Reviews
Perfect for PinionSeat and CarRear box installation at the same time!
I bought this for PinionSeat and CarRear box at the same time.
I was able to use the Universal Bracket from the GIVI box.
View detail
Size of Clamp is Small.
The size of the clamp does not fit the 1 inch Handlebar, so I had to buy it separately. View detail
I think we're finally getting there.
I ransacked the Screen of various manufacturers, but
It took us a long time to find the right price and shape.
However, I used to think that Screen was more like a small swing.
As time went on, that idea changed.
The absolute prerequisite is that it is not too assertive and does not interfere with the atmosphere of SR.
Next was the price.
I don't know the effect because I haven't done the distance or speed that I can feel.
It looks nice.
It is just fit for SR, but you can adjust the opening of Bracket.
I can't tighten the Screw as hard as I want to, so I'm worried about Nut not falling off.
I think I'll go with the Nylon Lock Nut...
As mentioned in the installation instructions, you have to be careful with the optical axis.
Adjusting with the angle meter on your phone is out of the question.
As a quick way to do it, fix a stick vertically to the Light case which removed the Light, and put it in the case.
Longer is more accurate, but harder to see.
Always use the Center Stand to straighten the Handlebar and avoid moving it as much as possible.
Mark the position of the top and bottom of the bar on the background when viewed from the side.
After installing the Screen, just adjust the angle of the Case to where you marked.
View detail
It's a pimp!
When I replaced the Handlebar, the vibration was more than before. Since I have a Taper Handlebar, I couldn't use my old Handlebar, so I was looking for something better and found this product. I just installed it and haven't run it yet, so I don't know if it will reduce the vibration, but I will report back later. View detail
World Walk G2 Protection Tank Pad 2018 CB1000R
Very good quality product. Very well made. It has excellent grip. Very easy to install. It covers the right places. Gives grip in the right places. No modifications need. View detail
Nice, pretty but does not go perfectly on the vmax
in transparent beautiful piece. a little wide for the 1200 vmax you have to force and therefore bend the plexiglass a little Very sensitive to scratches clean well with a clean soft cloth. -------------------------------------------------- -------- in transparent beautiful piece. a little wide for the 1200 vmax you have to force it and therefore bend the plexiglass a little Very sensitive to scratches clean well with a clean soft cloth. Powered by Google Translator View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
Good Size
Nice size and easy to put on! View detail
Installed with the expectation of windproof effect
I installed it hoping for a windproof effect. The Neck is easy to get Wound on Handlebar. It is very easy to install. (When running) It is a Large difference because it can prevent the cold wind received in the neck area of the View detail
The wind seems to have eased up a bit.
When I drive lightly on the mountain pass road, I feel that the headwind is eased a little. If you ride at high speed for a long time, you can expect the effect. Personally, I'm disappointed with the look of the Motorcycle, so I may remove it after I've had some fun with it.
It is very easy to install, if you have a DUCATI Sport1000, you can install it without any adjustment, because the clearance of Meter and Nut is very close.
View detail
It'll protect you well.
Only 2 weeks after installation, I slipped and fell in the sand, Lever, Pedal and Engine Guard were bent and had to be replaced, but thanks to this Exhaust System was unharmed. The tip of the resin was shaved diagonally, so it seems to have taken a stand and protected me. I became a fan of Mr. WorldWalk who developed the product. I will buy the other Guard as soon as they come out because I usually get knocked down a lot. Next time, please make it around Handlebar.
The fitment is written as CB1100EX, but it was attached to CB1100RS without any problem.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300, HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300
Motorcycle windshield
I was riding a Rebel 500. In order to make my motorcycle more beautiful, I chose this windshield, but I was disappointed. I might as well buy a pig hood! This goggles is not good-looking or practical! ---------------------------------------------- I rode a 500 rebels, for their own motorcycle more beautiful, I chose this windshield, the results are disappointing, might as well buy a pig mask! The goggles look good, not practical! Powered by Google Translator View detail
I'm satisfied with Design and Large!
DesignMotorcycle's Grom is the standard for Custom!
This Meter visor takes Design to the next level ^ ^.
I think the tightening of the dowel is Key for installation.
I don't think you can get the effect of Wind Screen in street driving, but I'm very happy with the design ^ ^.
View detail
Fits: その他 , DUCATI Scrambler icon, DUCATI 1299 Panigale, BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH street scrambler, SUZUKI Bam Bam 200, SUZUKI Bandit 1250, SUZUKI Vstrom 1000, SUZUKI Vstrom 250, SUZUKI Glass Tracker Big Boy, SUZUKI V-Strom 650
So cute fuel tank stickers
After searching on webike for a long time, I found that there is such a cute fuel tank sticker. Because the freight is too expensive, I have not been willing to place an order. I finally couldn’t help but buy it. After I got it, I liked it very much. The soft texture is very comfortable. The two eyes of the cat are very cute. This one is rarely seen outside, and it is full of special mailbox stickers. Hahaha---------------------------------------------- Found on webike for a long time, only to find that there is a cute tank stickers, shipping is too expensive because the orders have not been willing, finally could not resist orders to buy, very much like the hand, soft texture is very comfortable, cats two very cute cat's eyes, this can rarely be seen on the outside, full of special mailbox stickers. Ha ha ha Powered by Google Translator View detail
I am satisfied
It's beautifully made.
The water drainage hole in the hollow of the mounting part shows how careful it is.
Maybe it's because it's lower in height, but it's a little more comfortable because the wind that used to hit me right in the chin with the OEM is gone!
View detail
TouringItems
I bought it for its wind protection effect when driving on the highway.
High accuracy and smooth installation.
It is convenient for touring because it is designed to mount a smartphone.
The key is that the wind protection is only so good It's like.
I'm very happy with it myself.
View detail
It is a solid product.
I was looking for a Box of size not too large for TouringSEROW.
As for the thing of an overseas famous brand, when it is installation using the Base installation hole position of Adventure Carrier, I saw many comments that removal of Seat is difficult, but I examined the installation position with the Base here, and used the Plate of only the front attachment like the photograph.
I was able to position it easily.
The supplied bolt is still too long, so I replaced it with an M6×25 bolt and fastened it. 20mm would have been large and strong.
Bolt and Tools (Hexagonal Wrench and Combination are OK) I think that the work can be completed in about 15 minutes if you are ready.
The box is very rigid and does not feel cheap at all, the lid can be opened by one push and it is easy to use.
I am very happy with this product and it is so solid for the price.
View detail
Effective even on small screens.
I bought this for my moped motorcycle. The installation is relatively easy with the instruction manual. If you make fine adjustments before the final tightening, the upper and lower Quantity:Pair (for Left and Right) It is a good product with windproof effect though it is small. View detail
Machining is required for the Gixxer 250.
I bought it because it was Jixxer 250, but I could not use it as it was because the shape of Pad was for SF, and I cut and used it matching the shape. Because I only stick it, work is easy. Even if it rains or washes a car, it does not come off.
The thicker street pad keeps my inner thighs cooler.
View detail
Fits: その他 , DUCATI Scrambler icon, DUCATI 1299 Panigale, BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH street scrambler, SUZUKI Bam Bam 200, SUZUKI Bandit 1250, SUZUKI Vstrom 1000, SUZUKI Vstrom 250, SUZUKI Glass Tracker Big Boy, SUZUKI V-Strom 650
cute little
I like these products. I feel like I've been looking for it for a long time.
I think it would be nice to see more of them, not just cat-shaped ones. It's cute and the direction of the eyes gives it a bit of personality and a playful feel.
It's a good thing that you can change the direction of your eyes to your liking while giving it a cat shape and personality, but it seems to accumulate Dust and Garbage, and you'll be sad if you lose it because your eyes come off.
View detail
No complaints with Exclusive Design
I am not satisfied with the shape of this product.
I'm concerned that only the cut-out portion of the Logo mark seems to accumulate dirt.
View detail