- Home
- Product reviews
- Tools
- Brake Lever Lock
- Brake Lever Lock
- As a simple lock... (DAYTONA: Front Brake Vise Lock)
【DAYTONA】Front Brake Vise Lock Review
As a simple lock
Side Stand and 1 Type STAND are used to hold the front wheel in place when lifting the rear wheel.
I used to tie the Grip and Brake lever with string or Tie Wrap to keep the FBrake in effect.
There are some U-shaped products, but if they are dislodged by some accident during work, the hydraulic pressure will be released and the motorcycle will fall over. We chose a type of product that is sandwiched between the top and bottom.
The name of the manufacturer is engraved on the body of the product, and there is a non-slip surface on the part where the finger rests. When opening, the shaft is made of gold and opens smoothly. When closing, the top and bottom parts rub against each other nicely. It is made of hard plastic and solid. It does not wobble and moves well.
I have a Raflo short lever on my RALLY 50.
I was able to lock the CUB90 with a wire type Drum brake without any problem.
It was easy and fast to lock when I used it in the field. No Garbage from cutting string or Tie Wrap. Very convenient.
Prolonged use will put a strain on the brake components, and if the piston seal inside the caliper is deformed, the pad will not return to its original position. It is best to use it as a simple lock.
I tried to hang it on an old barrel-shaped grips I had on hand. I was able to hang it by pushing it in, but it left marks on the grips. It is better not to hang it on the thickest center section.
The Package clearly shows the size in full size Large under the actual item, but it would be easier to see if it were drawn on the reverse side if possible.
Sebagai kunci sederhana
Side Stand dan 1 Type STAND digunakan untuk menahan roda depan pada tempatnya saat mengangkat roda belakang.
Saya biasa mengikat tuas Grip dan Brake dengan tali atau Tie Wrap agar FBrake tetap bekerja.
Ada beberapa produk yang berbentuk U, namun jika copot karena suatu kecelakaan saat bekerja, tekanan hidrolik akan terlepas dan sepeda motor akan terjatuh. Kami memilih jenis produk yang diapit antara bagian atas dan bawah.
Nama pabrikan terukir di badan produk, dan terdapat permukaan anti selip di bagian tempat jari bertumpu. Saat dibuka, batangnya terbuat dari emas dan terbuka mulus. Saat menutup, bagian atas dan bawah saling bergesekan dengan baik. Terbuat dari plastik keras dan padat. Itu tidak goyah dan bergerak dengan baik.
Saya memiliki tuas pendek Raflo di RALLY 50 saya.
Saya dapat mengunci CUB90 dengan rem Drum tipe kawat tanpa masalah.
Mudah dan cepat untuk menguncinya saat saya menggunakannya di lapangan. Tidak Ada Sampah dari pemotongan tali atau Tie Wrap. Sangat mudah.
Penggunaan dalam waktu lama akan memberikan tekanan pada komponen rem, dan jika seal piston di dalam kaliper berubah bentuk, bantalan tidak akan kembali ke posisi semula. Yang terbaik adalah menggunakannya sebagai kunci sederhana.
Saya mencoba menggantungnya pada pegangan berbentuk tong tua yang saya miliki. Saya bisa menggantungnya dengan mendorongnya ke dalam, tetapi meninggalkan bekas di genggamannya. Sebaiknya jangan digantung di bagian tengah yang paling tebal.
Paket dengan jelas menunjukkan ukuran dalam ukuran penuh Besar di bawah barang sebenarnya, tetapi akan lebih mudah untuk melihatnya jika digambar di sisi sebaliknya jika memungkinkan.