- Home
- Product reviews
- Motorcycle Parts
- Electrical
- Regulator / Rectifier
- Replacement from 3xvOEM Product... (H.Craft: YAMAHA 3-phase Alternating Current Regulator/Rectifier)
【H.Craft】YAMAHA 3-phase Alternating Current Regulator/Rectifier Review
Fits: YAMAHA FZR400, YAMAHA ZEAL, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA FZR250, YAMAHA TT225, YAMAHA TT225, YAMAHA TW200, YAMAHA TT-R250, YAMAHA TDM850, YAMAHA SRX600, YAMAHA FZR400, YAMAHA SRX400, YAMAHA TDR250, YAMAHA 350R, YAMAHA DRAGSTAR250, YAMAHA XTZ750 SUPERTENERE, YAMAHA SEROW225, YAMAHA XJ600, YAMAHA VIRAGO250(XV250),
Replacement from 3xvOEM Product
While replacing the Ignition coil in 3xv,
I decided to replace the OEM Regulator before it breaks.
Originally, it was easy to stall due to Plug being covered during Idling,
I suspected the ignition system.
Regulator is located behind Rear shock,
I needed a long Hexagonal Wrench for the replacement,
I also removed Seat Cowl,
The fuel tank and air cleaner could be removed and replaced from the top without difficulty.
The product is Blacks than I expected and I installed the terminals on the side without the paint film.
I also sanded and polished the terminals just in case.
It is a little thicker than OEM and Large size, so the original Bolt was not long enough,
A slightly longer Bolt was used to secure it.
There was no Instruction Manual available
My impression is that it was exchanged at the same time as Coil,
Anyway, Idling became stable at 1000~1300 rpm,
I am glad to know that I am not having to worry about CDI or Battery failure.
However, the lack of Torque and jitteriness at startup was not improved!
(It's a 2nd 250, so maybe this is what it's like)
The price is less than half of OEM Product and the quality is better,
I thought it was a pretty good deal.
Penggantian dari Produk 3xvOEM
Saat mengganti koil pengapian di 3xv,
Saya memutuskan untuk mengganti Regulator OEM sebelum rusak.
Awalnya, mudah terhenti karena Steker tertutup selama Idling,
Saya mencurigai sistem pengapiannya.
Regulator terletak dibelakang Shock belakang,
Saya membutuhkan Kunci Heksagonal panjang sebagai penggantinya,
Saya juga melepas Seat Cowl,
Tangki bahan bakar dan pembersih udara dapat dilepas dan diganti dari atas tanpa kesulitan.
Produknya berwarna Hitam daripada yang saya harapkan dan saya memasang terminal di samping tanpa lapisan cat.
Saya juga mengampelas dan memoles terminalnya untuk berjaga-jaga.
Ini sedikit lebih tebal dari OEM dan ukuran Besar, jadi Baut asli tidak cukup panjang,
Baut yang sedikit lebih panjang digunakan untuk mengamankannya.
Tidak ada Instruksi Manual yang tersedia
Kesan saya adalah bahwa itu ditukar pada waktu yang sama dengan Coil,
Bagaimanapun, Idling menjadi stabil pada 1000~1300 rpm,
Saya senang mengetahui bahwa saya tidak perlu khawatir tentang kegagalan CDI atau Baterai.
Namun, kurangnya Torsi dan kegugupan saat startup tidak membaik!
(Ini 250 ke-2, jadi mungkin seperti ini)
Harganya kurang dari setengah Produk OEM dan kualitasnya lebih baik,
Saya pikir itu adalah kesepakatan yang cukup bagus.