Reviews
Perfect for dress-up!
The dress-up effect is great.
It also feels right in use.
View detail
Fits: KAWASAKI ZZR1100 D, KAWASAKI ZZR1100 C, KAWASAKI ZX-10, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ1100 , KAWASAKI GPZ1000 RX
Black will not fit without shaving due to the thickness of the surface treatment.
I cleaned up the cist Shaft with Paper but it was too tight to fit, so I had to rub the Bearing Inner Ring with Paperetc. a lot to get it in, although not enough to drop the Plating.
The reason may be the thickness of the plating, since I purchased it in black, but after inserting it into the Shift shaft, it turned smoothly, so it may be due to a slight thickening and deformation of the splined area near the shaft due to processing distortion.
The bearing was also reluctant to move, but after placing it in the shift shaft, it rotated smoothly, so I decided that the bearing would rarely rotate and assembled it as it was.
It would be nice if the price was a little lower.
View detail
Stable Explosive Power
Large cutting Plug that sends strong sparks flying.
Since we have installed Uotani SP2, PlugGap is spread out as specified.
This purchase is as a spare part.
View detail
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
Fits: KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-10, KAWASAKI ZZR1100, KAWASAKI ELIMINATOR 750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS
DAYTONA Oil Change Perfect set
Would buy again.
because it's easy
View detail
I have no particular problem using it.
It is a consumable item that is used for a short period of time, so it is very helpful to be able to purchase it at a reasonable price. I have no problem using it. View detail
Fits: KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-10, KAWASAKI ZZR1100, KAWASAKI ELIMINATOR 750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS
Reliable Brand
I plan to use it on my GPZ900RA4, which is an old motorcycle, so I chose this product because it has all the oil seals I need. View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Idling stabilized?
I changed the oil as part of maintenance, and it seems to have stabilized the idling, but I don't feel that the power is increased. I really don't know if the period to change the oil was too short and the oil was not so deteriorated, but it is an old motorcycle and I will replace the oil as soon as possible. Next time I will buy a Torque wrench and tighten it with the specified Torque. View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI GPZ1000RX, KAWASAKI ZRX1100
OEM alternative.
I have been abusing my car, Clutch, which is 90% safe driving lessons and 10% touring, so it finally slipped. That is why I had no choice. I purchased this one and replaced it.
GPZ900R, but the engine has been replaced by GPZ1000RX, so please be careful when purchasing parts. disc, plate, and spring are one more than 900, and everything is in one pack except Gasket and Oil, so it is easy to change to Large kit. The kit is easy to use and convenient.
The disc corks are painted blue, but the OEM disc has a slit at an angle, but this is a very common type. The cork of the disc has a diagonal slit on the OEM disc, but this disc has a very common type of slit. Before assembly, it was necessary to soak the disc and plate in oil. When assembling the spring, the push rod is pushed, so you must push the center as hard as you can before assembling the spring. If you don't do this, I think you will break Housing.
After the replacement, the clutch lever felt heavier than the Large lever.
We had been using ZX-14 Release and MASTER to reduce the weight of the clutch lever, but after replacing it with this clutch kit, the weight became about the same as that of a NORMAL GPZ900R. Meet point is a little far? I wonder if it was like this.... It is like this.
As for the performance, let me just say Good!"
The clutch was slipping and I had no choice but to replace it with this kit instead of the OEM one. Hopefully, it will last longer than the OEM.
View detail
To match the Gold amount up to free shipping.
As per Title, I bought it to get free shipping.
We strictly follow the routine of one in every two Oil changes, so this is fine.
This one also has an O-ring attached, which is convenient.
There were two types of large O-rings in the package. I used the one with the smaller diameter wire, but I think it is fine.
Is it because of these two types of O-rings that I feel like there are so many compatible car models listed?
A certain "Kansai Soul", which is only cheap, is poorly made, but I think this one can be used with peace of mind.
View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
usually
The GPZ900R Plug is
NGK recommends DR9EA, an improved version of DR8ES
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
NGK DR9EA 3437
There was some corrosion, so we will replace it regularly from now on. View detail
Purchased for CB750four
I expect Magnet effect because I have had iron powder mixed in before. View detail
Element is always this!
Required Packing on OEM Equivalent Product (excluding Drain Washer) It is easy to use because everything is included in the package. View detail
Magnetized, higher than OEM
I always use OEM, but this time I switched to KIJIMA's Magnet. We will see how it goes. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX, KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11
Just for the looks
Bought the Over racing slave cylinder so I figured while in roam I may as well add this just to complete the total aftermarket look using high end parts. The Over racing slave cylinder fit pretty well in the Nitro racing clutch release plate, just a few passes with a file on the inside of the plate to get all the hardware lined up for installation; not a big problem or a deal breaker for me when dealing with aftermarket parts no matter who makes them. View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Fits: KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX
Satisfied with increased custom feeling
It has a visual effect, it gives a more custom look, and it is a good parenthesis. I think it is lighter than OEMCover in terms of performance. Maybe.
As for installation, it is relatively easy since it is just a replacement for the OEMCover.
View detail