Reviews
There are many kinds.
I purchased GM-MOTO's Swing Arm to attach to my CUB90.
Since this is my first time with a Manufacturer, I thought it would be better to use the same Manufacturer for the parts I use.
When I inspected the received items, there were no problems with the overall length and inside diameter.
The 25mm O.D. of the material is very similar in appearance and does not look unnatural. The installation was done beautifully.
The CUB90 is stored mainly in Garage, ridden two days a week for 15 minutes?2, and not ridden on rainy days. In the 16 months since installation, the collars have been removed from the swing arms more than 20 times for chain and sprocket changes, adjustments, etc.
Compared to the OEM steel color, the material is aluminum, so there is more wear and tear than the OEM. The surface treatment has become duller than when new.
The Wheel Collar is difficult to polish due to its location. It is better to use a protective rust remover frequently to prevent rust from occurring.
This was my first time working with a Manufacturer, and I was a bit apprehensive. However, it is very helpful that they provide parts that are specially designed for each customer's installation. I think the uniformity of the parts material is also good.
View detail
Amazing Monkey Seat
Quality is outstanding on this seat, much higher than I expected. The seat was extremely easy to install and only took a few minutes. I'm very happy with the fit and feel of the product. The seat was package very well and has a great protector for the seat while installing it. The seat also comes with a very cool sticker in the box. Thank you Webike for another great purchase and fast delivery. View detail
Quality feels top notch
Great little addition to help finish off the head set of the gorilla or monkey you are working on, looks great and helps complete the look View detail
Fits: HONDA MONKEY
DAYTONA's Copy product?
DAYTONA's Copy product?
The quick quality is not bad, but it is Solidly and hardly Stroke due to Lowdown.
The screw thread on the spring that holds the spring to the top bridge has been licked, but DAYTONA's hydraulic inner fork repair item can be used. (The size of the spring winding is a little different, so some modification or hard work is required.)
Brembo caliper support for DAYTONA Inner Fork can be used without modification.
View detail
Eleven guns in Horizontal TypeEngine is rare!
[How is it used?
When combining a CD90 series Engine with a CD50etc. rear sprocket, we needed a lower sprocket than the 12T, which is why we decided to purchase it.
Was the one you received as per Image?
It was more solidly made than Image.
Was the installation difficult?
Simply replace with NORMAL Sprocket.
Normal bolt cannot be used to secure it, so use the supplied cap bolt and bracket.
How was your experience with it?
It is not simply a calculation that one front gun is equivalent to three back guns, but a subtle GEAR ratio allows for various combinations, which is good to expand the range of setting.
[Included Parts:were they on?
In addition to the Sprocket, a Bracket and Cap bolt are also included.
[Was there anything that disappointed you?
Nothing yet, but it seems to be vulnerable to Rust.
The Rear Sprocket has the smallest number of points (11), including other companies' products, so the possibility of the Chain interfering with the Swing Arm is high, so we do not recommend the use of the Rear Sprocket.
View detail
Not worth talking about. It's too thin.
For OEMShaft O.D. 11.93~.
Kochira is 11.85mm to 11.87mm in diameter.
It rattles. Somehow, it has turned into a TaperShaft!
Left11.85 Middle11.87Right11.90mm What is this?
Also, Mt. Screw's effective length is too long.
Some Swing Arm you are using has a thin shaft.
It goes wild and leaves a Screw Mountain scar.
Why did I buy this one, lol?
View detail
No Recommendation on buying if you want to pimp
I bought it for MONKEY because I had used it for APE and didn't have such a bad impression of it.
It doesn't look bad,
When it comes time to install it, it is a rickety gubba-gubba.
First, the Pivot part. This is the most important part.
It comes with four Pivot Collars.
All four are RoseRose in length.
And the Pivot Collar is not long enough.
Shim adjustment is made to the width, though,
Even if you don't want the width to rattle.
The Pivot Collar is not long enough and the Swing Arm does not move when tightened.
This can only be solved by rebuilding the Pivot Collar itself.
Then, the Shaft is passed through the Pivot Collar,
It is rattling.
Since the shaft is OEM, the inner diameter of the Pivot Collar seems to be Large.
So even if you could adjust and tighten it well at this point
Even with the Shaft in, the Swing Arm is still Oversized, so the Swing Arm will be out of control.
(One-off color is the solution for us)
Next, WheelAxle Shaft.
While the outer diameter of M12Shaft is approximately 11.92~mm
Rear axle bore diameter is 12mm or more.
This one is also rattling… This one is… already!
I thought Chain Adjuster would be nice too,
There is no reference line on the Shaft side, so you have to mark it to know….
These two points. [Color] I need to Clear.
Dangerous while driving.
I really wanted to return it, but I opened the package ….
I mean, it's not like this is a non-returnable issue if you don't know how to put it on.
I understand a certain amount of QUALITY.
This one was kind of the worst….
Oh, and for the Drum.
The Brake Rod also requires modification.
It has to be angled a little to hit the suspension bracket.
It's something for people/experts who already have … lathes and such.
WeBig sometimes has a Sale.
I regret that I should have worked a little harder and bought GCraft's Swing Arm.
If anything, Tanaka Shokai's Swing Arm is better.
Is anyone using this as is 、、、、?
View detail
High quality
Seen this engine sub frame on another monkey z50j and thought it looked awesome. I decided to take a chance on it with my z50j with a 190cc engine to see if it would fit.fitment is perfect and helps reduce vibration from the engine. The finish and build quality is very good.i recommend this product View detail
Price suitable
Design and texture are good for the price. View detail
Fits: Others
The font is cute.
Installed on a MONKEY. The product description said that some modification may be necessary, but it came on normally.
There were a few Small scratches, so if you are nervous, this may not be for you.
View detail
Recommendation
I have a Takegawa on my MainMotorcycle ….
There is no Large difference w
I guess the Brand name Gold amount difference!
View detail
Not bad!
The performance will be reduced, but … I recommend it so much for the look! View detail
Fits: HONDA MONKEY
It looks better now
Brake needed a little work.
The rest came on with no problem.
Looks much better from Rear.
The wheel is as beautiful as if it had been plated.
View detail
Sleek design
These look great on the 5L monkey and the white paint is shiny.right side mounting brackets we're easy to install. Really makes the bike stand out. View detail
Quality welds
This swingarm looks great on my monkey. Has roller pivot bearings unlike the oem swingarm are bushings. It also compliments the rear suspension for a smoother ride. Although this is designed for the 5.5j wheel you can also go down to a 3.5j wheel with the correct axle shaft spacers. View detail
Nice quality
I used this gm moto brake stopper on my 5L monkey with the 5.5j wide swingarm with a 3.5j rim and 130/60-10 tire and fitment was perfect View detail
Perfect
For the price these are good light weight axle spacers.worked great for my 5.5j kepspeed swingarm.highly recommend these. View detail
To GORILLAdisc!
Purchased to make GORILLAdisc.
Better than I thought!
Bearing replaced with a domestic one!
View detail
Not bad!
Not bad construction!
Does it look good?
I'm worried about it cracking.
View detail
Recommended
Less vibration!
Custom feeling is improved, vibration is reduced, and long distance is easy!
Half the price of a Manufacturer!
I don't know what it looks like.
View detail