Reviews
Large I'm strange
The webike classification is Winter, but it is a 3SeasonMODEL with the same mesh as the other ZAKAs from Spring!
I bought it without trying it on because no store on the market carried it.
I'm a big guy, 180cm, 100kg, and XL is just right for me.
Unlike other Manufacturers, it looks very nice and not too clunky!
The back is NUCLEON KR-CELLi [New Clion KR-CELLi]
Chest is NUCLEON FLEX PRO Ci [New Clion FLEX PRO Ci] Protector.
Protector to be placed in the chest is too tight for L Size.
Especially recommended for those with a similar body type.
View detail
Fits: KAWASAKI NINJA 400, YAMAHA YZF-R7, DUCATI STREETFIGHTER V4, YAMAHA MT-03, Others
I am satisfied with the moderate Size.
The bag is easy to install, wraps around the RearSeat, is not too large, and does not get in the way when you are riding over a vehicle. The capacity is a little small, but it is enough to hold rain gear, a drink, and a cap. It is also convenient that there is a lock hole on the zipper so you can lock it with a wire locketc. The Strap makes it easy to carry after disembarking. The strap for attachment is too long, but if you put it under the Seat or between the Seat and the Bag, it is no problem. View detail
Easy and Engine-friendly Maintenance
The maintenance that can be done very easily by the user, such as periodic air filter replacement and oil replacement, will keep your car in good health for a long time. This filter is easy to use by simply removing 6 BoxScrews in the case of Address, and we highly recommend SelfMaintenance.
The price is low, so it is sufficient to replace new ones each time!
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125 G8, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125LIMITED
I don't have to forget to buy anything!
Quantity of O-rings at the Oil Filter, Drain Washer, Oil Filter, Oil Filter Cover, and Oil Inlet.:With this set and oil, you have everything you need except tools.
It is very convenient because I don't forget to buy parts.
View detail
Satisfaction with constant change in running Custom
I was surprised that LEDValve is now available at the same price as Halogen.
The replacement process for the subject vehicle is very easy and custom!
I am very satisfied with the look and the White light, very beautiful.
View detail
Satisfied with thickness and sturdiness
I have just started using it, and although it is heavy, it feels sturdy, the keys are quiet, it has a dustproof function, and the length is just right. View detail
Vibration improvement at high speed
I purchased the Black color and it blends in well with the Grip. Installation was easy. I have not applied Screw lock yet, but I will do so after purchasing it at a later date. I was worried about the other company's HeBeaverWeight, but I am glad I chose this one. I have been driving at high speeds for about 30 minutes and my palms are no longer numb from the vibration at 6000 RPM. I wish I had bought it earlier. View detail
Casually Parenthesis better.
You will be satisfied with the results you get.
Care must be taken with the Radiator Cap during installation.
Depending on the type and orientation, there may be interference. Push rivet was used to attach the front cowl. To avoid contact wear, a thin rubber plate was inserted as a cushioning material.
View detail
Fits: KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KL250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX250, KAWASAKI KX500, YAMAHA WR250Z, YAMAHA YZ250, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KDX200, KAWASAKI SUPER SHERPA, KAWASAKI KLX250R (for competition)
DRCFront sprocket
It was just the right size. This is also adjusted by Rear sprocket. View detail
Fits: KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI Z250 (2013-), KAWASAKI Z250SL, SUZUKI 250SB, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI D-TRACKER-X
DRCFront sprocket
It was just the right size. Now I will adjust it with Rear sprocket. View detail
alignment
I tried to install NPRO Ject's Twin muffler on my WR250X, but the Clutch Side interfered with the ZeroGee Tail cowl, so I chose this one to keep it off the outside.
It is better mentally than piling on the appropriate Washer or Bolt.
View detail
Length and Working Space
We needed to change the Bolt that holds the Exhaust System in place, so we went with this one.
I would have been happy with one, but it's not perishable, so I'll keep it in the Screw box in case I use it someday.
View detail
Formative Lantern CUB
Changed from high quality plug to Standard Plug BP5HA I can't see much change in the expensive product and it seems to be covered with black. View detail
’Type 74 MONKEY
Personally, I dislike Minimoto products. But this parts is very similar to the ones I had back then, no complaints! I will report any changes after that. View detail
Tiller and Lantern CUB
A memento lantern CUB, Mouse View detail
Genuine Kitaco Oil Pump Kit for CRF50F
This is something I have been meaning to try for a while on my boy's CFR50F as we did a big bore kit anyway. This oil kit was suggested by a close friend with a simialr bike and their opinion was excellent and basically sealed the deal. Finding the right kit was pretty straight forward by using the tools Webike provide and help section. The price was excellent and I could not even get a hold of one of these kits locally anwyay. With a few other parts in my order, I had them all shipped using EMS as my chosen courier. The kit was well packaged and wrapped well so there was no damage. The machine work on this kit is superb. It even caomes with a nice new gasket too which was a surprise. The kit fitted well with no hitches. Now I just need to sort out the ignition and see how this performs. Pleased with purchase. View detail
The BEST item for xsr!!!
This item is truly amazing, it works and aesthetically it looks brutal with top-notch finishes, totally recommended. -------------------------------------------------- -------- This item is truly amazing, it works and aesthetically it looks brutal with top-notch finishes, totally recommended. Powered by Google Translator View detail
ARCHI Change Rod Retainer
Package landed safely.packing tiptop.item is well built and solid.shifting is smoother than before..highly recommend.thank you team webike.more purchase to come.shop with ease with webike. View detail
DAYTONA Oil Clean Bolt
Item received.took 4 days to arrived.excellent.very well packed.item is solid.very light than the original bolt.magnet is strong.thank you team WEBIKE..never disappoint.highly recommended to shop. View detail
Fits: HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 1100
I wanted Hook in just such a place!
[How is it used?
I was thinking that it would be better if there was a loading hook around the lower part of the Rear Carrier of REBEL1100 to stabilize the loading.
Was the one you received as per Image?
A loading hook with a width of 20 cm can be attached around the top of the RearStop-lamp.
Was the installation difficult?
Bolt On and it is ready to install. It takes only 5 minutes if you are familiar with it.
How was your experience with it?
I just loaded a backpack on a Tandem seat with a rope. The loading hook attached to the suspension was too large in width, and although it was sufficiently secured in the horizontal direction, it was not secured enough in the front-back direction. Even if a backpacket narrower than the width of the motorcycle is loaded, it is firmly fixed in the front-back direction, and the shaking of the luggage is reduced.
[Included Parts:were they on?
The Instruction Manual is now available on the Net, so the accompanying explanations are also simplified.
[Was there anything that disappointed you?
Digitize! I would like to see the Construction Instruction Manual attached to the product without being digitized! I would like to see the Construction Instruction Manual attached to the product without digitizing it...It would be nice to be able to refer to it on the Internet anytime, but what if the company's policies change or the company goes bankrupt and the WebSite disappears? Also, the QR code is only a LINK to the WebSite, so I have to search for it by tapping the part number, and it takes a lot of time to start the construction. Can't something be done about it...
View detail