Reviews
I was attracted by the Gold color and bought it, but… I was not sure if it would work or not.
I tried replacing it with a Gixxer 250 Rear pad, but the braking force is much weaker than OEM and relies on the Front brake. it may be a compatibility issue with Caliper, but I can't get used to it, so I'm going back to NORMAL. View detail
Made by Wonderlich, a trusted manufacturer
Made by Wonderlich, which is reliable but expensive.
It would be nice to be able to easily extract power from the back of the Heller Socket.
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
![Brake Pad - ROAD [SP] Compound](https://img.webike-cdn.net/catalogue/images/114748/Road-SP_TS.jpg)
I knew it! Brembo!
The Pad that originally came with it was getting very thin, so we replaced it.
At first, I wondered if the stop was worse than before. I thought that it was worse than before, but I drove on.
After running for a while and some heat, it settled down to a smooth stop, just the way I like it.
KTM is a BYBRE Caliper, which means that the braking power is fine, but until now it has felt like it was working too hard for me with the kakkun.
If you are asking if brembo's Pad is unstoppable, rest assured that it is not at all.
The brake system is brembo after all.
View detail
Fits: DUCATI 848, YAMAHA FZ400R, YAMAHA XT660X, YAMAHA XJR1300, YAMAHA V-MAX 1680, YAMAHA SRX600, YAMAHA SRX400, YAMAHA FZR250, YAMAHA FZR750, YAMAHA FZ750, YAMAHA FZ400, YAMAHA FJ1200, MV AGUSTA BRUTALE R989, KTM 640LC4 DUKE, DUCATI MONSTER 1200S, DUCATI 748R, BMW G650 XMOTO, BMW F800ST, BMW F800S, BMW F800R
Control is the best!
Control leaves are excellent due to the stiffness from the thick back plate, good firing, and good material.
It doesn't bother me because I use it on the circuit, but on the street it squeals until it heats up.
The thickness of the friction material itself is not Large, so I think the durability is fairly normal.
View detail
safety
DUCATI SCRAMBLER2020 Rear Wheel Brake
The original pad is from bremboOEM, but we replaced it with this one.
When I first started using it, I was worried that it wouldn't work…? But as I let it sink in, it worked just as described. It works as long as you hold it/step on it." I feel that it is more Mild than OEM.
I think it is suitable for running like adjusting the speed with the rear brake while keeping the RPM low with a tight corner.
As for durability, I don't know since I've only just started using it.
View detail
Handlebar Cover is pampered
However, these are Handlebar Gloves, so they are safe.
I was able to install the GIVI Hand Guard ExtensionEH5108 with no problems.
View detail
Reliable Brand
Brembo is now the standard equipment on the upper models, but the red color is very noticeable because of the fine detail on the Brake Pads.
SPMODEL is a product that is not intended for racing, so it can be used on public roads.
The product itself is easy to Control and feels good.
View detail
Great looks. as a cap bolt….
Do not over-tighten or apply Screw lock agent by mistake, as the material is material and will quickly lick the hex holes.
I want to install it firmly because it is for fixing Stay which supports important parts around Handlebar ….
View detail
Easy to use with OEM Fee Ring
Some pads work with a Snap at the moment of grip, but a pad that works too hard is nerve-wracking when you want to slow down while dragging the Brake a little.
The Pad here has a Fee Ring that is close to OEM and is gentle at the beginning of the grip, making it easy to control the Brake.
Of course, it works well if you hold it firmly.
Breaking has become more enjoyable after adding this pad because it works consistently in a sensible speed range, regardless of weather conditions.
View detail
Expect performance of Rear-specific Compound
Used on F800GS 2013 Rear.
First of all, it looks good.
Not only the back plate, but also the sides of the lining are bremboRed.
I am satisfied with the large size and the change in appearance when installed.
Since it is used for city driving~touring in Maine, it is more important than absolute braking power to have control that allows fine speed adjustment, and to be able to adjust the quantity to the weather conditions.:Pair (for Left and Right) Expect Brake performance that will not be
My impression after driving only about 10 km on the way home from Shop is that the braking performance is sufficient for our needs.
We have a perimeter and would like to explore the differences with the OEMPad from now on.
View detail
Fits: BMW F650CS, BMW F650GS Dakar, BMW F650GS TWIN, BMW F700GS, BMW F800GS Adventure, BMW F800GS, BMW F800GT, BMW F800R, BMW G650 XCHALLENGE, BMW G650 XCOUNTRY, BMW G650 XMOTO, BMW G650GS SERTAO, BMW G650GS, BMW K1600GTL, BMW G650 XCOUNTRY
Purchase Repeat
I buy it every time I change Oil.
No BALIetc., it fits perfectly in Bolt and the quality is absolutely fine.
I always buy Single Item, but it is good to be able to buy multiple copies.
View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS, BMW F800GS, BMW F800GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure
Used in S1000RR 2023.
We came across this product because we were told that if we took out the power supply poorly, an error would occur in the CAN BUSSystem.
It was easy to install as it simply slots into the USB power supply located under the Tandem seat.
Cowl removal is also easy.
Although the price is high, it is a good product because it can take out the power supply without the need for any modification.
View detail
![Brake Pad - ROAD [SA] Compound](https://img.webike-cdn.net/catalogue/images/114748/Road-SA_TS.jpg)
Fits: TRIUMPH TIGER1200XRT, TRIUMPH TIGER EXPLORER XRx LOW, TRIUMPH TIGER EXPLORER XR, TRIUMPH TIGER EXPLORER XCA, TRIUMPH TIGER EXPLORER XC, TRIUMPH TIGER EXPLORER XCx, TRIUMPH TIGER EXPLORER XCx, TRIUMPH TIGER EXPLORER XC, MV AGUSTA TURISMO VELOCE 800, DUCATI SCRAMBLER URBAN ENDURO, DUCATI MONSTER 821, APRILIA TUONO V4R APRC, APRILIA TUONO V4 1100 Factory, APRILIA CAPONORD 1200, TRIUMPH TIGER EXPLORER XC, TRIUMPH TIGER EXPLORER, TRIUMPH STREET TRIPLE R LOW, TRIUMPH STREET TRIPLE R, Others BOMBARDIER-CAN AM SPYDER STS, Others BOMBARDIER-CAN AM SPYDER ST STS
Use of RS660 Better than OEM
[How is it used?
Used for city driving, touring, and sports driving.
How was your experience with it?
It is better than OEM, as it works as much as the grip from the initial braking.
How did it compare to other products?
It is cheaper than OEM but works better than OEM and is easy to control.
[Points to note]
None in particular
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
Not listed in the Compatibility List, but can be used for RS660.
View detail
Fits: KTM 690 DUKE, MOTOGUZZI 1400 CALIFORNIA CUSTOM, MOTOGUZZI 1100 CALIFORNIA VINTAGE, MOTOGUZZI V85TT TRAVEL, MOTOGUZZI 1200 STELVIO, MOTOGUZZI V85TT, MOTOGUZZI V7 III ANNIVERSARIO, MOTOGUZZI V7 RACER, MOTOGUZZI V7 III ROUGH, DUCATI 848 STREET FIGHTER, MOTOGUZZI 750 BREVA, MOTOGUZZI 750 NEVADA, MOTOGUZZI V7 III SPECIAL, MOTOGUZZI V7 III STONE, MOTOGUZZI V7 III RACER, MOTOGUZZI V7 III CARBON SHINE, MOTOGUZZI V7 III MILANO, MOTOGUZZI V7 III RACER, YAMAHA XJR1200R, YAMAHA XJR1200
Genuine SBS Dual Carbon Race Pads for KTM 690 DUKE 2012
A friend wanted to try the SBS Dual Carbon Pads on their KTM 690 Duke 2012 model. It appears this bike does tend to go through pads fairly rapidly whilst on track days for obvious reasons. A dual carbon pad would be my first choice for a track bike, but the customer wanted these to try out so they have other options from what they usually buy. Finding the correct part was pretty easy as I visited SBS website and put my model details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. They were nice and clean upon arrival, with no obvious contaminants. I fitted these and the customer took the bike for a short test on teh road. Yes, they do take a little time to bed into the discs but first impressions are positive. I'm sure the customer will be happy and hopefully, they will last a little longer than previous pads. Thanks Webike. View detail
Fits: BMW F 650 GS, BMW F 800 GS Adventure, BMW F 800 GS, BMW F 800 R, BMW F 800 S, BMW F 800 ST, BMW HP 2 Enduro, BMW K 1200 R Sport, BMW K 1200 R, BMW K 1200 S, BMW K 1300 GT, BMW K 1300 R, BMW K 1300 S, BMW R 1200 GS Adventure, BMW R 1200 GS, BMW R 1200 R, BMW R 1200 S, BMW R 1200 ST
Gilles lever set
First of all, it was delivered earlier than expected.
The shipping cost is also cheap, so I highly recommend it.
The packaging was sturdy and arrived without any damage.
There was no problem in assembling according to the vehicle model specified on the website.
I'm happy to buy good stuff at a good price
I am repurchasing or recommending to friends ------------------------------------------- --------------- First, it was delivered faster than the expected schedule, The shipping cost is also cheap, so I highly recommend it. The packaging is strong, so I arrived well without damage. There was no problem with assembly according to the vehicle specified on the homepage. I'm glad that I bought it at a good price Recommended for repurchase or acquaintances Powered by Google Translator
View detail
Fits: HUSABERG FE250e, KTM 250 EXC Racing, BMW F650GS, BMW F700GS, BMW F800GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800S, BMW F800ST, DUCATI GT1000, DUCATI MONSTER797, DUCATI Scrambler CAFE RACER, DUCATI Scrambler CLASSIC, DUCATI Scrambler DESERT SLED, DUCATI Scrambler FULL THROTTLE, DUCATI Scrambler ICON, DUCATI Scrambler MACH, DUCATI Scrambler STREET CLASSIC, DUCATI Sports 1000
Prepare for summer
The 900SS is originally an Engine using No. 8, but we use No. 7 in the winter and No. 8 in the summer.
I tried Iridium plugs No.8, but I couldn't tell the difference, so I chose Standard Plug BP5HA because it is more economical. Iridium plugs seem to be more durable than Standard Plug BP5HA, but Standard Plug BP5HA is enough for me because I have to replace it once every 6 months. I think the Standard Plug BP5HA is sufficient for the cycle of replacing the plugs in half a year.
View detail
Fits: APRILIA 1000 BLUE MARLIN, APRILIA 1200 DORSODURO, APRILIA 650 PEGASO STRADA, APRILIA RS 250, APRILIA RS 250 PISTA, APRILIA RSV1000 MILLE, APRILIA RSV1000 MILLE R, APRILIA RSV1000 MILLE SP/SL FALCO, APRILIA RSV1000 TUONO V4 R, APRILIA SMV 750 DORSODURO, APRILIA SMV 750 DORSODURO FACTORY, BENELLI 666 born in hell 125, BENELLI 899 Trek, BENELLI 900 TORNADO3, BENELLI BN 302, BENELLI BN 600, BENELLI TnT 1100, BENELLI TnT 1130, BENELLI TnT 1130 Trek, BENELLI TnT 1130 Trek Amazonas
Excellent cosmetics, good pad.
[How is it used?
The MOTO GUZZIV7III's front and OEM pads were not very effective due to the single disc, and there were times when it did not stop as expected and I had a near miss.
The OEM has hardly decreased after 24,000 km and seems to be more concerned with durability than effectiveness.
I replaced it hoping for an improvement in efficacy because I didn't know when it would decrease if I waited until it decreased.
How was your experience with it?
Compared to the OEM pad, the pad area is narrower and larger than the OEM pad. I wondered if the pad would be sturdy, but when I beveled the corners with File, it was quite soft, so I ran with high expectations and found that the Rotor worked reasonably well from the start despite being used again.
I did about 450 km of high speed and touring including Winding, and I felt it worked better than OEM.
What I liked more was the Controllability.
OEM will be able to loosen the Brake when entering the Corner. "Scauper." SBS, on the other hand, has a wider control area, making it easier to loosen the brakes in a way that leaves the brakes in place.
When applying the brakes, I feel that I can subtly adjust the brake effect with less force than before.
How did it compare to other products?
I have no non-OEM experience with V7, so this is an OEM comparison, but as I already wrote, I felt that SBS is definitely better in terms of performance.
I expect the durability to be much lower than OEM, but considering the price, I think 10,000 km is sufficient.
[Points to note]
As is often the case with METAL series Pad, when braking Zeeeeeeeee!" and sound.
I also chamfered the pad and applied grease to the piston contact surface, but there was squealing at very low speeds.
The squeaking may stop with time, and if you are concerned about the sound, it may be best to avoid it, although it may depend on the model of car and individual differences.
View detail
Fits: BMW K1600GT SPORT 1600 - All, BMW R900RT 900 - All, BMW R1200GS, BMW R1200GS, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS, BMW R1200GS Adventure, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW R1200GS
KN164Filter
It is much cheaper than OEM filters, does not require special Wrench, can use 17mm boxes, and is easy to manage Torque.
There are no chips on the magnet and it is doing its job, so I think it performs well enough.
View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, HYOSUNG RX 450 SM, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SMR 630, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R
I am satisfied with the product. (Failed in Spring Sale lol) )
Yaay! If you buy in the afternoon on 3/24, 3,198 yen became 2,962 yen with the Spring Sale, or you bought in the morning! (Lol)
I replaced the front brake pads and now it stops when I snap it, so I'm going to replace the rear brake pads with new ones.
Pull the clamping shaft out to the back, pull the old one out to the front and frame the new one….
Hmmm, it won't fit… I have to push the pot in because it's thicker.
Disc Brake Piston Tools
https://www.webike.net/sd/20205012/
Press back against the
I'm not sure if it's time for an overhaul.
But I thought the exchange was over.
It was originally scuffed up with air biting and completely scuffed up. So, I connected DrainPipe and used a syringe type
https://www.webike.net/sd/1647527/
I did air ejection, but the Brake pedal is too skunky and Fluid is not coming out.
I might be able to get a better one with a Small Type Vacuum pump, but it won't be ready today or tomorrow, and I can't be sure.
I can't help myself today, so that's it.
The next day, I went to Red Baron in Asaichi! (Lol)
I'll write the full story in the shoppreview. (Lol)
View detail