Reviews
Helpful in preventing Prank
It looks better than the OEM resin cap and requires a hexagonal wrench to open and close, but there is no oil level gauge, so the OEM cap must be kept in stock. View detail
This is good.
The shape of the mirror is designed to avoid the arm holding the handlebar, so the visibility is surprisingly good, and the bracket is thin, so it may be good to be less assertive.
The Mounting Base is a little large, so I adjusted it with a washer so that there would be no wound left on the cowl when tightening it.
View detail
It is definitely better than OEM.
I just took it off and put it back on, and so far it hasn't come loose, but if you're worried about it, you need to get it back on.
It looks good, but the price is too high,
View detail
Worn Dry Clutch Components
Excellent set of products, sorted out Dry Clutch issue where Dry Clutch components had worn so much Clutch wouldn't disengage and spin freely. Now all working as it should. View detail
Great product
Good quality, conform to the origin Fit very well for 450 Suzuki rmx to install speed sensor with extrem ease. Send very fast View detail
Fits: SUZUKI SV650 N, SUZUKI DL 650 XT V-Strom, SUZUKI DL 650 V-Strom
The CP is also good.
From the name PyramidPlastic, I was prepared to order some more cheap products.
In fact, the FRPParts arrived with a high degree of precision, which is quite high for exterior Parts from overseas.
The bracket engages the Crankcase Bolt firmly, and the engagement with the FRP part is not bad.
However, the supplied Bolt is a bit short, so you may want to prepare a Bolt of about +5mm.
It is not impossible to stick to FRP, but it does not put a load on FRP, and above all, it increases work efficiency by a large margin.
In fact, a separately purchased DesignBolt was used for installation.
I have the impression that it took quite a long time, but it is because it is an overseas parts.
Considering that the FRP parts are solid and cost only 20,000 yen, the cost performance is also good.
View detail
Fits: HONDA CB1100F, HONDA CB900F, HONDA CB750F
Watch out for small parts.
First of all, when you take it out of the box, there is an E-shaped Snap ring in a small bag, so you might lose it if you open the bag carelessly. I found the Snap ring in the Instruction Manual, and found it lying at my feet.
Next, in the Instruction Manual, the footpeg is removed and the U-shaped plate is fixed with a bolt, but there is a small ball on the footpeg and a spring holding it down, so the ball will fly off with the spring if it is not removed carefully.
When putting the footpeg back in, there is a plate between the U-shaped footpeg and the footpeg, so the footpeg and the plate sandwich the spring and the ball between the footpeg and the ball and hold it down to some extent while inserting the footpeg.
View detail
I saw that it was out of print, so I suppressed it.
Manufacturer OEMOption Parts.
I bought it because it is out of print and I thought I would hold on to it.
Yeah, failure.
White on Gun meta as per image (over Paint or Seal) [Color] (Clear?) It was.
The one up in the product image looked Black.
In any case, Out for Mat silver bodywork.
It would have been better if it were black instead of the shiny gun meta.
Two bright, flashy colors that are not on the body of the car.
Parts that would look good on a Black SV from Gun meta.
I tried Silver as a trial, but the Fit feeling is not so good.
Paint was returned and sealed to the Stock shelf as a testFit only item.
View detail
A little relief on rainy days
I had only used the Net type, but after using it, I was impressed with the convenience of the Large type.
Loaded cargo is inconspicuous
No gaps to protrude
Large sturdy enough for a little bit of rain.
More compact than Net type when stored
I bought a Large size thinking that a Large would also be a Small!
Can wrap a full size helmet completely.
View detail
Universal and easy to use
Material:Stainless Steel 8mmCap bolts are available at Home center in various lengths (about 150 yen per pc).
Even if it is not a car-specific product, this one from Universal was sufficient for me.
Also, there is no extra Logo, etc., which is nice and clean.
View detail
Used for city driving
It is used for city driving.
Controllable and good feeling. It is less scary even on rainy days. The price is not too expensive and I like it.
I will report again on durability.
View detail
Pre-cut and inexpensive
I usually buy rubber mats and cut them, but this product is pre-cut and at this price, so there is no extra hassle.
Grip is also good.
View detail
OEM is #1 ??
Anyway, OEM is the best.
It is safe.
View detail
Repair Parts' pricing is bad.
Purchase at the same time as the vehicle with the Option of a new car
I ordered Repair Parts the other day because I had a scratch from a standing accident.
One Side with 15,000. That's expensive." I thought that Y's Gear products would be safe, so I bought it.
You pick up a box of parts at the store and open it at home.
Included was a Silver colored decorative Cover, flat Bracket, Bolt, and Color!
ProtectorBody was not included.
Huh?" I asked the store about it, but they said that the included parts were correct.
Please be careful.
This product looks good, but its Repair Parts are a rip-off, as if to undercut people who have had accidents.
The price is 15,000 and includes only Silver colored ornaments and Bracket.
Moreover, it is One Side.
It was a terrible experience that made me so angry that I felt I would never buy Y's Gear products again, so I will share it here.
Other than that, both OEM Engine Guard and Side Protector are attached.
In a standing strike, the Side Protector was grounded first and the Engine Guard was not scratched.
View detail
Repair Parts is too expensive.
Purchase at the same time as the vehicle with the Option of a new car
I ordered Repair Parts the other day because I had a scratch from a standing accident.
You pick up a box of parts at the store and open it at home.
ProtectorBody was not included.
I contacted the store and they said that the included parts were correct.
The price is 15,000 and includes only silver-colored ornaments, bracket, and bolt nut.
Moreover, it is One Side.
It was a terrible experience and I am sharing it here.
Other than that, both OEM Engine Guard and Side Protector are attached.
In a standing strike, the Side Protector was grounded first and the Engine Guard was not scratched.
View detail
Fits: KAWASAKI NinjaH2SX, KAWASAKI NinjaH2SX SE, KAWASAKI NinjaH2SX SE+
Not only the phone Mount.
I purchased these parts to reduce the vibration coming from the Handlebar as well as the phone mount. I used to feel numbness in my hand due to the vibration, especially when turning at high RPMs, but this seems to have been slightly reduced after installing these Parts.
Of course, it can also be used as a smartphone mount.
If only the screws securing the handlebar to the bridge can be removed, the rest is bolt-on, so it is not a very large work, but anyway, removing the original screws is large and strange,
View detail
Cheap, strong, rustproof
This is the same Parts that helped me when I was riding WR250.
By the way, I'm haGap from checking WeBig's compatibility, but CRF250L M RALLY50 MD44 will also fit, 44-47mm will fit, I will let you know.
I purchased this product in conjunction with the purchase of YOSHIMURAExhaust pipe.
As expected, the OEM exhaust clamp was rusty and rusty when removed.
Bolt broke.
I bought it on Amazon Prime, so I placed the order in the afternoon and it arrived first thing the next morning!
View detail
Good texture
I locked the Saddle Bag and tried to put the Wire through the Belt on the Back Support, but the loop of the Wire was too thick and did not go through. However, I have no complaints because a thin wire would make the security weaker. I just bought it, so I don't know how durable it is, so I give it 3 stars. View detail
Fits: HONDA CB750 Four(CB750K)
cb750FourExhaust SystemConnecting Pipe
Tightening Band and Quantity:The Set is sold by other Shops, but the price is quite high and it is hard to find it because only the tubing is enough, but it is sold by your company and it was a big help! View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Eliminator400
It is still first class!
It is still first class!
Cool!
Installation is a simple push-on with the included clip bolt. (*´?`*)
This time I installed it on my wife's ELIMINATOR 400, but now I think I'll change my Z9 to it too.
View detail