Reviews
Fits: YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25
It looks better now.
Model YZF-R25
The Rear is quite dirty and it is now clean. the Brake Caliper is OEM and the Pad is DAYTONA, but I am glad I replaced it. The braking power is normally increased and I am satisfied.
View detail
Valuable Exchange
Model YZF-R25
I replaced the Disc Rotor and all front brakes are now brembo. I am very satisfied and it was a worthwhile replacement. You can tell the difference from the moment you change.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
Has the part number been changed?
I have not seen any particular note, but I assume that if you order with this part number, you will probably receive the one with the -80 suffix, and from the aggregate information on the Net, it seems that some Filters, including the -61 one, have been unified with the new part number (-80 suffix).
It is a bit of a shock to receive a different part number without any explanation, but you will be able to use it without any problem.
View detail
When in doubt, SUNSTAR
Balance of lightness and durability, true circle, etc.
In terms of color variations and price, the xam is the better choice.
For now, you can't go wrong with SUNSTAR.
View detail
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
Fits: YAMAHA MT3, YAMAHA MT-25, YAMAHA MT03
Just fit in the current model
It can be installed on the current model (RH21J) MT-03 without any problem.
As is the case with other people's Impression,
Many of the products made by other manufacturers have logos or company names with decorative etchings,
If you are not good at such things, or if you prefer simplicity, this Radiator guard is a recommendation.
The manufacturing process is very solid and simple, which gives the manufacturer a sense of confidence.
View detail
After all, it's OEM!
Along with the oil change, I replaced the Oil Filter. I can't tell if the Oil Filter is good or bad right away, but it gives me a different feeling of trust and security. When I replace it again, it will be OEM. View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
![Brake Pad - ROAD [CC] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0321/25641066_20221226140428878_TS.jpg)
Used for MT-25 for Rear
[How is it used?
I replaced the Brake Pads on my MT-25, which I use for commuting and touring, because they were running low on remaining capacity before I knew it.
Although DAYTONA's Red Pad is the iron plate as an external pad, I was curious what brembo's CCCompound was like, so I purchased it.
Was the one you received as per Image?
It was just like the picture.
They are the same shape as the probably OEM Brake Pads that came with the vehicle when it was purchased, and naturally had no problem installing them.
Was the installation difficult?
If you have some maintenance skills, it is easy because all you have to do is remove the rear tire and replace the pad.
The Pad pin of MT-25 is just a pin that prevents it from falling out, so there is no need to worry about Bolt sticking.
Although no particular chamfering was performed, the braking power was sufficient from the start.
How was your experience with it?
The CCCompound is designed for city driving, so it is more mild than the previous pad.
The more the Rear locked up until then, the more it stays rotated without locking up when Brake is stepped on.
Although it is not capable of a heavy brake, it seems to be mild enough for normal driving in town.
I drove on a rainy day, but I did feel that the braking power itself was almost the same even with Large rain.
I have driven about a hundred kilometers since the replacement and there is already a little Brake dust.
This means that it is decreasing, so I think Life is not that long.
Brake Discs seem to be less aggressive, so it may be possible to improve the life of the Disc Side.
[Included Parts:were they on?
Brake Pads only.
Don't forget to Grease as well, as Caliper will also need to be maintained when the pad is removed.
[Was there anything that disappointed you?
It is not a disappointment, but I noticed after installation that the pad is quite conspicuous because of its blue color.
This is even more so with the MT-25, which has almost only Black around the rear.
【Review】
This pad is for street use, even in the rain.
It is not suitable for hard breaking, but it may be sufficient for 250cc for rear.
View detail
exchange
I bought this for a ZZr250 Rear Sprocketfor replacement, it is lighter than the OEMSprocket and looks better in Gold. It is an applicable product and I was able to install it without any modification. View detail
Master cylinder cap
Changed from Green Light to Gold. View detail
Ideal for Attachment power supply extraction
Ideal for taking out Attachment power supply
DL1000 V-STROM250SX is designed to be easily inserted into a connector of the same shape by removing the cover under the tandem seat to reveal the connectors.
I think this is a good product because power can be removed without damaging the Wiring.
View detail
Kitako Power Extraction Series!
Is it for SEA BASS/Yamaha?
I purchased this for my VSTROM250SX.
If you look for a lump at the bottom of the Rear Sets, you will find a Connector, which you simply remove and insert this Adapter between the Rear Sets.
It is very easy Exclusive Design!
View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
I would use it if I had it.
Product Name
KITACO KITACO Power Outlet Port Harness
Item Number
756-9000200
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect for customization and maintenance of the wiring process.
Why did you choose this product?
It is very easy to use, and it makes the wiring process easier.
Was the one you received as per Image?
It was exactly as shown in the Image. The price is right for the ease of installation. Just pull it out and insert it in between the two.
Was the installation difficult?
It is not difficult to solve. It's something that makes it easy.
How was your experience with it?
It is recommended if you are going to install an electronic device such as a DriveRecorder, etc. There are other fits besides YamahaManufacturer.
[Included Parts:were they on?
None in particular. Only a statement of explanation.
[Was there anything that disappointed you?
It would be nice if the price was lower, but it is good.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's a good product.
About quality and texture: I am glad to have received a plug that performs well.
About shipping and packaging: And the delivery was fast and accurate in all aspects. Looking forward to good deals in the future. About quality and texture
-------------------------------------------------- -------- About Quality and Texture: I am happy to receive a good plug. About Shipping and Packaging: And the delivery was fast and it was exactly delivered in every way. We look forward to a good deal in the future .about Quality and Texture Powered by Google Translator
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA TUONO 125, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL, DUCATI 1098, DUCATI 1198, DUCATI 1198S, DUCATI 1199 SUPERLEGGERA, DUCATI 749R, DUCATI 749S
Genuine Puig Hi-Tech Racing Grips
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost than I could source locally. With a few other small parts already in my basket, I got all shipped with my chosen courier which is of course EMS. They just get the orders delivered fast and I mean fast. Thsi all arrived in 5 days from being shipped which you cannot argue about. The grips themselves came in the standard Puig packet/box and were also covered in bubble wrap to keep them safe. The colour is more true to a copper than I would say orange but as it happened, this worked perfectly with the colour scheme of the bike anyway, win win. I personally have never tried this style of grips but once fitted, they do feel alright. I have to say though, the finish and quality of these are absolutely awesome. Really good CNC work on them and the grip part is super grippy so no issue with slippage. The customer is very pleased so thanks Webike, nice one. View detail
It's easy
If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail