Perfect size and capacity for DIY

Has been very useful for collecting used oil from engine oil replacement. Small enough in size for placing under the bike and also carrying around in a bag to transport it to dispose it at a proper recycling place. View detail

Introduction of tools at hand

When I suddenly needed a tool, I was too lazy to go to MotorcycleGarage, which is a long way from my living room, to get it.
However, I was not interested in buying a cheap No Brand tool from a home center, so I searched for a tool from WeBigShopping, and found a reasonably priced, high-functioning Quantity tool.:Set found.
I already have a regular SIGNET hand tool, which I feel comfortable using, and since it is in stock at the WeBig warehouse for immediate delivery, I bought it immediately.

I don't have any use for the large bolt and screw sizes for motorcycles and cars in my room, so the size of this product is sufficient for my needs.
I had overlooked this when I purchased it, but I noticed it when I received the tool set. The small head (see photo) of the Ratchet is a whopping 72T! It is also suitable for the gaps where a normal ratchet is too large to fit in. Of course, it is also suitable for small bolt and narrow space of Motorcycle.

There is a slight wobble when attaching a Screw, Hex or Torque Bit to a Hand grip or Ratchet, but this kind of Quantity:I think it is accurate enough as a Set. (When removing the bit holder from the ratchet, you can unlock it with the button on the back of the head, which is very authentic even though it is small.)

Finally, I'm glad I bought it! View detail

I like that it can be separated.

I bring it with me on camping tours. Unlike cars, motorcycles should be stored as small and compact as possible! This Scoop is foldable, but in reality, it is not. Separation. This is incredibly convenient! This is so convenient! It can be stored anywhere! It is not as good as a regular Scoop, but you can dig a hole to install a Peg with ease! The quality of the paint is good and does not peel easily! It's good to buy one of them! Large will be useful even in times of disaster! I recommend it! View detail

sesuai, unik dan fit. View detail

Ideal for camping touring!

First of all, let me conclude that this product is a Large winner! I use it mainly for camping touring and commuting. The carrying capacity is very high, and when folded up, it is an amazingly small size, about the size of a single comic book, so it can fit inside a pocket! And the durability is not bad, it can be used about 10 times! After use, just wash it with neutral detergent and let it dry! It is rain and mud resistant, so it won't stain your Riding shoes even if the Camping ground is muddy with rain! However, there are some weak points… First of all, as you can see in the picture, the soles are non-slip, but they are slippery anyway! Especially if there is a drainage ditch or if it is icy, it is very dangerous to slip around like wearing SkatingShoes! Once I slipped on the stairs at Umeda station and almost fell down…Also Size:If you have a large foot and try to put it on your shoe with too much force, it will tear in one shot because it is free. If you use it carefully, it is a very convenient product (especially useful at camping sites) and I highly recommend you to buy it! View detail

Quantity:Set

3 types Quantity:Since it is a Set, it looks good to be able to use it for Rust, Dirt, and Polish. I don't use it that often, but if I use it hard, the tip of the bristles will bend, but it's not a bad price. View detail

Need to be creative with storage

It is bulky to have a pick tool with various angles even though it is used only occasionally.
I bought this one because it takes up less space. It is reasonably priced, but the quality is good.
It is a replacement, but it is firm without rattling, and the checker ring on the shaft makes it easy to turn.
I wanted a device to reduce the number of turns by making the screw threads deeper and supporting the screw threads instead of shortening the screw length.
The Vinyl container is too bulky for the compact size, so I cut the MarbleChocolate container to the right length and use it. View detail

SIGNET 27mm deep socket

Used to remove Nut from FrontSprocket on ZX10R.
The length was just right, and I was able to Offset the Frame and other parts in a nice way, making it easy to apply force and safely loosen and tighten. View detail

Sometimes it is necessary.

When using the Torque wrench to tighten the bolt while managing the Torque, there are some places where the Head's Large Torque wrench cannot fit. In such cases, I used this Adapter when I could not tighten the bolt with the Torque wrench alone.
Most recently, I used the CRF250L around the LINK.

In Veteran maintenance, it may be possible to tighten the bolts somewhat with proper torque without using a torque wrench, but after various failures, I try to use a torque wrench for critical parts as much as possible.
The LINK area, for example, is just perfect because of the fear of Bolt dropout.
Although it is used infrequently, it is a safe tool to have.

We have 10mm and 12mm in different sizes. View detail

Thinner, lower ride height is fine.

I have been cutting oil cans to replace oil in vehicles with CUB's Down Type Exhaust System because the Exhaust System inevitably gets stuck, but I am grateful that it is lower than that and is 4l compatible. View detail

To use Torque wrench in tight spaces

When using the Torque wrench to tighten the bolt while managing the Torque, there are some places where the Head's Large Torque wrench cannot fit. In such cases, I used this Adapter when I could not tighten the bolt with the Torque wrench alone.
Most recently, I used the CRF250L around the LINK.

In Veteran maintenance, it may be possible to tighten the bolts somewhat with proper torque without using a torque wrench, but after various failures, I try to use a torque wrench for critical parts as much as possible.
The LINK area, for example, is just perfect because of the fear of Bolt dropout.
Although it is used infrequently, it is a safe tool to have. View detail

Just the right Size and airflow

I bought a compact one because my current one is a large size.
It is easy to carry with the expected Size feel.
When it is a little hot and the airflow is about the size of an Uchiwa, the breeze is more than sufficient.
I don't know how durable it will be when I start using it, but I believe it won't break that often.
If it is good enough, I would like to have it for my family. View detail

Convenient to have

TWrench is something useful when performing maintenance.
The handle is shaped for easy force application.
I think it is good to have one for those who do SelfMaintenance. View detail

Easy to use

I had the same one but had to repurchase because I lost it.
It is easy to have one TLunch. The handlebar is small, so it is easy to store and easy to turn.
You can't turn round and round with your finger, which is common, but …. View detail

It is a good value.

[How is it used?
It is used for wiping off water after washing Motorcycle and Car & for wiping up after WAXCoating.
Prior to that, I had been wiping away moisture with a used and tattered Toweletc., but it was not very absorbent and I was looking for an alternative.
For me, who finds the management of Chammy skins a hassle, this product is easy to care for and Large change is appreciated because it can be selected, dried and stored like Microfiber Cloth regular Towel.
Was the one you received as per Image?
The size of the cloth is not so big, but even the smallest dustcloth starts from 30cm×30cmSize, so it is a sufficient size for motorcycle.:The Set contained 15 sheets, which is about 68 yen per sheet, which is attractive enough from a price standpoint.
The product was very good value overall, with more sheets than I expected, and more than Image.
How was your experience with it?
The fabric is thicker than that made by a certain 100-shop, and in terms of size, it is easy to use because it is just right when folded into four pieces.
The thickness of the fabric is the same as the last time I bought from Webike. WAKO." It is thick enough and absorbs water well.
Various Manufacturers are still selling Microfiber Cloth, so I will try to buy a little bit of each company's CROSS at Webike when I get a chance.
[Points to note]
It is only a personal Point, Easy to clean after use." and the place has the experience of making Dustcloth of Chammy skin Mold I'm a pain in the ass." This is the most gratifying thing in the world for
[Notes]
To prevent the beautiful painted surface from getting wounds, etc. For Body blow-up. When For Engine and Undercarriage may be better to keep them separate.
CROSS that has been dropped on the ground during use may scratch the Body due to sand and dust, replace it with a new CROSS and continue working.
How did it compare to other products?
I think it has standard performance as Microfiber Cloth, even considering the unit price per piece. 3-pack." etc., which seems to be a better value than buying many times over.
Other items that would be helpful
[ITEMS TO BUY TOGETHER
You may save a little money when you purchase the appropriate Car Wash & Coating agent and other Chemical products for your car to the extent that shipping is free.
[Opinions and requests to Manufacturer
Thank you for your continued support of our bargain sales. View detail

Reliable quality

I bought it partly because most of the tools I use now are from SIGNET, but also because I have confidence in its stable quality.
The quality is not outstanding, but it is not too low either, and I think the quality and price range are just right for Sunday mechanic. View detail

Easy to use

Used for Snap ring of SUPER SHERPAFrontSprocket
The work I used to do with a slotted screwdriver or radipen is now done with
It was done in an instant, like a lie. The price is reasonable and the construction is solid.
I'm satisfied View detail

it costs OK

Actually, I did not have a Socket for electric Impact. Since I did not use it that often, I did not pay much attention to it, and when I needed it, I used to use my ZEAL for hand tools in the main office.
However, I thought it would be better to have a dedicated Socket for the following two main reasons, so I purchased it this time.

Since Koken's ZEAL is made with a very tight tolerance for the socket fit, the fit to the Snap on motorized Impact is Large.
Also, as is characteristic of ZEAL, the head of the male screw is made as compact and low as possible, so if the head portion of the male screw is too high, the engagement with the bolt will be too shallow.

My impression of the Brand is that SIGNET is not so bad, but there are some places where it is not really heavy-duty.
However, considering the frequency of use and the size of the electric Impact, I think it is acceptable.
I bought 3/8Size this time, should I also buy 1/2Size?
I use the Breaker bar almost exclusively in places where 1/2 Size is used, and I don't use the Impact bar. View detail

JUST！

I'm glad I got the size I wanted at a Reasonable price! The delivery time was fast! View detail

In the course of Plug exchange

I purchased this while I was in the process of replacing Plug.
Both socket and hexagonal are convenient for tightening/loosening. View detail