- Home
- Product reviews
- Motorcycle Parts
- Brakes
- Brake Hose / Clutch Cable
- Left Side also... (GOODRIDGE: buildaline Universal Brake Hose for On-Road Model)
【GOODRIDGE】buildaline Universal Brake Hose for On-Road Model Review
Left Side also
Purchased this one along with a Front caliper replacement for a New Model GSX1300R HAYABUSA.
Quantity:Pair (for Left and Right) Quantity:I purchased 2pcs and here is the Left Side imprint.
The OEM was not long enough and the angle of the VERSIONBolt was different, so it had to be replaced.
However, it is not just a Hose replacement that can be used.
Caliper needs to be replaced→Hose needs to be replaced→Flare block adapter also needs to be replaced
A series of "↑" gold-dropping flows are required lol.
The old GSX1300R HAYABUSA does not have ABS, so as long as the hose from the master cylinder is replaced, it can be used as is,
For the New Model, the handling of the FrontHose has changed.
Apart from the hose from the Master Cylinder, there is a Gold hose from the ABS modulator and a Quantity hose from the ABS modulator.:2pc divided.
Therefore, first of all Flare bu Lock adapter. must be purchased.
・ Flare bu Lock adapter. https://www.webike.net/sd/24651726/Part No. FM10AN3T
Next, does the length vary by Caliper? I think they're probably the same, so here's a reference.
・Quantity:Length without 2pc Hose and Versionbolt:335mm*Quantity:2pc
But Hose alone is definitely not enough, so I purchased several Adapters below together in my case.
・https://www.webike.net/sd/1540510/ [Brake Fitting Adapter]. M10→AN3/8*2 for Caliper
45 degree Adapter
Well, there is not much information on the New Model GSX1300R HAYABUSA, so you will never know unless you try it yourself, but if you fail, your Gold will be wasted, so I will tell you everything I know and hope you will find it useful.
Next, I was a bit attracted to this product itself, especially since it has a Yellow color Tag?
Accuracy is not bad, but Quantity:I bought 2pcs, and one of them was leaking Fluid from the joint when pressure was applied, even if I tightened it from the beginning. But when I tightened it firmly one more time, it stopped leaking. I think it was because I didn't tighten it all the way to the back from the beginning after all. It has nothing to do with the quality of the product!
Sisi Kiri juga
Membeli yang ini bersama dengan pengganti kaliper depan untuk Model Baru GSX1300R HAYABUSA.
Jumlah: Sepasang (untuk Kiri dan Kanan) Jumlah: Saya membeli 2 pcs dan ini adalah cetakan Sisi Kiri.
OEMnya kurang panjang dan sudut VERSIONBoltnya berbeda, sehingga harus diganti.
Namun, bukan hanya pengganti Selang saja yang bisa digunakan.
Kaliper perlu diganti→Selang perlu diganti→Adaptor blok suar juga perlu diganti
Serangkaian aliran "↑" yang menjatuhkan emas diperlukan haha.
HAYABUSA GSX1300R lama belum ada ABS, jadi asal selang dari master silinder diganti bisa dipakai apa adanya,
Untuk Model Baru, handling FrontHose mengalami perubahan.
Selain selang dari Master Cylinder, terdapat selang Gold dari modulator ABS dan selang Quantity dari modulator ABS.:2pc dibagi.
Oleh karena itu, pertama-tama adaptor Flare bu Lock. harus dibeli.
・ Adaptor kunci suar bu. https://www.webike.net/sd/24651726/Nomor Bagian FM10AN3T
Selanjutnya, apakah panjangnya bervariasi menurut Kaliper? Saya pikir keduanya mungkin sama, jadi inilah referensinya.
・Jumlah: Panjang tanpa 2 buah Selang dan Baut Versi: 335mm*Jumlah: 2 buah
Namun Selang saja jelas tidak cukup, jadi saya membeli beberapa Adaptor di bawah ini secara bersamaan untuk casing saya.
・https://www.webike.net/sd/1540510/ [Adaptor Pemasangan Rem]. M10→AN3/8*2 untuk Kaliper
Adaptor 45 derajat
Nah informasi mengenai New Model GSX1300R HAYABUSA belum banyak, jadi anda tidak akan pernah tahu kecuali anda mencobanya sendiri, namun jika anda gagal maka Emas anda akan terbuang percuma, jadi saya akan menceritakan semua yang saya tahu dan berharap anda akan menemukannya. berguna.
Selanjutnya saya agak tertarik dengan produk ini, apalagi ada Tag warnanya Kuning?
Akurasinya lumayan, tapi Kuantitas: Saya membeli 2 buah, dan salah satunya bocor Cairan dari sambungan saat diberi tekanan, meskipun saya mengencangkannya dari awal. Namun ketika saya mengencangkannya sekali lagi, kebocorannya berhenti. Saya pikir itu karena saya tidak mengencangkannya sampai ke belakang sejak awal. Ini tidak ada hubungannya dengan kualitas produk!