Reviews
It works better than ZETA's Pad!
I installed it on my gasgas EC250 which I always use for forest road touring.
I used to use ZETA Brake Pads, but I had a symptom that the brake did not work too well on descents, and my arms would go up when I rode for a long time or during high-load Situations such as Race.
So I started working on improving Brake and the first thing I bought was Brake Pads.
It was not a drastic improvement, but it works better than ZETA's Pad, and it can stop with a little less Speed in Downhill, etc. However, I still have the impression that a little more StopPingPower would be nice.
View detail
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Genuine DID 520 Replacement Chain Link
I always like to have some of these in stock in case opf any issue during fitting different chains. The DID 520ERT3 is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Changed from Clip to Crimp
When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.
I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it.
View detail
![Brake Pad - OFF-ROAD [SX] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0276/23955293_1_TS.jpg)
Keep a spare supply of consumables so they can be changed at any time.
Purchased for TC125. Brake Pads are available from other Manufacturers such as RK, Vesla, ZETA, etc., but I chose OEM because the price is almost the same at the fixed price Base.
The fee ring is the same as the one currently attached (I think), so the fee ring should remain the same.
Since this is not a vehicle that I ride frequently, it is important for me that this fee ring remains the same.
If the fee ring is changed, the riding will become awkward.
I have a stock of these Brake Pads so that I can use the consumables whenever I need them, just as I do with Levers.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Rivet Joint
Is the price going up?
Everything is going up in price.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI RM250, SUZUKI DR200, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA FTR250, HONDA CRF250R, HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500
DIDClip joint is stable.
Product Name
DID Daido ERSeries Joint link 520ERVT
Item Number
520ERVT_G&G-FJ
Vehicles
KTM 250EXC-F (2022)
Number of man-hours
About 30 minutes
Why did you choose this product?
Because the Clip has come off.
Was the one you received as per Image?
As per Image.
How was your experience with it?
I still prefer DID Joint link for DID Chain.
The construction is solid and the Gold shine is beautiful.
Clip is easy to fit and perfect.
[Points to note]
If you do not press-fit the Clip firmly when stopping the Clip, the Clip will break.
To apply the supplied Grease.
How did it compare to other products?
I feel comfortably at ease.
Items to buy together
DID Daido:520ERVT_G&G-118FB
ERSeriesChain 520ERVT Gold Includes light press-fit Clip(FJ)Joint
View detail
Fits: HUSABERG FS650e, HUSABERG FS450e, HUSABERG FS650c, HUSABERG FS450c, HUSABERG FC550, HUSABERG FS400e, HUSABERG FC450, HUSABERG FE600e, HUSABERG FE650e, HUSABERG FE501e, HUSABERG FE550e, KTM 690ENDURO, KTM 450EXC-F, KTM 500EXC-F SIXDAYS, KTM 400EXC-RACING, KTM 350SX-F, KTM 525SX, KTM 250SX-F, KTM 400SX, KTM 450SX
Used for Front forkOH of HUSQVARNATE250
I used it to overhaul the front fork of HUSQVARNA's TE250, which is on my forest roads, Enduro, and sometimes HardEnduro-like play.
The oil was not leaking from the fork seal, but the seals had to be replaced because the OEM parts had to be imported from overseas. After ordering, it was shipped immediately and arrived at my hand.
I have actually installed it, but have not driven it yet, so I do not know the effect, but I am looking forward to seeing how the responsiveness of the suspension will improve at uneven terrain, etc. since the friction will be reduced.
View detail
Fits: HUSQVARNA , KTM 650 series, KTM 950 Series, KTM 990 Series, KTM 250EXC-F, KTM 250EXC-F SIXDAYS, KTM 350 FREERIDE, KTM 350EXC-F, KTM 350EXC-F SIXDAYS, KTM 500EXC-F, KTM 500EXC-F SIXDAYS, KTM 250EXC-F, KTM 250EXC-F SIXDAYS, KTM 350 FREERIDE, KTM 350EXC-F, KTM 350EXC-F SIXDAYS, KTM 500EXC-F, KTM 500EXC-F SIXDAYS
I was worried, but I got a good fit.
[How is it used?
I used it on my 2016 KTM.
If we went to the trouble of ordering Drain as OEM, the price would be outrageous.
Thank God it came from KIJIMA.
How was your experience with it?
The Size is perfectly fine.
The OEM and Material are different, but they work fine.
How did it compare to other products?
It is cheaper and more readily available than OEMs, which is good.
View detail
Fits: bimota DBX, bimota DBX 1100, YAMAHA YZF-R125, YAMAHA YBA125 Enticer, YAMAHA XT660Z Tenere / ABS, YAMAHA X-MAX, YAMAHA X-MAX 250 / ABS, YAMAHA X-MAX 250 / ABS, YAMAHA Versity., YAMAHA Versity., YAMAHA Versity., YAMAHA TT600RE, YAMAHA TT600R, YAMAHA TT600R, YAMAHA TT600E, YAMAHA TT600E, YAMAHA TT600 Acier, YAMAHA Maxster., YAMAHA Maxster., YAMAHA Majesty 125
The compatibility chart is wrong.
I searched for a product that fits BMW K1300S, and VD-947JL was displayed, so I bought it. The part number of OEM pad for K1200S, K1200R, K1300S, and K1300R is the same, and the part number for K1300S is also the same. The part number of OEM pad for K1200S, K1200R, K1300S and K1300R is the same, so I think you should use ZV-VD947/2JL which has different thickness inside and outside as well as OEM pad.
I am satisfied with the performance of the Pad, but this will shorten its life.
View detail
Fits: bimota DBX, bimota DBX 1100, YAMAHA YZF-R125, YAMAHA YBA125 Enticer, YAMAHA XT660Z Tenere / ABS, YAMAHA X-MAX, YAMAHA X-MAX 250 / ABS, YAMAHA X-MAX 250 / ABS, YAMAHA Versity., YAMAHA Versity., YAMAHA Versity., YAMAHA TT600RE, YAMAHA TT600R, YAMAHA TT600R, YAMAHA TT600E, YAMAHA TT600E, YAMAHA TT600 Acier, YAMAHA Maxster., YAMAHA Maxster., YAMAHA Majesty 125
Used for EnduroMachine
[How is it used?
I used it for EnduroMachine.
I'm still using it.
How was your experience with it?
I used it on my Enduro for 8 hours and it worked decently even on steep hills.
Excellent cost-per-performance!
The performance is good enough to be used in the race, so if you are riding on the street, you should have no problem.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI RM250, SUZUKI DR200, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA FTR250, HONDA CRF250R, HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500
It's a little difficult!
CRF250L I changed the Chain from 106LINK to 108LINK with the Sprocket change of MD47, but I failed to press fit Crimp press fit type at first, so I changed to this press fit Clip type.
After all, it was very difficult to get the right amount of pressure.
As an added bonus, I installed the Clip backwards and managed to remove it and re-install it, but I'm worried because it's a bit distorted, so I may buy it again.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Purchased as a spare
I bought this as a spare for my Crimp.
Now you can exchange Chain with confidence.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Crimp's reliability is outstanding
I bought the Clip type by mistake when I purchased the Gold chain and added it to my order.
I like the CrimpType for safety and reliability because it's dedicated to Touring and I'm afraid it might break off at a distance.
View detail
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, HONDA FTR250, HONDA CRM125, HONDA 400X, HONDA 400X, HONDA AX-1, HONDA CB223S
This accessory is really good
My car is KAWASAKI’s NINJA 400, model year 2019. I changed the DID 520VX3 chain to the car before, because it was the first time I installed it by myself, and the attached link ring was broken when I installed it. This thing is not easy to buy in China. Thanks to the WEBIKE, it is perfectly installed. There is no problem in using it so far. ---------------------------------------------- My car is 400 , the 2019 models of KAWASAKI NINJA. Prior to the car to change the DID 520VX3 chain, because it is the first time to install their own, when loaded to the supplied link ring ruined, this thing is not good to buy in the country, thanks to the WEBIKE, perfect installation. Use has been no problem. Powered by Google Translator View detail
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, HONDA FTR250, HONDA CRM125, HONDA 400X, HONDA 400X, HONDA AX-1, HONDA CB223S
Actually, I don't use it … …
For the first time, I decided to replace the CrimpType chain and bought it.
I bought it because I thought I needed a Joint, but the Joint is also attached to the Chain, and it's a good thing. I didn't have to jump to any conclusions.
The reason is that DID is designed to make it easy for newcomers like me to use ChainCrimp. Crimp's meticulous instructions for the Manual and sample Crimp spread is included in Package and The WebSite teaches you how to do this, so if you have a decent Caulking Tool, you can't do anything with There was no anxiety.
If Chain runs out, I might use it, but so far there is no sign of that. It's not at all, so it's just a good luck charm …….
View detail
Fits: SHERCO 250 SEF FACTORY, SHERCO 300SEF FACTORY, SHERCO 450 SEF FACTORY, SHERCO 300SE FACTORY, SHERCO 250SE FACTORY, SHERCO 450 SEF SIXDAYS, SHERCO 300SEF SIXDAYS, SHERCO 250SEF SIXDAYS, SHERCO 300SE SIXDAYS, SHERCO 250SE SIXDAYS, SHERCO 125SE SIXDAYS, SHERCO 450SEF RACING, SHERCO 300SEF RACING, SHERCO 250SEF RACING, SHERCO 300SE RACING, HONDA CR250R, HONDA CR125R, SHERCO 250SE RACING, SHERCO 125SE RACING, GASGAS enduroGP300
The ride height has been lowered
I use it for KTM, but OEM PowerParts has a Rear shock RoseStripes, this is a Spring-less, jig and press, Jacketc. If Shock is pushed in with a jig, PRESS and Jacketc It is impossible for the amateur After installation, it lowers 30mm. it is necessary to replace with Front and Rear Set The original suspension performance, the extension side was affected a little, well, this is how it is View detail
Fits: bimota DBX, bimota DBX 1100, YAMAHA YZF-R125, YAMAHA YBA125 Enticer, YAMAHA XT660Z Tenere / ABS, YAMAHA X-MAX, YAMAHA X-MAX 250 / ABS, YAMAHA X-MAX 250 / ABS, YAMAHA Versity., YAMAHA Versity., YAMAHA Versity., YAMAHA TT600RE, YAMAHA TT600R, YAMAHA TT600R, YAMAHA TT600E, YAMAHA TT600E, YAMAHA TT600 Acier, YAMAHA Maxster., YAMAHA Maxster., YAMAHA Majesty 125
OEM replacement is sufficient
Regardless of the weather, I feel that it shows stable performance.
In the case of luxury goods, they are being chamfered, but since this product has not been done, squeal etc etc. Measures are necessary if you are concerned.
View detail