For FROM 200!

I installed this on a Van Van 200, and it looks like I added it to the OEM mudguards, I was going to install it where the holes are on the License Plate, but it was too short and ugly, so I drilled out the mudguard holes and installed it much lower. I was told by others that it looks tacky, but please don't laugh at me, as it is my own personal world.
I also chose the mudguards for the front side. vanvan200Front Fender is too wide, so it was just right for the rear side. I changed the shape of the front and rear mudguards. It is full of nostalgic feeling. View detail

For Burgman 400

Pros: Efficient Filtration: The Kijima oil filter effectively filters contaminants, ensuring optimal engine performance. Durable Construction: The build quality of the filter is commendable, demonstrating resilience against pressure and temperature variations. Easy Installation: Installing the Kijima oil filter is hassle-free, making it convenient for DIY enthusiasts. Reasonable Price: Considering its performance and longevity, the filter provides excellent value for money. Cons: Limited Availability: Depending on your location, finding Kijima oil filters might be challenging compared to more widely available brands. Lack of Advanced Features: Some competitors offer additional features, such as anti-drainback valves or textured grips, which must be included in the Kijima filter. View detail

Easily attachable

During the restoration process, the grips were covered with mold and were so dirty that wiping them off with a military hand did not help, so I replaced them.

Moreover, the CUB-specific Quantity:Pair (for Left and Right) I cut it out and measured the thickness, because it seems to be the same thickness. It is written that the thickness may differ depending on the year and grade.

My vehicle is Quantity:Pair (for Left and Right) They were the same thickness. Thus, the choices were narrowed down.

The accuracy was slightly smaller than the Single Item measurement, so I blew on Brakes cleaner, pushed it in, and finished.

We have used this product in the past, and it is a trusted manufacturer, so we are comfortable with it. Grips are consumables, so we replace them when they wear out. View detail

I can't connect to the dedicated Site at all, so no.

If you don't improve Site, it will be useless. View detail

Slim impression

I purchased these to install on my 2014 S1000RR.
The second model has been replaced by a narrow LED blinker, which is also attractive in its own right, but we wanted to make the most of the SS design, so we decided on this less conspicuous product.
The installation itself is completed only with Torque and +Screw.
Instruction is also clear and Quantity:Pair (for Left and Right) There is also an indication so you will not make a mistake.
However, since it is LED, high flasher will occur. I don't mind it that much, but those who care about it may be bothered.
Well, when you are on it, you can't see it because it is a very Compact Blinker.
Note that the Crimp on the Connector and wire may be a little weak and may come loose. Be careful when attaching and detaching. View detail

Installed on GSX1100S KATANA

I bought it because of its simple shape and size. There is no drain outlet, but this is not a problem because it needs to be removed to discharge. View detail

Ease of use unique to Exclusive Design

[How is it used?
RC42 has a Helmet holder if you don't remove the Seat.
It was inconvenient when I was on the road because I could not use it. I was looking for a product that was easy to use, and I found this product and purchased it with high expectations for its exclusive design.

Was the one you received as per Image?
Almost as per the Image.

Was the installation difficult?
Installation was very easy!
The only tools used are +Driver and 5mm and 6mm Hexagonal Wrench.

How was your experience with it?
Balance varies slightly depending on the type of helmet.
It is a Level that is not a problem.

[Included Parts:were they on?
The key is Quantity:Includes 2pcs. Includes a helpful Instruction Manual.

[Was there anything that disappointed you?
None in particular. View detail

Cool

This is a part that allows you to tie luggage or bags to the rear without significantly compromising the appearance of the SV650. The installation method is simple, and it is sturdy because it connects to the car. In particular, it seems to be a necessity for those preparing for camping with SV650. It can be used as a handle when pulling, and the commonly used rear bag, which is mounted under the seat, can be simply tied to this frame, making it convenient in many ways. -------------------------------------------------- -------- It is a part that allows you to tie your luggage or bags on the rear without hurt the SV650's appearance. The installation method is also simple, and it is strong because it is connected by the vehicle. Especially for those who are preparing for camping with the SV650, it will be a necessity. It can also be used as a handle when it is chicked, and the rearback that is mounted under a lot of sheets is also tied to this frame. Powered by Google Translator View detail

It was as expected.

I thought it would be OK to buy Chinese products from Amazon, but I decided to go with JapanManufacturer because it is more reliable.
The amount of Back and Up is set in a Large tight location, but the Position is now a good fit.
I think SF should be this much Position in OEM. View detail

KIJIMA Handlebar Mount Bracke

I can use a small space efficienctly. I modified the Rixen Kaul adapter, combined it, and put on some kind of bicycle handle bag. View detail

Very convenient

Installed in my wife's car 。 He chose Bobber for its style, but he doesn't want to give up Camping touring and Shopping Touring.

I had it installed at the shop when I took delivery of my new Motorcycle because I didn't want to damage it! 。 The Black color blends in nicely with the body, but the Pipes of various thicknesses cross each other and do not look good without the Bag! 。 If you don't usually hang bags, you may be concerned about the clutter. 。 Once the Bag is installed, it is lean and unobtrusive in size.

The lower bolt is the reverse side of the exhaust system, so if I had installed the parts myself, I would have put a wound on the exhaust system.

As you can see, attaching the bag is easy, and the bag does not gap back and forth because of the belt loops. 。 I don't think I'd be bothered without the Loop on the bottom side. 。 For reference, the red side bag installed is 37 cm wide and 22 cm high from lid to bottom. View detail

Solid easily adjustable but sprockets smaller than I required

This tool is multi-purpose; You can use it to remove the variator, flywheel, front sprocket and clutch. This was purchased to enable me to remove the front sprocket for bike. Although it did work, it was rather fiddly to use and the assistance of an additional pair of hands to held was needed. Product solid and quality.The tool itself is looks as though it will last long time. View detail

Usable normally with no problems.

Element is exchanged every two times when changing Oil
I have used various manufacturers' products to get points or to get them at a discount, but this KIJIMA product is just as good as the others and works just fine. View detail

It works for Powerful utilization!

Powerful, if replaced with Power Filter, Quantity:Set is the Breather filter that I bought this time.
What is a Breather filter?
This filter is a mechanism to release the air inside the engine that expands due to heat and the engine oil that evaporates slightly, so as not to release this vaporized oil into the large volume of air or contaminate the motorcycle. 。
In NORMAL, the air cleaner box has this role as well. 。
If you don't care about environmental issues, you can replace the Breather Hose with a longer one and extend it behind the Frame 。 There is also a Breather box that cools the vaporized oil and returns it to a liquid state. 。 Why do we need Breather…… because it is loaded with Engine.
Gasoline is burned in the engine, but at that time, it cannot be completely combusted and unburned gas is generated.
This unburned gas enters the crankcase between the piston and cylinder. The Breather is responsible for returning the blowby gas to the Air Filter.
So, it seems like it would be a good idea to release the blowby gas (after successfully separating it from the oil) into the atmosphere, but ……blowby gas contains carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxide (NOX). Therefore, if they are released as they are, they will have a negative impact on people and the earth. As a side note, the law currently prohibits engines from emitting large volumes of blowby gas.


Merit to put on Breather filter?
(1) Blowby gas contains unburned gas generated inside the engine and impurities such as Carbonetc. in the oil. 。 The Blowby gasFilter separates gas and oil, returns the oil to the oil pan, and removes impurities to prevent contamination from entering the intake tract.

(2) Prevents Garbage, etc. from entering Crankcase.

(3) The performance effect is that the pressure generated inside the crank is released to the outside, and by reducing the rotational resistance of the crank, the engine revs up smoother and the response improves, and the body handling by the Axel is improved.


There is no Demerit.


good point
◎Engine braking is eased and jitteriness during deceleration is alleviated.

◎Response of deceleration→re-acceleration is faster.

◎The fact that you don't have to worry about what others see around you.

A bad point
◎Because it absorbs Gas, it gets dirty quickly and needs to be cleaned frequently.

◎Because of the structure, there is a smell of Gas around the car body compared to when using the NORMALAir Filter because it is external.


If possible, it is recommended that the breather filter be fixed near the carburetor inlet for the treatment of blowby gas.


Unlike the NormalAir Filter, the Blowby reduction is eliminated and the air intake efficiency in the air cleaner box is improved, so there is some demerit work, but I think the effect can be felt.

If you set the filter to "Powerful", be sure to add a "Breather filter" as well! View detail

MONKEY Side cover

The installation position is Exactly, high quality, and I am satisfied with it. View detail

The XG250 TRICKER has a slightly smaller take-up diameter than the OEM.

Purchased for installation of hand guard to be fixed to Bar End.
I installed it on my XG250 TRICKER and the take-up diameter is a little smaller than OEM.
I felt no discomfort when I rode it.
It was easy to open end for now, so that was helpful. View detail

Used to supply Gasoline as a startup check

Installed between the connection from a simple Gasoline container to Carburetor to prevent CarburetorOverflow.
Effective without CarburetorOverflow after adding Filter. View detail

Cost and Performance

Power Filter, the standard Tune for intake and exhaust, Powerful.
The Power Filter makes the air flow smoother and provides air without stress to the throttle work, making the engine more responsive and increasing torque and power.
Throttle response when opening the axel has also been improved, and you will be surprised at the difference in the comfortable start.

Setting the carburetor and injector is essential for installation. After the carburetor and injector are installed, the power of the carburetor and injector can be experienced, but there are also Merit and Demerit.


Merit to be replaced by Power Filter
[Merit1] Power up The shorter the intake pipe is and the rougher the filter is, the more air resistance can be reduced by replacing it with an air cleaner. 。 Most OEM filters that use filter paper, etc., have low airflow per area and large intake resistance, whereas the mesh Power Filter has much lower intake resistance. 。 When the intake resistance is reduced, the negative pressure resistance when the piston is lowered during the engine intake process is also reduced, so both power and response can be increased. 。 The higher the RPM, the more air intake per hour, the larger the benefit will be, and as long as the fuel condition is well controlled, the power can be increased by replacing the power filter. 。

[Merit2 Sound change The Merit of replacing with the Power Filter is that the intake sound becomes easier to hear. 。 Normal air cleaner box is designed to reduce intake noise, so intake noise is barely audible 。 The bare power filter directly emits the sound of the engine intake, and this alone creates a sporty atmosphere. 。

[Merit3 Space-saving By eliminating the air cleaner box, which occupies a large volume of space in the motorcycle, the available space can be effectively utilized. In addition, it contributes to weight reduction. 。 Mopeds with less loading Space can increase their loading capacity, albeit slightly, by installing an Accessory Case! 。

It seems to be a Power Filter full of good things, but there is also this Demerit.


Power Filter Demerit

[Demerit1] When replacing the noisy Power Filter, not only the intake sound but also the blasting sound of the Engine and even the Mechanical Noise can be heard.
The air cleaner also serves as a silencer, and replacing it with a power filter will significantly reduce the silencing performance of the intake system, etc., so when the RPM is increased, the noise may be greater than the exhaust noise. 。 I like it (laughs).

[Demerit2] Low-speed Torque becomes thinner and harder to ride. 。 The Power Filter and direct carburetor certainly increase power by reducing intake resistance, but precisely this is only the result of the TorqueBand shifting to a higher RPM side. Therefore, the starting acceleration may seem weak, or the TorqueBand may lack the feeling of Torque when the Throttle is slightly opened, and the motorcycle may become difficult to handle.

[Demerit3] If the Power Filter has a nipple to install the blowby hose, there is no problem if the hose can be inserted there. However, it is illegal to release the blowby gas discharged from the engine to the large airflow because there is no installation point for a blowby hose. 。 Blowby gas is sucked out by the negative pressure of the intake air and is discharged because the replacement of the Power Filter or opening of the large air intake does not provide enough negative pressure as the OEMAir cleaner box does, and blowby gas cannot be sucked out as efficiently, The increase in the internal pressure of the engine crankcase prevents the piston from moving, resulting in power loss. 。 While replacing with a power filter will increase power by reducing intake resistance, it may also cause power loss by reducing blowby gas discharge efficiency.




Based on Merit and Demerit, I purchased KIJIMA's Power Filter this time, and it is not bad relatively speaking. In a word... it runs well (with Carburetor setting).

good point
◎Filter capacity, well treated joints, and durable performance.

◎Cheaper than K&N.

After Fire will not appear.


A bad point
◎ Cannot be used on rainy days. →Because it absorbs water.

◎Intake noise became annoying.

◎Carburetor setting is required.

◎Engine characteristics become closer to high rpm. →If I say that it has come to revolve, it does (laughs).

◎Cleaning will be necessary for the blisters.


Some people do not have the Merit to install the Power Filter from Demerit, but it depends on how you use it and the form you want to use it in.
The purpose is to set the intake and exhaust to match the current running conditions. 。 In such cases, we think the Power Filter is a logical part. View detail

I don't want to hurt OEMHarness.

I want to use CouplerON as much as possible, because cutting OEM harnesses is a source of trouble.
Considering the price and construction, this is a very expensive product, but the advantage is that it does not damage the OEM's harness.

Installation is easy. In the case of the Ninja ZX-25R, remove the DummyCoupler and insert this product into the DummyCoupler.
The original DummyCoupler is simply attached to the Coupler on the other side of this product.
After installation, an energization test was also conducted.
Checked with Tester and no problem. View detail

Installed on VIRAGO250

The size fits the intake of my VIRAGO 250 just right. The price is low and the quality is not bad, so I use it for other vehicles as well. View detail