Reviews
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, Others Φ22.2 for Pipe Handlebar, HONDA glom, HONDA FORZA-SI
For vibration reduction
Easy to install and ideal for groms Size
Price is high but reliable Manufacturer is the deciding factor.
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
DXPlug
Simultaneous replacement with Ignition coil is effective. Acceleration seems to have improved. View detail
Fits: HONDA CBR1000RA, HONDA VFR800FI, HONDA Forza300, HONDA SUPER CUBC125, HONDA VFR800A, HONDA VFR800, HONDA RVT1000R, HONDA NC750XD, HONDA Monkey125, HONDA FORZASi, HONDA NC750X, HONDA GROM, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, HONDA CBR300R, HONDA CBR600RA, HONDA CBR1000RR, HONDA CBR250R
Conscientious price, but quality is not so good
I purchased this product as a replacement for the OEM throttle pipe when replacing the grips on my CL250.
Before installation, we carefully checked the differences with the OEM Product and found the following three differences.
1. no Rib to prevent interference with Switch box
2. with BALI (due to different Material)
3.Pull Side shape is different
1. is Merit for the user. (Or rather, Honda's throttle pipe shape is special.)
When replacing the Grip with an OEM Throttle pipe, this Rib must be shaved off.
This Rib is to prevent the Grip from interfering with the Switch box and making it dull around the Grip.
Must not be pushed in too far when replacing Grip. *
Also, OEM throttle pipes have many warts on the grips to prevent them from turning.
If you replace it with a thin-walled external grips, the wart will be raised.
This product is grooved so that it can be used for external grips while serving as a detent.
I think 2. is due to individual differences, but sometimes BALI is still there.
Check it carefully before installation and handle it properly.
The inside of the Pipe was also covered with small amounts of Garbage, so a simple cleaning was performed before installation.
3. is a little tricky.
This may not be a problem for vehicles other than the CL250.
As shown in the photo, the Pull Side has a different shape, which increases the play of the Throttle.
= Open the Throttle and increase the pullback until the Engine reacts.
In the case of CL250, the switch box and throttle are in one piece.
It is necessary to remove the thailand core of the throttle body at the stage of removing the OEM throttle pipe.
If you are able to replace it, it would be possible to adjust the play of Wire.
The workload is a little more than for other types of vehicles.
(*)
Interference with the Switch box was compensated for with Yamaha's OEM parts WasherPlate.
I think it was RZ system OEM Parts, but I recommend stocking up on them so that there is less worry about what to do.
YamahaOEM Parts:Watsushiya, Plate]
90201-261L1
View detail
Thick and solid product
It is the same size as the Number, so it is not suitable for those who want to dress-up the outer frame of the Number, but I think it is an excellent choice for those who do not want to bend the Number. It is thick and the texture is not bad. View detail
MotoDX Plug LMAR8ADX-9S 94965
I bought the MotoDX Plug LMAR8ADX-9S 94965 to install on my pcx160, the normal plug stopped running after about 3000 km, so I bought the MotoDX Plug LMAR8ADX-9S 94965, the engine starts and runs smoother, the acceleration is also smoother. The engine noise has become quieter and I would like to buy it again. View detail
There are advantages and disadvantages.
Originally, the OEM had a sluggish initial speed, perhaps due to fuel consumption considerations. After the replacement, the response of Axel at the time of transmission is also better, and it is easier to handle for me personally.
However, the reaction was slightly lower fuel economy.
If you want to focus on the feel of the operation, it is Recommendation.
View detail
subtle
I received it and tried to replace it, but I was worried that the pad pin might break off because it was so tight. I thought there might be a problem with the motorcycle body, but the Caliper was already OH'd and I did some chamfering and firring, but it did not improve the problem. I tried chamfering and firring, but it didn't improve the problem. The cause of the problem was the pad, because I didn't see any drag with a Japanese pad of the same thickness. I trusted brembo, the manufacturer, but I was very disappointed because the accuracy of the pad was poor and it was unusable. I had checked the compatibility of the pad before purchasing it, but it was a disappointing result. View detail
Installation Notes
I think this is a good product for those who ride motorcycles "without gloves". Also, when installing it, you have to be careful when inserting it into the lever or it will tear. You may need to hang it a little. View detail
Fits: HONDA CBR1000RA, HONDA VFR800FI, HONDA Forza300, HONDA SUPER CUBC125, HONDA VFR800A, HONDA VFR800, HONDA RVT1000R, HONDA NC750XD, HONDA Monkey125, HONDA FORZASi, HONDA NC750X, HONDA GROM, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, HONDA CBR300R, HONDA CBR600RA, HONDA CBR1000RR, HONDA CBR250R
smooth throttle
I bought Kijima throttle tube to replace the old on my Honda VFR800 VTEC 2003. I use the stock grip on Kijima throttle tube, is very strong, work very light and smooth throttle. View detail
Good. ??
In my case, I could not install other holders because they interfered with the bracket of the driver's license plate, so I found this product, which is the same size as the Plate, and purchased it immediately.
The License Plate is the same size as the License Plate, so if you do not have enough space to install the License Plate, you can use the "Large" Recommendation!
It is a fairly sturdy Plate-type Holder, so you no longer have to worry about bending the License Plate by catching your foot or Cover. ^o^
View detail
Great!
Looks good and works well as a Handlebar Guard
I think it would have been better if the size was a bit larger and windproof effect was added.
View detail