Reviews
Good product
It is carefully made and Fashion. Easy to install. View detail
Fits: HONDA CB650F, HONDA CBR650F, HONDA CBR650R, HONDA CB650R
Eukanaya Lever Exchange
First of all, the appearance can be changed to the color of your choice with Fashion.
I was able to differentiate myself from others.
The feel is better than OEM and it fits my hand very well.
You can ride your Motorcycle with peace of mind.
I was able to replace it easily by myself and I'm glad I bought it.
View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91885_O01_TS.jpg)
Good goods!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Fits: HONDA CB650R
As per Instruction Manual
If you follow the instruction manual, even a novice mechanic should be able to install it. View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100
It was easy to put up.
I was able to remove it from Seat and put it on Cap easily. Now the question is how durable it will be. View detail
[Color] Clear doesn't interfere with Motorcycle Design
It will not interfere with the design of the Motorcycle, and to some extent will reduce the wind blowing against the rider's body. View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
zx4r
It can be installed on zx4r without any problem. View detail
Wiring is Limit...in a way it fits.
This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch.
View detail
decent product
I purchased it to mount on my Monkey 125. This is an item that makes your bike more luxurious.
Also, since it cannot be removed without tools, you can prepare for any unexpected situation.
Although it doesn't stand out that much, it is a dress-up item that makes the bike stand out.
Very satisfied. -------------------------------------------------- -------- I bought it to mount it in Monkey 125. It is an item that makes the bike more luxurious. You can also prepare for the situation because you can't solve it without a tool. It doesn't work like that, but it's a dress-up item that makes the bike stand out. I am very satisfied. Powered by Google Translator
View detail
Fits: HONDA CBR650R, HONDA CBR500R, HONDA CBR400R, HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R
It was applied beautifully.
I have a HondaCB650R 2023 and it was Exactly. I think it was applied beautifully without any bubbles. View detail
Even a beginner could install it easily.
The fit was pleasantly snug.
I was impressed with JAPAN, as expected.
View detail
Replaced from ragged NORMAL
[How is it used?
In use in exchange for OEMFiller cap from SportsCUB
Was the one you received as per Image?
YES, cut-outs are very beautiful, anodized and even.
Was the installation difficult?
Easy to replace with OEM.
How was your experience with it?
No complaints as it's just for looks.
Level gauge becomes unusable and cannot be turned by hand. (You can turn it around if you try hard enough) Although there are some inconveniences such as
[Included Parts:were they on?
O-rings are included, so there is no need to prepare them separately.
[Was there anything that disappointed you?
None in particular
View detail
CODE AxleBolt
Purchased this product because I replaced the front axle with a KOOD one.
The coolness, design, and texture are very good, but the price is rather expensive, which is a little disappointing.
However, only Black is Material:I am concerned about whether the plastic will crack due to deterioration.
Repair Parts would be nice
View detail
Fits: HONDA CBR650R, HONDA CBR500R, HONDA CBR400R, HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R
Good matte feel.
I was looking for a good one to prevent scratches on the meter. I bought this one when I used to ride a CB250R and it was good, so I bought it again because I changed the model of my car. It comes in two types, glare and matte, but I personally prefer matte. (without Gloss) is my preference because it is easy to see with less reflection etc. It is relatively easy to apply because it comes with a tool, but I think there is a hang. It is the same as the protective film for cell phones. View detail
Compared to OEM Product
Used on CB125R JC91 model.
I don't think there is any difference in effectiveness between the OEM and the OEM. On rainy days, it works just as well as OEM. On a rainy day, the OEM does not work unless the brake is applied very early. I don't know about the durability yet, but the aggressiveness of the brake rotor needs to be checked.
View detail
Fits: HONDA CB1000SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA VFR1200X, HONDA VFR800, HONDA VTR1000F, HONDA X-4, HONDA CBR600F4, HONDA CBR600F4I, HONDA CBR650R, HONDA CBR900RR, HONDA VTR, HONDA VFR800F, HONDA VFR800X, HONDA RVF400, HONDA NSR250R, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250
Breaking Fee Ring has been improved.
I replaced OEM Product's Brake lever with this product.
The replacement process was completed in about 10 minutes.
I think it is not so difficult as long as you take care of grease up and tightening torque of the pivot bolt and nut.
The initial goal was Dress-up, but Breaking has improved considerably.
I can't find the right vocabulary, but what can I say, Brake works differently.
Fine tuning of the Brake's effectiveness has become much easier and more reassuring.
The shape of Lever must have been studied.
It was the right choice to replace it.
OEM Product will be kept onboard as Spare in case of emergency.
View detail
Fits: Others , HONDA CB650R, HONDA CB650R, HONDA CB250R, HONDA CB250R, HONDA CB125R, HONDA CB1100 RS, HONDA CB300R, HONDA CB150R
Aero visor hornet 250
I'm using on Honda hornet 250.im satisfied with product.thikness if plastic is good and flexible.There is small shape on top for aerodynamic. When you fix it for specific motorcycle according to that you need to select mount bracket. When it fixed it will closed to the main headlight cowul.I'm happy about product.Recomenderd for motorcycle lovers. View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
Daytona oil cap
I'm used on honda hornet 250.Good look.perfectly fitted to the oil cap thread.There are small holes for water drain top of the cap.if you need open of close need to use alen key as a tool.recomended for bike enthusiast. View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
Good for protection
Installing it is a straightforward process, and it offers superior safeguarding compared to the original equipment manufacturer (OEM). This product is excellent for both tamper protection and customization, and it comes at a reasonable price. View detail
OEMHelmet holder relocated to Handlebar Post
The position of the OEMHelmet holder on the MT-09SP is very difficult to use, and it seems to get scratched by the footpeg and the dirt from the Chain lube, so I bought this Helmet holder to be able to lock it when placed on the Tank! I bought this Helmet holder so that I can lock it when I put it on the tank.
Since the Mirror mounting position would be easy to remove and the switch for the driver's recorder was already installed, we converted it to M10→M8 using the Washer (part number:78032) sold by the company and tightened it together with the Handlebar Post.
Our Handlebar Post is flat, so we were able to install it as is, but if it has an elaborately designed R like an OEM Post, you can install it by inserting an M8 collar that is taller than the protrusion of the R and a large M8 Washer between the Post and Bracket. I think it is possible.
I wanted to use the same key as the car body, so I thought I would need to modify the key cylinder, but it was the same shape as the OEM holder and could be transferred to the included bracket without modification.
The wire in the picture was purchased separately and installed, but it was quite stiff and difficult to use, so we replaced it later with a thin, easy-to-handle, compact one that came with the product.
The actual usability is a little cramped and I am accustomed to turning the key, but I can use it conveniently without having to turn the Dial without increasing the number of keys.
View detail