Reviews
Fits: KAWASAKI Z 650, KAWASAKI Ninja 650, HONDA CBR650 R, HONDA CBR650 F, HONDA CBR500 R, HONDA CB650 R, HONDA CB650 F, HONDA CB500 F
ArrowBaffle
The volume is not too large, not too small, and the sound is thick. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Good looking!
The OEM filler cap on my CB400SF had deteriorated and was not looking good, so I replaced it.
I purchased this product because the Ditona product was good in terms of Cost. Installation was a simple task of removing and replacing the OEM, but I was a little concerned about the ORing being a little loose, but there are no oil leaks, so I think it is a good idea.
View detail
Easy dress-up
I put it on for dress-up and to reduce hand numbness etc. I could have used Universal Product for just the tank side, but I wanted the SIDE part closer to the frame, so I went with this product. The material is thick and cushiony, and the adhesive surface is super strong. We are planning to go to Long to see the effect of reducing fatigue. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
I am satisfied
Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating.
View detail
Radiator guard
I was impressed by the ease of installation and high precision. As expected of a made-in-Japan product.
The center section has a fine mesh to prevent the front tire from rolling up.
The design is good and it has a custom feel.
I am glad I put it on.
View detail
Fits: HONDA X-ADV, HONDA NC750X, HONDA CBR650F, HONDA CBR650R, HONDA DN-01, HONDA NC750S, HONDA CB400SB, HONDA CB1300SF SP, HONDA VFR1200X, HONDA NM4-02, HONDA NM4-01, HONDA CB400SF, HONDA CBF1000F, HONDA CB650F, HONDA CB650R, HONDA VFR800F, HONDA VFR800X, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
Fine-tuning is now possible.
The lever for adjusting the grip width of U-.KANAYA's billet lever had stuck and was no longer adjustable, so I replaced it with a Dial adjustable ActiveSTFLever. It is foldable, so there will be less damage in the event of a fall. The grip is also comfortable. The Neck is more expensive. It seems that you can buy one set of U-KANAYA Lever for about the same price. View detail
I am satisfied.
The texture is good and the Position is satisfactory.
You can select multiple positions, so you are sure to find one that suits you.
Knurl knurling is fine and grips well.
Instruction ManualFor those who are not familiar with Custom, we recommend that you install it in the Shop because it is difficult to understand.
It would be a little easier to understand if there was at least a Seal on the bag to indicate what part number is in the Instruction Manual.
View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
It was cheap but no problem.
One point of view is good to stand out well. View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
Fits: HONDA Rebel250, HONDA GB350, HONDA GB350S, HONDA 400X, HONDA Rebel500, HONDA CB650R, HONDA CRF1000L, HONDA NT1100, HONDA Rebel1100
For Dress-up
Perfect for a little dress-up
It was easy and quick to install.
View detail
Genuine Brembo Front Pads for Kawasaki Z900
Brembo are a cracking brand when it comes to brake pads. Honestly, they are absolutley awesome. This bike is one of my own and has Brembo retro fitted calipers which does brake heavy and thought I would try the sintered ones first. Finding the correct part was pretty easy as I visited Brembo website and put my caliper details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own Brembo branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are heavily sintered and also have a fairly high heat resistance. Haviong used brembo pads many times before, the fiting is really straight forward and it takes little time to get these bedding in correctly. Very pleased and the bike will be stopping on a penny from now on. View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
PetitCustom
[How is it used?
It has a custom feel.
Was the one you received as per Image?
As you wish.
Was the installation difficult?
It's very easy.
How was your experience with it?
I like it at One point.
[Included Parts:were they on?
Hexagonal Lunch is not enclosed.
[Was there anything that disappointed you?
None
Other items that would be helpful
Remove Oil cap for NORMAL It is easy to install.
I wish it had come with a Wrench, but ….
The first step of the Custom project was the installation of the new system.
View detail
FOR JAPAN MODELManufacturer's goods!
I attached a Chinese inferior product to the Rear Carrier for CB650R of 2023MODEL, and after painstaking drilling etc., it became Garbage with a distorted finish.
I searched for something better and found Endurance's Carrier, which is a mechanism that attaches the Parts to the MotorcycleBody and screws the Body on and off easily and the finish is very good.
View detail