Reviews
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 14mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61743_TS.jpg)
Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
Fits: YAMAHA YSR50, YAMAHA TDR50, YAMAHA Axis, YAMAHA JOG Zr, YAMAHA TZR50, YAMAHA TZR250, YAMAHA TZM50, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA RZ125, YAMAHA RZ50, YAMAHA SDR, YAMAHA RD50, YAMAHA GT50, YAMAHA GT80, YAMAHA JOG, KAWASAKI KS-2, YAMAHA BW's, KAWASAKI KS-1
Slightly modified
Used for TW200 (2JL)
The coils were not in good shape during the restoration, so, well, it's an old bike, and I had to replace them.
The compatibility chart said it would work, but to be honest, it wasn't exactly a poncho.
I had to shave the edges of the plastic on the body, shave off the part where the frame meets the plastic, and sweat.
Maybe it's just my TW, but I managed to get it to work.
Performance Quality is fine.
View detail
Nice upgrade from stock wires
Since I upgraded my ignition system during an engine rebuild, I decided to get brand new spark plug wires as well. NGK appears to be the best choice, and the price from this retailer was lower than my local bike parts store. Honestly can't tell or feel a difference between these and the OEM ones,It seems like cold starting is easy. but hey, they're red and they look cool... plus they are backed by NGK, so you know the quality is solid. View detail
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
most parts dont fit
The undercowl fenders do not fit without any custom fabrication, i had to use a dremel to make some parts fit. And one fender peice came with broken plastic. Would NOT recommend. View detail
looks great
Looks great and definitely made my instrument cluster look alot better. Just unfortunate theres no official way to put in the Honda Helix logos into that aftermarket cover. But otherwise looks good View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
It was able to be used without problems
I used it on my FTR223 and had no problem with the size feel. View detail
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
No more foggy display
Ive been wanting to replace my display for years now, i was skeptical about finding a replacement. I couldn't believe i found one on webike. The price was cheap i think i paid more for shipping. I bit the bullet and ordered one and wow in glad i did. Looks and operates just like the original.. it was my first order from webike. I will definitely order for them again View detail
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Centrifugal clutch.
I installed the clutch in my scooter over a year ago. After starting the engine, it turned out that it had quite large radial runout. I was afraid that it would jerk when starting, but I dismantled it and have been driving the Honda for over a year. Last fall, it started jerking a bit when starting the scooter, so I'll have to check it out by spring this year. -------------------------------------------------- -------- I installed the clutch in a scooter over a year ago. After starting the engine, it turned out that it has quite a large radial beating. I was afraid that he would jerk while starting, but I dismantled him and I have been like Honda for over a year. Last fall, it started to jerk a little while starting with a scooter so I will have to check it until spring this year. Powered by Google Translator View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
quite good shape
Mirror was rusted out and replaced with a more recent form.
The navigation is easy to see and the design of the Mirror makes the vehicle feel like it has been exposed.
There is no runout when driving.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
It depends on how you run it.
With my current driving style, I was able to run 10,000 km per millimeter. Last time I installed the same pad, but the distance was half of this time because I was driving mainly on mountain passes and mountain roads. This time I drove mainly in town. View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
for the first time
I bought it because it was an old serow and never changed the code! View detail