Reviews
Fits: DUCATI HYPERMOTARD 939 SP, DUCATI XDIAVEL S, DUCATI MULTISTRADA 1200 DVT S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V2 S, DUCATI STREETFIGHTER V2, DUCATI PANIGALE 899, DUCATI PANIGALE 959, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE V2
I love it, but...
I like the texture and design.
Even when tightened to the end, the inner groove on the clutch cover side? The edge of the O-ring seems to collide with the edge of the cap side. The edge of the cap side seems to collide with the inner groove of the clutch cover side even though it is tightened all the way. I am worried about the OIL blotch. I am worried about OIL seepage when I use it from now on.
If it's not there, it's not a problem.
View detail
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91887_O01_TS.jpg)
As expected of DAYTONA
Was the installation difficult?
pimping
How was your experience with it?
It's going to look different
View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91889_O01_TS.jpg)
Dress-up in a casual way
It can be dressed up casually.
I am satisfied with the quality of the product.
It would be better if it were a little cheaper.
View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91885_O01_TS.jpg)
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
It's nice and casual.
It's nice and casual, the texture is okay. View detail
Oil Filler Cap
Changed to Green Light or Gold. View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Caliper seems to drag less ….
There will be a slight impact on the push/pull of vehicles.
I feel that the Chassisisis sound when pushing the vehicle has become a little quieter and the resistance I was feeling has become lighter.
I thought the product was satisfactory to the extent that I felt it was.
View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
Custom in Red color Bartz
Black color body in Custom with Red color verts.
The number of small red-colored sections has increased again.
I was satisfied with the solid construction of the bars, the device was easy to use, and inexpensive as well.
Naturally, there is no change in driving.
View detail
Fits: DUCATI MONSTER 900, DUCATI STREETFIGHTER V2, DUCATI MULTISTRADA 1200 DVT S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 950, DUCATI HYPERMOTARD 1100 EVO SP, DUCATI HYPERMOTARD 1100 EVO, DUCATI HYPERMOTARD 1100 S, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 821 SP, DUCATI XDIAVEL S
I received an item that did not look like the picture.
Note that you will receive a design that is completely different from the image!
Bolt came with only DBK written on it.
WeBig, manage your Page properly.
Too many items are in stock when there are no items in stock or anything like that, and too many other miscellaneous things!
View detail
PetitCustom
[How is it used?
It has a custom feel.
Was the one you received as per Image?
As you wish.
Was the installation difficult?
It's very easy.
How was your experience with it?
I like it at One point.
[Included Parts:were they on?
Hexagonal Lunch is not enclosed.
[Was there anything that disappointed you?
None
Other items that would be helpful
Remove Oil cap for NORMAL It is easy to install.
I wish it had come with a Wrench, but ….
The first step of the Custom project was the installation of the new system.
View detail
Fits ZX-4R
It can be attached to ZX-4R without any problem. View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Side Stand is perfect!
Panigale and Streetfighter boots do not have good footing for most Japanese people. I am 177cm tall, but when I use a type of racing boots with the heel covered with a resin protector, like the ones from Pine Starz, the part where the heel hooks onto the side stand is too short and I slip and run away. When I am in the riding position, I can get it out with about a 50/50 chance, so when I am in good health, such as when I am refueling, I can stick it out a few times, but when I am tired, I can't get it out. No more." and I had to get off the Motorcycle and take out the Side Stand. If I had a normal leather or rubber bike, I would be able to get off the motorcycle and put out the Side Stand without any problem.
The AELLA product is almost twice as long as the AELLA product, so the Side Stand can be easily produced.
View detail
Raise the mood!
[How is it used?
Both for Brake and for Clutch are used.
Was the one you received as per Image?
No change from previously purchased items.
Was the installation difficult?
Easy installation by simply aligning the slit with the Arm section.
How was your experience with it?
The atmosphere is changed compared to the standard condition.
[Included Parts:were they on?
Included Parts:are not available.
[Was there anything that disappointed you?
A little more durability would be nice.
View detail
Difficult to install on ZX-25R, maybe body issue?
When I installed it on my ZX-25R, it became hard in the middle and could not be tightened all the way. It was floating so much that you could see it.
When I went to Home center and bought a Nut with the appropriate Pitch and tried it, I was able to tighten it to the end, so it may be a MotorcycleBody issue.
Not knowing if I could tighten it by force, I brought it to Kawasaki Plaza for regular maintenance and had it tightened. (I don't know what adjustments were made, as I didn't see them)
After that, there is no problem, especially no Oil leakage.
I'll try Wiring next time.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Wiring ingenuity required
The original wiring is surprisingly long and there is almost no space for it.
If possible, I would like to see ShortWiring or a storage boxetc. on the back of the number.
Also, it was difficult to understand where to use the original screws and the screws that came with the product.
It would be even better if the Number angle could be adjusted.
I dare to be harsh in anticipation of Moto Crazy's future.
View detail
Cost-effective dress-up
I purchased this product because I liked the simple design and more affordable pricing than other companies.
Since the mounting is hexagonal, it is difficult to tamper with by hand like the OEM, and I expect it to be somewhat tamper-proof.
The color of Gold is slightly lighter than Posh and Babyface, but once you get used to seeing it, it doesn't matter much.
The O-Ring is also included, so it can be popped in as is.
View detail
Exchange to One point
We replaced the OEM with this Cap.
I replaced it for the first time and it is very good for one point around the engine.
I'm glad I replaced it
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Can Refreshing the Rear
[How is it used?
The state of the OEM was not to my liking,
I installed it immediately.
Was the one you received as per Image?
It was exactly what was listed.
Was the installation difficult?
Torx wrench is required to remove OEM Parts.
Also, since the application of Screw lock is described for tightening,
We prepared this one as well.
DUCATI's License Frame is handled by drilling some holes in the frame,
Double-sided tape fastening without screw tightening was fine.
How was your experience with it?
OEM condition is unknown, but Rear tire sprung Small stone, etc.
Protection film was applied to the Tail lamps.
In addition, the OEMReflector had a crack in the threaded part of the OEMReflector at that time,
Replaced by DAYTONA.
If the Tail cowl is to be removed, it will interfere with the Tail cowl,
The Fender Eliminator must be removed first.
[Included Parts:were they on?
It comes with a handling Instruction Manual and several screws.
[Was there anything that disappointed you?
Not particularly.
View detail
Fits: DUCATI Panigale V4 2018, DUCATI Panigale V4 S 2018, DUCATI Panigale V4 Speciale 2018
Tank to Beauty!
[How is it used?
It is an OEM Product and has a good design.
Was the one you received as per Image?
It was just as I saw it in Catalogue.
Was the installation difficult?
When I purchased Motorcycle, I had it affixed at the Shop.
Caution The label will overlap with the position where the label is attached,
The Label is removed and stored.
How was your experience with it?
I pasted it because of the forward tilt and the close proximity to the Tank,
It protects us from Wound.
[Included Parts:were they on?
Included Parts:are not available.
[Was there anything that disappointed you?
Not particularly
View detail