Reviews
Here’s some fitting instructions
I've been using throttle paddles from various manufacturers over the years & while typically effective in general- they tend to either be low cost & cheap looking/a bit flimsy~ or expensive and good quality plastic & strong, fairly rigid construction. This product is a curious one. It's price is very low & the plastic quality is excellent. The only real issue is that it uses a rubber strip instead of a rubber tube to fit between the handlebar grip & the paddle body to provide friction & prevent slippage. ~ this rubber strip is challenging to install as it needs to be initially fed inbetween the grip & the paddle..I recommend a pair of long nose pliers for this task. Once some of the rubber strip is partially fed in- turn the paddle & it will pull the rest in. Take your time setting up the paddle- start a little low & working it up in increments. If you rotate it too much the rubber strip will come out & you'll need to start the whole process again. On the bright side- once it's properly set up, it won't slip at all. View detail
Good for the price!
Satisfied with Large. However, 1 pc of the 6 screws included had no screw threads. I didn't use it for M8, so there was no damage, but I realized that the inspection level is different from made-in-Japan. It is a pity because the product itself is good. View detail
Looks just like the OEMMirror from VANVAN90!
I used it on a VANVAN90 Restore that I got from my friend's father.
The OEM Mirror screws are of course no longer in production, so I tried to find a good used one, but they are being sold at a ridiculous price. I don't want to buy from those malicious people anymore, so I was looking for something similar to the OEM and the shape, and I found it here.
Our VANVAN90 still has the Only RightOEMMirror, so we removed it and polished it like a demon with PIKAL, and used this for the missing Left Mirror.
The shape is exactly the same, so there is no sense of discrepancy. The only difference is that it does not have the SEA BASSOEM SMark engraved on it, so it is comparable to the OEM Mirror unless you get close and look closely.
Quantity:Pair (for Left and Right) So, RightMirror will be Stock in case the Original Mirror you are currently wearing decays.
We do not recommend it to those who are concerned about NumbersMatch, but we highly recommend it to VANVAN90 users because it has the same shape and can be purchased at a reasonable price.
View detail
I think it's a great cosmetic.
It is well made for a cheap price.
I turned up the protective cloth on the surface to look inside and found a solid and quite thick Wire with a solid key Image.
To be honest, I don't know if it will prevent theft.
I think it is good because just by putting it on, it makes people think that they are being protected.
View detail
difficult
The Large size is useful for touring use, but this kind of product ends up breaking due to lack of strength. What is strange is that this kind of product does not have Material:The lack of Carbon. Carbon, which absorbs vibration, is flexible and strong, and should be an excellent material. View detail
It is easy to use.
I used it to adjust the interior of X-lite's X-803 RS.
I had the fitting done at the FiveStar store, but after using it for about a year and getting used to wearing it, I purchased this item to make it tighter.
The feel is good, and the double-sided tape is rather strong and can be applied firmly. The tape is wide, so please cut it as needed.
This time, we increased the top and back of the head area, and also increased the cheek pad slightly.
I checked afterwards, and the fine tuning was successful and made it difficult to Gap even in the Circuit speed range.
X-lite costs about 9,000 yen for the Cheek pad alone, and it cannot be fine-tuned, so having a product like this is very helpful.
View detail
Unfortunately, I cannot paste it well.
It was difficult for me to paste it into Helmet.
The glue is sticky and does not come off cleanly.
Adjustments are also difficult.
Too bad.
View detail
Do-it-yourself HelmetFitting adjustment
I tried to adjust the fittings based on Niigata 2 Rinkan's April 9 blog, as I had renewed the interior.
I added Sponge because there is a gap in the front and back and top and bottom when I put it on.
The tape on the sponge is very strong, so it is better to check the fitting before attaching the sponge.
View detail
To Tandem with my 6 year old son
I bought this for a tandem with my 6 year old son, and I was disappointed that the design and texture was cheap, like a construction site vest, but it is practical enough. The design and texture is cheap and looks like a construction vest. I bought this product because I thought it would be better to have a simple support belt so that I would not have to worry about using it on a daily basis. The only drawbacks are that the driver's body belt is too high on the chest and the buckle is under the armpit, making it difficult to put on and take off. View detail
If you need 5mm thicker, you should buy a new Helmet …
I purchased both the 3mm/5mm thickness sold by the company As a result, I used the 3mm thickness, which is sufficient for One sizeOver adjustments, and the 5 i think that Cheek Pad part is too large if you need a thickness of 0.5mm View detail
You can't go wrong
I used it on my Jet helmet which I was unhappy with fitting I am very happy with the fit and there is no gapping after installation It's just one coin and it's my favorite helmet View detail
Speed Pit Sponge
Very good packaging and the sponge thickness is 3mm. Very easy to use just cut and stick. i adjust my helmet sponge using this product and it does fit my head exactly what i want after completed the adjustment. View detail
Stylish
I installed it on a Silver body! It's a unity
I like the Black Rail part of it, it's subtly Accent!
The Aluminum Grip is very high quality and this product is very easy to install and remove It was!
If it were a little cheaper, it would be great!
View detail
It looks nice.
It was a bit difficult to install, but I love the look and feel of unity and luxury!
The Grip width is also much thicker
The look is one of my favorite things I've tried out of all the things I've tried!
View detail
Grip feeling
The weaknesses of the Aluminum Grip are that it's slippery and gets cold in the winter!
I don't use it in the winter, so I'm not sure about the slipperiness
The unevenness of the rail section is Grip, which prevents it from sliding After that, I personally like the grip of the uneven part!
View detail
Helmet Adjustment Sponge
Item is in good condition when it arrived to me. The size is 5mm as per description in the website. Easy to use as it comes with self stick glue. Just measure and cut then stick to your helmet as additional sponge. Very useful when you want to do custom fitting to your helmet. View detail
Off Not suited for cars?
Since it runs about 200 times each time, I thought that it would be possible to reduce the burden on the wrist and I bought it. On road was able to feel sufficient effect. However, in the forest road I broke when I knocked down one turn ... It is a good item if I do not fall over (^_^;) View detail
Honda old car style
Honda is the old car style Mirror. I feel the shape almost as it is. Bracket part is looking for short Type and purchased.
Although it looked as expected, Mirror will be displaced immediately by vibration... What I bought for Right was Large, so it may be individual differences. However, the Mirror alignment part is a construction that seems to be vulnerable to vibration originally
View detail
To Jet helmet
I tried purchasing for the protection of eyes when wearing a small jet without shield, is pretty nice.
Of course it guards us that Garbage gets in your eyes while driving, as well as preventing glare from Asphalt in fine weather and reflections from the Indian and Body of the previous car.
Since the construction does not change with ordinary marketing Sunglasses, wind will be involved somewhat from the gap with the eyes when running, but in my case my eyes did not hurt or tears appeared.
I like Design with Outlaw feeling anything..
View detail
For X-JET.
I bought it for EASYRIDERS's X-JET Helmet. Although it is not Exactly, it can be attached to the Face guard Line in a somewhat conforming manner. I'd like to continue supplying it because the price is also cheap.
The item is protected with Vinyl, but it was a little disappointing that Small Scratches were attached when opening it.
View detail