Reviews
We should have done this from the beginning.
I used to use a lever with a parking brake, which is a type of brake that you push into the brake lever.
Screws loose and slipping on hills etc....
I had to re-tighten it each time.
And if you tighten it too much, the Stop-lamp stays on.
Lever fades and rattles, and I'm sick and tired of the inferiority of Chinese products.
I reverted to OEM Brake lever.
I found this product on YouTube, purchased it and installed it.
Installation itself is very easy.
The effect is also Outclassing
Why didn't I buy it sooner?
View detail
The construction is good.
Material:Stainless Steel and well made.
However, I think that about 4,000 yen is appropriate at the highest.
Instruction Manual is also paperless and not included.
View detail
Focus on appearance
If you notice, it's full of zeta.
YOSHIMURA is used.
The product is satisfactory but expensive!
Recommended for those who don't mind the price.
View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
KITACO handle handle
Highly recommended. There are many improvements in the installation area when installing or disabling this product.
Reasonable price, easy to install and good workmanship. Highly recommended. I recommend it for its good quality and easy operation to install on my Monkey 125.
Good quality, good quality, no need to say anything. -------------------------------------------------- -------- Highly recommended. In the installation of this product, it is improved in the parts that can be installed. Reasonable prices, easy installation and good workmanship. Highly recommended. Recommended for quality and easy workability to install in my Monkey 125. Good quality, good quality and no need to say. Powered by Google Translator
View detail
Fits: HONDA FORZA, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA ADV160
Handling becomes lighter.
Running test
Weight of Bar End End 200g→170g." The Handle Ring becomes lighter due to the change of the handlebar's thickness, and the vibration transmitted to the handlebar is not a problem, but it may lack stability for those who often drive at high speeds. However, if you drive a lot at high speed, it may lack stability.
View detail
Fits: HONDA FORZA, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA ADV160
The Shock driver in the instruction manual is not required.
About the product
The texture is very good, but it is smaller than expected. Grip and Bar End Cap A gap opens between the (Total weight:170g/OEM equivalent)
Installation
It's in the instruction manual. Shock driver." is not required.
Utilizing BOXWrench to meet Cap bolt (M6×40) standards. +Bit." and expressed in 10 levels of force, it can be loosened with about 30% of the force.Cap bolt has a Screw lock." A small amount of the "P" is applied and can be installed in about 5 minutes.
About the running test
We will re-submit if we feel a change is warranted.
View detail
For Scooter, it is a necessity.
Installed on ADV160 。 For Scooter, it's a must-have!
You can take your hands off the wheel without worry when waiting at a traffic light with a gradient.
The release is also good for One-touch! Installation is also super easy.
I used half of the Point this time and am disappointed that the price is a little high.
View detail
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
Handlebar Brace and Monitor with DoraReco Monitor
Handlebar Brace and Monitor for the DVR are now installed together.
1.Improved handling with Handlebar Brace
2.De Spray y 5.0Inch." sTent part and Handlebar axis part of the
Mounted on Handlebar Brace due to clearance issues
The running test is yet to be done, but the product's high quality and KITACO products
I have high expectations because of the reliability of the Just to be sure, Parts has a
Glass coat to prevent weathering and monitor fit.
Better.
View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
Very good product
A few days have passed since the installation of the steering wheel brace, so here are my impressions. The parts have a high quality feel and I like them very much. I will comment again on the handling after a few more days of use, since the mileage is still low. Other than that, I have understood a few things. I have also attached the monitor of the driver's recorder to the car, and when I check the monitor, I see that the car is still in the same condition. I checked the monitor. Leaning heavily." I do. Wondering why? I went to check around and ?? the steering wheel brace. "Way off." It was tilted. (Laughs.) Perhaps it was not tightened enough. We immediately retightened and adjusted. Please be careful. View detail
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail
I am very grateful for this season!
My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.
Having said that, I have been able to spend this winter more comfortably than if I had nothing on!
View detail
For the price ….
I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black.
View detail
Don't buy it, it's very bad, it's not good at all, don't buy it, it's bad, don't buy it, the tax is too high, I paid twice the price of what you bought it for, don't buy it.
Do not buy, very bad, not good at all, do not buy, bad, do not buy, tax is too high, I paid twice the price of the price you bought, do not buy --------------------------- ---------------------------- Don't buy it too bad, it's not good at all, don't get it bad, the tax is too high, I paid twice the price you bought. Powered by Google Translator View detail
More than I expected…
I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.
Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.
The bad:Not as hot as expected.
View detail
High quality for the price!
I had to drill holes in the Carrier section Cover, so the installation took about an hour.
I am a novice in maintenance, but the installation went beautifully as shown in the pictures.
Drilling holes is easy if you have the tools and concentration.
As you can see in the photo, the carrier mounting part is exactly the size of a 5-yen coin, so I drilled a hole using a footpeg drill blade in my room until it was the size of a 5-yen coin.
(I drilled the Guide hole with a thin Drill about 5mm before the Footpeg Drill).
This Carrier is very accurately made, and the bolt can be tightened smoothly.
I am loading a Givi 45Liter box.
I tried running with a total of 8 kg JUST with luggage and it was very stable.
Unlike other Carriers, the Box is not too far forward.
Parenthesis is nice and the angle is perfect as it does not seem to put pressure on the back of the tandem player.
I chose this product after struggling with about 6 Carriers.
Large Satisfied
View detail
Simplified parking brake
This kit is for a parking brake kit with a brake lever that can be inserted into the back mirror.
For parking brakeON, grip the Rear brake lever and insert the Knob.
To release the brake, grasp the rear brake lever again, and the Knob will pop out due to the repulsion of the Spring, and the parking will be released.
I think it is effective for parking on a slope with a Scooter without Shift Pedal.
Motorcycle with GEAR, I would put it in low and park on a slope.
The installation itself is simple:just cover the LeftBack Mirror.
This would be a measure to prevent vehicles from starting and tipping over when parking on a slope,
Please think carefully about the situation and do not force the installation.
View detail
On a 2011 CBR600RR.
I bought it because I didn't want to do thick Gloves in the winter.
The installation was done by Webike's Support store with direct shipping.
In the case of the CBR600RR, I gave up on it myself because it is Large strange to remove the FI side of the Accelerator Wire.
I have used it and it heats up so much that it is hot at the strongest Level.
My wish to use thin Gloves in winter was fulfilled as long as I warmed the back side of my hand from time to time.
There is no possibility of mishandling during Blinker operation.
View detail
Fits: HONDA GB350, HONDA FORZA-SI, HONDA PCX160, HONDA ZOOMERX, HONDA GB350S, HONDA PCX125, HONDA MONKEY125, HONDA PCX125 Hybrid, HONDA glom, HONDA PCX125 E:HEV, HONDA PCX150, HONDA DAX125, HONDA Universal(for Φ22.2 Handle), HONDA CT125CT110 HUNTER CUB, HONDA CL250
Mounted on GB350
Purchased because I wanted to install a Quad lock on my HandlebarCenter.
The Instruction Manual stated Torque 27N, but perhaps the Manufacturer specified Torque is 23N?
I took the time to tighten the bolts at 25N.
The color is glossy Black, but I would like to replace it if Matte Black is available.
View detail
I'm satisfied
You can park with Side Stand without worrying about the slope.
Waiting at traffic lights is also easy.
View detail