- Home
- Product reviews
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Wheel Parts
- Spoke Nipple
- It will be clean.... (Dachi: Spoke & Nipple Set HF)
【Dachi】Spoke & Nipple Set HF Review
It will be clean.
As is the fate of spoke wheels, no matter how hard you try to take care of them, over the years, rust will become noticeable on the wheel rim and hub, especially on the spoke.
The Spoke can be polished to some extent by Bonnstar or PIKAL, or if the Tire and Tube can be removed and the Bearing is to be replaced, the entire Wheel can be soaked in rust remover. However, in the end, the best way to clean the Spoke is to replace it with a new one.
There are no quality problems and it is very clean.
but the Rim group was very Large strange because it was the first time to work on it.
If you just want to assemble it, you can refer to the pictures you took before disassembling it.
Since there is no run-out machine, it is temporarily assembled on the jack-up car body, and several Tie Wraps are attached to the car body, and the upper and lower Quantities:Pair (for Left and Right) It's a steady process of tightening the screws.
To be honest, I didn't want to do it again, so much so that I thought I would ask a contractor to do it next time.
However, it was worth the effort, and when it is done, it is very beautiful. It is a new product, so of course I am very satisfied with the finished product.
Since the price is also there, it is a Recommendation for those who are familiar with Spoke groups and want to try Challenge, but otherwise, it is better to request Large Human Shops.
The work is Large strange, but the product itself is very satisfactory.
The model used is an xlr80, but since the front is customized and crm80 wheels are used on the xlr80, the hubs and rims are also crm ones.
Ini akan menjadi bersih.
Seperti nasib velg jari-jari, sekeras apa pun Anda berusaha merawatnya, seiring berjalannya waktu, karat akan terlihat jelas pada pelek dan hub roda, terutama pada jeruji.
Jari-jarinya dapat dipoles sampai batas tertentu dengan Bonnstar atau PIKAL, atau jika Ban dan Tabung dapat dilepas dan Bantalan harus diganti, seluruh Roda dapat direndam dalam penghilang karat. Namun pada akhirnya, cara terbaik untuk membersihkan Spoke adalah dengan menggantinya dengan yang baru.
Tidak ada masalah kualitas dan sangat bersih.
tapi grup Rim sangat aneh karena baru pertama kali mengerjakannya.
Jika Anda baru ingin merakitnya, Anda bisa mengacu pada gambar yang Anda ambil sebelum membongkarnya.
Karena tidak ada mesin run-out, maka untuk sementara dirakit pada badan mobil jack-up, dan beberapa Tie Wraps ditempelkan pada badan mobil, dan Jumlah atas dan bawah: Sepasang (untuk Kiri dan Kanan) Prosesnya mantap untuk mengencangkan sekrup.
Sejujurnya, saya tidak ingin melakukannya lagi, sehingga saya berpikir saya akan meminta kontraktor untuk melakukannya lain kali.
Namun, usahanya sepadan, dan bila selesai, hasilnya sangat indah. Ini produk baru, jadi tentunya saya sangat puas dengan produk jadinya.
Karena harganya juga ada, Rekomendasi bagi yang familiar dengan grup Spoke dan ingin mencoba Challenge, tapi sebaliknya lebih baik request Large Human Shop.
Pengerjaannya aneh, tapi produknya sendiri sangat memuaskan.
Model yang digunakan adalah xlr80, tetapi karena bagian depan disesuaikan dan roda crm80 digunakan pada xlr80, maka hub dan peleknya juga crm.