it with a socket, which is unfortunate. The instruction manual is not very good. The instruction manual is not good, it's too muddy to read.
begitu-begitu
Saya ingin mencoba ChromolyShaft karena reputasinya dan membelinya dengan setengah ragu. Sayangnya, saya tidak merasa lebih ringan saat menanganinya. Setelah memasang ChromolyShaft, saya berkendara di sekitar lingkungan dan saya dapat merasakan bahwa bagian depan kokoh dan jepretannya kokoh. Pastinya, ada rasa kekencangan di rem juga. Mungkin perlu mengatur Fork karena juga mengambil kondisi permukaan jalan. Saya pikir stabilitas garis lurus telah meningkat. Instalasi akan membutuhkan 30Socket atau Kacamata Wrench karena Baut akan dipasang melalui lubang hex OEM. Garpu diratakan sebelum pemasangan. Stabilitas garis lurus ditingkatkan karena leveling. Sebagai catatan tambahan, manual servis untuk ZX12R menyatakan untuk mendongkrak Oil FilterBase saat menaikkan Front, tetapi sangat tidak stabil. Gunakan alat yang kokoh. Juga, saya telah memasang Babyface's Slider di bagian depan, tetapi karena porosnya sekarang adalah tipe baut, Anehnya Slider menonjol ke kanan. Ini bukan masalah dalam hal fungsionalitas, tapi entah kenapa tidak keren. Selain itu, perawatan permukaan porosnya lemah, dan terkelupas hanya dengan memasangnya dengan soket, yang sangat disayangkan. Manual instruksi tidak terlalu bagus. Manual instruksinya tidak bagus, terlalu becek untuk dibaca.
Show origin