- Home
- Product reviews
- Motorcycle Parts
- Engine Parts
- Engine
- Breather Covers / Breather Caps
- One-touch detachable is convenient... (KN Planning: [UmaRacing]Oil Breather Attachment A)
【KN Planning】[UmaRacing]Oil Breather Attachment A Review
Fits: HONDA FORZA, YAMAHA Cygnus X, YAMAHA Tricity155, HONDA Rebel300, HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA CB300R, HONDA CB150R, YAMAHA MAJESTYS, YAMAHA BirdCITY125125, YAMAHA AxisZ, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA XV125SVIRAGO, YAMAHA XT225YSP, YAMAHA XT225WE,
One-touch detachable is convenient
It is standard practice to attach a Breather Hose 650mm 6mm Diameter to relieve pressure in the Crankcase,
It is common for the Hose and Breather cap to be directly connected.
The heat from the engine may harden the hose and cause the hose to come off the cap.
When replacing the oil, you can remove it with a push switch, which is convenient for the Large change.
However, the Push Switch will not come off if you press it too hard!
Press all the way down and back up a little to release it.
Sealing of the detachable part is not a problem.
Dapat dilepas dengan satu sentuhan nyaman
Merupakan praktik standar untuk memasang Selang Nafas 650mm Diameter 6mm untuk mengurangi tekanan di Bak Mesin,
Biasanya tutup Selang dan Nafas dihubungkan langsung.
Panas dari mesin dapat mengeraskan selang dan menyebabkan selang terlepas dari tutupnya.
Saat mengganti oli, Anda dapat melepasnya dengan sakelar tekan, yang nyaman untuk penggantian besar.
Namun, Saklar Tekan tidak akan lepas jika Anda menekannya terlalu keras!
Tekan sepenuhnya ke bawah dan mundur sedikit untuk melepaskannya.
Menyegel bagian yang dapat dilepas tidak menjadi masalah.