Reviews
Fits: HONDA XR600R, YAMAHA WR450F, HONDA VFR750R, HONDA XR600R, HONDA XLR250R Baja, HONDA RVF750R, HONDA VFR400R, HONDA RVF400, HONDA NSR250SP, HONDA NSR250SE, HONDA NR750, HONDA CR250R, HONDA NSR250R, HONDA CRM250R, HONDA CR125R, HONDA AX-1
After replacement, you can feel it immediately.
I tried using a cheap pad, but felt insecure about its effectiveness, so I replaced it with this product.
I realized that it was completely different.
You're right about a near standard product that's been on the market for quite some time.
I thought there was.
View detail
It is Repeat
If you use the others too, it's not worth the cosmetic cost.
You can see that the quality is good.
View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, HYOSUNG RX 450 SM, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SMR 630, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R
I am satisfied with the product. (Failed in Spring Sale lol) )
Yaay! If you buy in the afternoon on 3/24, 3,198 yen became 2,962 yen with the Spring Sale, or you bought in the morning! (Lol)
I replaced the front brake pads and now it stops when I snap it, so I'm going to replace the rear brake pads with new ones.
Pull the clamping shaft out to the back, pull the old one out to the front and frame the new one….
Hmmm, it won't fit… I have to push the pot in because it's thicker.
Disc Brake Piston Tools
https://www.webike.net/sd/20205012/
Press back against the
I'm not sure if it's time for an overhaul.
But I thought the exchange was over.
It was originally scuffed up with air biting and completely scuffed up. So, I connected DrainPipe and used a syringe type
https://www.webike.net/sd/1647527/
I did air ejection, but the Brake pedal is too skunky and Fluid is not coming out.
I might be able to get a better one with a Small Type Vacuum pump, but it won't be ready today or tomorrow, and I can't be sure.
I can't help myself today, so that's it.
The next day, I went to Red Baron in Asaichi! (Lol)
I'll write the full story in the shoppreview. (Lol)
View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Adding a little something to the look and feel
A product that unifies the Custom.
Replace the Engine with the one you are using after it cools down.
View detail
Fits: HONDA XR250, HONDA XR250R, HONDA XR250 MOTARD, HONDA XR230, HONDA XLR250R Baja, HONDA XLR250R Baja, HONDA XLR250R, HONDA XLR250R, HONDA XLR200R, HONDA XLR125R, HONDA SL230, HONDA CRM250R, HONDA CRM250R, HONDA CRM250R, HONDA CRF450R, HONDA CRM250AR, HONDA CRF250R, HONDA CR125R, KAWASAKI KX250, KAWASAKI KX250
Pad to choose from for now.
The Vesla Sintered pad on my used car was not working well, so I replaced it with this one.
Control is good, as it seems to work in proportion to the strength of the grip.
Braking power is also sufficient.
I think we have found a good balance between price and performance.
View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Texture is good!
I was worried about Titaniumium gold, but decided on Black so that it would not stand out too much.
As expected from MORIWAKI, it is well made.
Just … I would appreciate it if it was a little cheaper.
View detail
Fits: HONDA CR125, HONDA CR250, HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRM250R, HONDA CRM250AR, HONDA XR250
Very nice product for the price.
Love the look! I had purchased some after market lower fork covers and they were getting very hammered from normal use.Well made graphics and thick for protection to my new plastic.Otherwise the graphics are thick and durable, after riding through the bush a few times there is hardly any noticeable scratches. WOW! Made the fork look like new! The actual decal is very thick, so I expect they will last a long long time. Fork guards are not round but have creases so use a heat gun to ease installation to mold around the plastic. View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Excellent Quality Oil Filler Cap
The part itself is very well made. The packaging is very Japanesque in style. Made me miss Japan even more if your familiar how items/food/gifts are package. Amazing how such a small part can make a difference in the look of the engine. Thank you MORIWAKI engineering team and Web Bike Japan. The package arrived super fast through USPS/EMS. - USA submission View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
While we're at it!
It had deteriorated, so I decided to use NGKPower cable, which has a proven track record and reliability, while replacing it. I think it is stable. View detail
Fits: HONDA XR250, HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS (Bewith), HONDA monkey
Not available
It was designed for BANDIT250v, but in fact it is short and not a penetrating type.
It was useless.
View detail
Fits: KAWASAKI KLX230R, KAWASAKI KLX230, KAWASAKI KLX300R, SUZUKI 250SB, YAMAHA YFZ450, KAWASAKI KLX250SR, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI VERSYS1000SE, YAMAHA WR250R, YAMAHA WR250X, KAWASAKI KLX250, KAWASAKI D-TRACKER, KAWASAKI KLX250ES, YAMAHA SEROW225, YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ450FX, YAMAHA YZ250FX, YAMAHA YZ250X
Texture UP!
I think that replacing the OEM parts with these parts will considerably improve the quality.
Easy installation is a GOOD thing!
View detail
Fits: HONDA Forza(MF10), HONDA Forza(MF10), HONDA glom, KAWASAKI ZX-9R, KAWASAKI ZX-RBF, KAWASAKI ZX-RAFA, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-14R, KAWASAKI Z125 Pro, YAMAHA YZF-R25, YAMAHA YZF-R3, KAWASAKI W650, HONDA NC700X, HONDA NC700S, YAMAHA MT-25, YAMAHA MT-03 (2015-), HONDA CRF1000L Africa Twin, HONDA CBR400R (2013-), HONDA CBR250RR(2017-)
Dare Iron
I like the fact that it is made of steel. 1 pc does not need Aluminum, which is not even light enough to be Large and has a high breakage risk.
If there is an Oil Filter, it would be Large sturdy, but if you remove it, it should not be Minus because there is actually a lot of iron powder on it.
Wiring holes are available for circuit driving.
I would like CostCut to omit the attached Wire, as I think people who are wiring in the first place have it on a roll.
View detail
Fits: YAMAHA YZF 450, YAMAHA YZF 400, YAMAHA YZF 426, YAMAHA YZ 250, YAMAHA WR F 250, SUZUKI RMZ 250, SUZUKI RMZ 450, KTM XCW 525, KTM XC 525, KTM XCG 525, KTM SXS F 450, KTM SXS 540, KTM SXS 250, KTM SXS 450, KTM SXC 625, KTM SX SXS 125, KTM SX 300, KTM SX F 250, KTM SX 250, KTM SX 144
Stroke type
It may go without saying, but replacing the Master Cylinder does not increase braking power.
Merit is LaborTouch and Controllability.
The OEM touch is tight and doesn't stroke much after it starts to work, but the brembo strokes with a gnarly motion.
It is easy to Control because of the long drawback, but I don't feel like it is Direct for me.
It is not very short.
The improvement in visual quality is remarkable since the original is a Tank-integrated horizontal installation.
View detail
Fits: HONDA CR80, HONDA CR125R, GASGAS ENDURO GP300, GASGAS ENDURO GP250, GASGAS EC300, GASGAS EC250, SUZUKI RM80, SUZUKI RM250, SUZUKI RM125, SHERCO 500SEF FACTORY, SHERCO 500SCF FACTORY, SHERCO 450SCF FACTORY, SHERCO 300SCF FACTORY, SHERCO 300SC FACTORY, KAWASAKI KX250F, KAWASAKI KX250, KAWASAKI KX125, SHERCO 250SCF FACTORY, SHERCO 125SC FACTORY, SHERCO 250SC FACTORY
Easy air bleed
I got a YZ125 and asked my fellow YZ riders what they needed. I asked him what he needed, and he told me about these Air Vent Parts, so I bought them.
In NORMAL, air venting is done by turning a slotted screwdriver, and the handlebar was in the way, making it difficult and frustrating to vent the air easily.
Installation, I just remove the OEMMinus and install it, but I didn't know how far to insert it (I found out later that there is a specified Torque, but...).
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
HUNTER Grips
HUNTER Grips Excellent grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! Great grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! View detail
Fits: HONDA CR125, HONDA CR125, HONDA CR250, HONDA CR250, HONDA CRF250R, HONDA CRF450R, HONDA CRF250X, HONDA CRF450X
CRF250
I am very satisfied with the price and appearance. View detail
Fits: HONDA CRF450RX, HONDA CRF250X, HONDA CRF250 RALLY, HONDA CRF250R, HONDA CRF250M, HONDA CRF250L, HONDA CRF150R, HONDA CR250, HONDA CR125, HONDA CRF450X, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF450R
Solid pegs, excellent price.
Very similar to OEM pegs. Black finish proving durable and plenty of grip on my boots. Best of all is the excellent price compared to the exotic works pegs. Absolutely a great upgrade for your bike. Didn't think I'd notice much of a difference, but could tell they were better than stock within the first 2 minutes of riding. They offer way more support, and feel a lot more stable while standing. These pegs are worth every penny, and I'm surprised they were so affordable!! Mounting was super easy, and I'd recommend getting a couple of new cotter pins to replace the stock ones on your bike. View detail
Fits: SUZUKI RM-Z250, SUZUKI RM-Z450, SUZUKI RM250, SUZUKI DR-Z400SM, SUZUKI RM125, HONDA CRF450X, HONDA CRF450R, HONDA CRF450RX, HONDA CRF250X, HONDA CR250, HONDA CRF250R, HONDA CR125, SUZUKI RMX450Z 10-17, SUZUKI RMX450Z 10-17
better than factory
The brake pin looked like oem quality and fit inside the caliper perfectly. DRC products are really good, a little bit expensive. I prefer hex head instead of allen. Especially when allen tend to take over a bit after a while.Had to drill my oem ones out because they seized in my calipers and the Allen heads stripped out. Got these to replace them. The fitment was great and installation was easy. I've run them for about six rides so far and haven't seen any problems.Overall perfect fit. It looks very solid and high quality. Shipping is very fast, very well packaged. arrived in 1 week View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Replaced with Hyper Ignition Coil.
Replaced with Takegawa's Hyper Ignition Coil.
This can be easily replaced by simply cutting and connecting a long Cable.
View detail
Fits: HONDA CR250, HONDA CR125, HONDA CR450X 04-14, HONDA CR250X 04-14, HONDA CR450F 04-14, HONDA CR250F 04-14, HONDA CR450X 04-14, HONDA CR250X 04-14, HONDA CR450F 04-14, HONDA CR250F 04-14
Great product, easy install and better than stock feel.
I felt like stock was fading and not at full stopping power even though it wasn't worn yet. I switched to this and it made a big difference. I felt I had more modulation and stronger stopping. Very happy with results and will probably stick with the brand permanently. Great worthwhile upgrade.
I wish the stock ones felt this good. Now, I hope they put last the 10k miles the stock ones lasted before getting warped
WIth new brake pads, the pads and rotor took a while to mate together but by the afternoon of the ride, I did notice better braking quality than stock, especially on the downhills.
View detail