ITType." What does that mean, Italy?

I wanted to change to a Tail lamp with an integrated License Plate Light. I could have chosen anything, but since the car I was installing it on is an old ItalianRacer, I looked for a design that would not ruin the atmosphere and decided on this one.
I think KIJIMA is the best because the valve is sold separately, but it is a product of a well-known manufacturer, inexpensive, and easily available, and KIJIMA also supplies small repair parts such as lenses and rubber base parts. KIJIMA and Tail lamps are strong for classic vehicles.

Personally, I am disappointed only in the Fixing Screw, which is too small, and the Nut and Washer are too small to work with, and the originally drilled holes are too large in diameter. If you are going to drill a hole in a cowl, I don't think M3 or M5 will make any difference.
The base of the Rubber has a fairly solid thickness, and these points are very favorable.

Although there are only three wings, a WiringMemo is included, and it is also designed with the beginner in mind. View detail

Good visibility

It is easy to see and use even during the day. It is also good that USB can be used for power supply. View detail

Used to secure Tool Bag

If you use it with a Carrier, you need to be creative when installing it because it interferes with the Carrier's legs. View detail

No installation or operation problems

[How is it used?
SEA BASSRGV250Γ (VJ22A) I bought it because it was compatible as a Clutch lever for
To be frank, I was fine with any brand as long as it was black to match the Brake lever, so I chose KIJIMA's, which was the least expensive among them.

Was the one you received as per Image?
I thought it would be a little more matte from the picture, but the product I received was a rather shiny Black.
It's not that much to worry about, so it's okay.

Was the installation difficult?
Simply remove the Bolt from the Clutch holder, remove the Clutch Wire and Grease up and put it back.
It took only a few minutes and the replacement was completed easily.

How was your experience with it?
It is a very ordinary clutch lever, neither good nor bad.
There is no adjusteretc., so adjustment is not possible, but I think that is unavoidable since the price is low for that reason.
The rattling with the Holder is minimal, allowing for worry-free operation.
It would be a good idea to always have a spare in case of a fall.

[Included Parts:were they on?
LeverBody only.

[Was there anything that disappointed you?
It was not so much a disappointment, but the glossiness was a bit of a concern.

【Review】
We had no problems installing it with the inexpensive Clutch lever.
In addition to Black, Silver is also available as a lineup, so you can choose whichever you like. View detail

The best choice for waterproof bag storage

It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator View detail

Affordable and easy to use

[How is it used?
Wiring was needed for Circuit Running.

Was the installation difficult?
Copper Washer is included, so there is no need to buy it separately for the first time.
Of course, without the WiringPlate, wiring is not possible, so please purchase and install it separately.
6R is Oil Pan Bolt with Plate bite.
I was reluctant to remove the oil pan bolt, but so far there has been no oil seepage, so I can use it without any problem.

How was your experience with it?
Designability is not particular, but I have no problem with the functionality.
Affordable and easy to use.

[Included Parts:were they on?
Copper Washer and Wire included.
It is a one-time fee and must be purchased the next time it is used.

Point and hang of installation
Wiring should be done by applying tension in the direction that the bolt is tightened. Sometimes we see wiring that is not only meaningless but also dangerous. View detail

Cheaper than OEM

This will be no problem, unless you need OEM! You can spend the difference on Oil. View detail

Easier.

The GSX1300R HAYABUSA Throttle was as heavy as rumored. I thought it would be a little heavy and large enough to be durable, but my hands are getting tight, especially when riding around town while also holding the brake. The price is cheap and I think it is a good product. I also bought Throttle's Spring to replace it by myself, but I'm using this one in due time. View detail

tw200

The appearance has been improved by the Large change,
The instruction manual was easy to understand and I had no trouble installing it. View detail

KIJIMAFrontReachSeat

I used to ride with a GelCushion, but it used to be a hassle with gapping, etc. The Cushion is no longer necessary, and the seating has become more comfortable.
Regarding the installation, there is too much play in the claws that insert into the body, so some modification is necessary, such as covering the claws with rubber material. I would like you to improve this part. View detail

a perfect fit for a bike

very precise and sparkly It's easy to wear It would be nice if the prescribed torque value for the fastening bolt was written. The combination with "overracing subframe" is good My bike has become a little more shiny. View detail

Required for OH above the waist

Used for Valve matching. This is a task that is rarely done, so I am thankful for this Size. (Even this Size will probably never run out.) View detail

Less expensive than OEM

It is less expensive than OEM. Performance is probably comparable to OEM. View detail

Insistence is strong

The bar is quite high and has a strong presence.
The color and texture are nice. View detail

I have no particular problem using it.

It is a consumable item that is used for a short period of time, so it is very helpful to be able to purchase it at a reasonable price. I have no problem using it. View detail

Good

If you read the manual, it is easy to install and fits well. It weighs more than you think. The cooling fins have a nice shape. View detail

Repair of external Exhaust System.

The Band of Earls Gear's Slip-on Silencer that I bought used is not usable because the Screw does not turn in RustRust.
I checked and it was the same as this product.

The band itself is stainless steel, and the screws are iron, so Copa Coat is applied to the screw threads to prevent biting and rust.

It can be tightened normally and looks normal. No exhaust leaks, probably because it is evenly tightened.
I thought it was a good, safe product. View detail

GOOD GOOD Glass Wool Acoustafil

Cutting is accurate and no cutetc. is required.
The Glass fibers are braided and compressed thinly, so there is virtually no scuffing of the Glass fibers.
(but protective equipment is still required)
The compressed Seat is temporarily fixed with Tape and expands with heat after assembly.
The work of putting it in the tube is easy.

The purchase cost is usually a problem instead of the difficulty of the work being reduced compared to Glass Wool.
Silencer parts removal & disassembly, Rivet removal by Drill,
Rivet re-fixing, hole alignment, and removal of remaining gasketetc. using special tools,
Parts matching checks and other su-kills are necessary.

One 1100mm-long Seat is equivalent to one Silencer.
Two Silencers would require two pairs. View detail

Easy to use

It is a common Horizontal Type carrying can.
It combines all of the above:ease of use, ease of carrying, and ease of handling.
It is 10L, so the volume is not large, but that makes it light and easy to handle.
Recommended for those who do not have a carrying can or are purchasing a carrying can for the first time. View detail

It can also be used on the lower road!

I bought it on impulse, thinking that it would be good if I could use it mainly on downhill roads. Surprisingly, my right hand became very comfortable. I have heard some people say that they can't use it because it slides too much, since the grip varies depending on the large size and texture. In my case, it was just right. So, if you feel it is going down, you can easily put it back up. It almost never comes down, though. This is a great buy! I wish I had tried it sooner! View detail