Wound-resistant DURACON

I used to use a Hook bolt also made by J-TRIP, but after repeated use, the bolt was too heavy.
The scratches on the surface of the wheel have made it look dirty, so we decided to replace it with DURACON, which has been used on Ninja 250R and has a good track record.
It is DURACON, so any scratches are not noticeable. View detail

Genuine DID replacement chain link

As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail

I want to use something a little better.

I haven't used it yet, but it looks like a bit of a good Filter, so I bought it.
Package was changed from the image to a box. View detail

ninja400 2018 Rear Carrier

[How is it used?
Install SeatBack
Was the one you received as per Image?
Street Image
How was your experience with it?
Is good
[Points to note]
It might be better to have someone from Support to do the installation.
How did it compare to other products?
I don't know, I haven't compared.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer View detail

Radiator for protection

The bare Radiator was installed for protection.
I chose that one because I wanted to unify the color with Black, but Large was the right choice.
The only thing left to do is to hope that the cooling performance will not drop. View detail

Brake Pads for Street Riding

I purchased and installed these Brake Pads for my Ninja 250SL for urban driving (commuting). The cost performance is unquestionably good, but it is still a bit expensive. "Red Pad. Compared to the OEM Brake Pads, the Brake Pads are more controllable and cost-effective, so we recommend these Brake Pads to Mainers who drive in the city. View detail

Master cylinder cap

Changed from Green Light to Gold. View detail

Yoshimura rear stand bracket

Item received... material super nice..colour superbe red..install on bike and look super cool.highly recommend..thank you webike.packing was super awsome.my 9th purchase and never disappointing. View detail

For CB250F

.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail

CB250R installed.

I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat. View detail

It's easy

If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail

Purchased due to Headlight Bulb running out

I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.

It's also inexpensive, so it's helpful. View detail

Replaced.

I was going to use it at the time of the last oil change, but I had to give it up because I didn't have Wrench.
It was installed with no problems, and it worked well with the Wrench, but required some hang when removing the Wrench.
Wrench mentioned that the filter can be removed with the M10 Bolt, but this is a Technique that can only be used when removing the filter.
During installation, the M10Bolt could not be used because of a dent in the Center of the installed Filter.
In the end, I had no choice but to remove it by turning it in the direction to loosen it.
Durability and longevity of the effect remains to be seen. View detail

Manufacturer for Peace of Mind

Circuit to change Final
Purchased

Chosen because I wanted to pretend to be Short

Chain slider also needs to be inspected.
It seems to decrease quickly.

It is a secure Brand and I had no problems with the installation.

The first time I removed the OEM's, I had a tremendous amount of difficulty. View detail

Replacement from OEM

Used in Circuit.
It is a Pad that is easy to control.

It is good that it does not decrease too fast.

Dust also depends on the Course, where Brake is used.
There are many, and some are few.

Strong and stable in temperature changes.

I don't run in the rain, so I don't know. View detail

Useful for cold season commuting

[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem. View detail

Used for ZX-4R

I was worried about whether I could attach it to the 4R because I couldn't find any information about it, but I was able to attach it without any problem. View detail

Genuine Kawasaki Tank Pad (3 piece)

I have said this before and this is something every fuel tank should have on them from factory. Fortunately, no scratches to cover on this beautiful tank. No need to tempt fate so I just thought it best bet for now to get a tank pad. This will help stop any scratces and abrasions from the jacket etc. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Kawasaki one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Kawasaki packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. Fitting was straight forward and when on without issue. As this is a 3 piece tank pad, you should really mock up the fitting beforehand so you know where it will sit once you remove the backing. Easy if you take your time. No one wants to have a constant reminder that they messed up with a wonky set. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail

Required for Northeast Number.

The grip is so thin and natural that you don't even notice it has been replaced. View detail

I am very grateful for this season!

My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.

Having said that, I have been able to spend this winter more comfortably than if I had nothing on! View detail