Installed on a KTM890Duke-R

The product is presented as being for a KTM 790 Duke, but I was able to install it on an 890 Duke R with no problems. There are about 15 bolts that need to be removed, and two bolts need to be replaced with the supplied ones in order to sandwich the supplied spacers (long and short) for product installation. In the process of removing the ground cable holder mounting bolt, adding the short spacer, and replacing the bolt, the original locktite was in the way, making it difficult to twist the bolt in, so we used a tap to prepare the female threads. Also, the short spacer had to be installed between the vehicle side parts, so dexterity was required.

Dipasang pada KTM890Duke-R

Produk ini disajikan untuk KTM 790 Duke, tetapi saya dapat menginstalnya pada 890 Duke R tanpa masalah. Ada sekitar 15 baut yang perlu dilepas, dan dua baut perlu diganti dengan yang disertakan untuk mengapit spacer yang disertakan (panjang dan pendek) untuk pemasangan produk. Pada proses melepas baut pemasangan penahan kabel ground, menambah spacer pendek, dan mengganti baut, locktite asli menghalangi sehingga sulit untuk memutar baut, jadi kami menggunakan keran untuk menyiapkan ulir betina. Selain itu, spacer pendek harus dipasang di antara bagian samping kendaraan, sehingga diperlukan ketangkasan.