Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Switching from NORMAL
The effect was definitely stronger.
Nevertheless, the Grip force of Tire also has a Quantity:Pair (for Left and Right) The current Pirelli Sport Damon is inferior to the IRC RX-02 when it was the NORMAL Pad.
In other words, I imagine that the combination of RX-02 and this pad works very well.
Other reviewers have written about Fee Rings when reverting Levers, but for someone like me with little skill and experience, I have no idea.
Also, when I apply Brake, I hear a jiggle or some kind of electronic sound.
View detail
The packaging is, sadly,..,
Since Impression was well received, I was excited to purchase this one for myself.
Since I had just replaced the Brake fluid myself not long ago, I also replaced the pad myself.
I have been using Copa Slip to stop squeaking and this time is no different.
The Front of SEROW250 with DAYTONA's HYPERSintered was incredibly scary at first, even on the street, so I set out for a test run with a lot of caution, but it worked there and gradually got better and the break-in period ended after 15 km.
I look forward to Fee Rings at the next and subsequent Tourings.
My only disappointment is the packaging.
Does the Vesrah factory do this kind of packaging?
It arrived in a thin, bag-like Cellophane with a base paper and pad.
Go in, or rather, you can imagine what would happen if you put something that hard and heavy into a Cellophane bag.
The bag was torn, and when I unknowingly took it out of the box, the contents fell down with a thud.
It's hard to believe, but it's true.
And I wanted them to be shipped at least GRUGRU wrapped in plastic wrap,
And if they were put in a box by Webike! I wanted to make sure that measures were taken to prevent the contents from coming out,
If the packaging is this fragile at the time of shipment from Manufacturer, I can only assume that it was torn when it arrived at Webike! I suspect that it was torn when it was delivered to Webike!
Anyway, that makes me feel bad.
There are no scratches on the product and the performance seems Large sturdy.
I would have given it 5 Stars if it ran to some degree and I was satisfied with the Fee Ring, but I gave it 3 Stars due to packaging issues.
View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Thank goodness it's readily available.
I used KIJIMA oil for replacing the oil in my KLX230R. I bought KIJIMA oil because it takes a long time to deliver OEM products and they are often more expensive than the Replacements. I was able to replace the oil without any problems. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
DJEBEL250xc.
Installed on a DJEBEL250xc, cutting off the OEM ignition coil in the middle and connecting it. It is a recommendation to refresh the electrical system. View detail
Genuine R&G Toe Guard for Honda CBR600RR 2010
R&G are a great brand and provide some cracking protection for all models of bikes. They sell a lot for the CBR600RR as these bikes do hit the deck often on track. This toe guard is an essential part when riding on a track as you just do not want your foot or anything in that area in the event of an off. Finding this part number was not too hard as this version does fit a lot of different models and manufacturers. The price from Webike was good value and add with the other items in my basket, I got them all shipped together to save on teh shipping cost. EMS got my order to me in 5 days from shipping. The toe guard is super strong and the bolts that attach this to the swing arm are also really strong. As this is aluminium, it will take a fait bit of hsammer before it gives up the ghost, I know this as I previous;y had one and it took some damage before it eventually snapped. The bolts are threaded really well, the painted finsih is really good and flawless too. Fitted in no time. Very pleased with this and now it will be good to go on the track once again. View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
Installation on xjr1200
I am not sure.
But I feel like I'm getting stronger!
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
First DensoPlug
NGK had always been the supplier, so I replaced it with NGK for a trial.
It is not something that can be felt, but I think the starting performance is good.
We believe that Premium components have an added peace of mind fee that regular products do not have, so those who think they are Waste should not buy them.
I like the fact that Gap management is not required.
View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
Batch!
It's helpful because I don't have to search for part numbers myself. View detail
Fits: HONDA XR400R, HONDA GB500, HONDA FMX650, HONDA XR650, HONDA GB400, HONDA CBX250RS, HONDA CBX250RS, HONDA GB400, HONDA GB400, HONDA GB400, KAWASAKI KX450F, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN
Inexpensive, too.
Oil Filter should be more concerned with regular replacement than choosing Brand.
Oil filters are simple in construction. Unless the filter paper is very poor quality, it is not impossible for the filter paper to filter the oil. Also, unless you use very low quality engine oil, the filter paper will not be clogged by oil sludge.
For vehicles that only lubricate the engine, if high-quality engine oil is used, there is no OilSludge at all even after 20,000 km. As a test, we disassembled an oil filter with 20,000 kilometers and inspected the filter paper. The dirt was so fine that we could not tell which was the back and which was the front.
However, in the case of a motorcycle that is simultaneously lubricated with Mission, even after several thousand kilometers, gold dust accumulates, and the front and back sides of the motorcycle can be seen.
KLX125 has 6000km and I changed Oil Filter at the same time.
The filter we chose was made by KIJIMA. I chose this filter because of its low price and because I trust the KIJIMA brand.
To replace the oil filter cover, remove the three 8mm bolts from the oil filter cover after draining the engine oil.
Even if the engine oil is completely drained, oil will spill when the cover is removed.
After removing the old filter, wipe off the oil well and insert the new filter. Since they do not stick backwards, you should not make a mistake in the direction.
When installing the cover, make sure that the spring of the filter holder is properly attached in place.
It is also important to replace the O-rings, but be careful because Kawasaki OEM O-rings (made in Thailand) are slightly larger in size and often stick out of the groove.
The 8mm mounting Bolt should be tightened gradually to an even etc.
After adding engine oil, cranking the engine, and confirming that there is no oil seepage from the mounting surface of the Cover, the work is complete.
When oil replacement of KLX125 is done in the upright position as per the manual, and the drain is tightened about 5 minutes after oil is removed, the prescribed amount of 900cc (1000cc if oil filter is replaced at the same time) is just right. However, for someone like me, who shakes the car body to remove all the oil, and leaves the car for several hours to allow the oil to drain completely, the specified amount is not enough at all.
The extra 50 to 100cc must be added gradually while watching the Level gauge, until it reaches the middle of the Level gauge.
Also note that the correct way to measure the Level gauge on the KLX125 is with the body upright and all screwed down.
The engine oil of the air-cooled SmallEngine Displacement Volume KLX125 deteriorates about twice as fast as that of the water-cooled NINJA650.
After removing the oil filter, let's disassemble the filter paper part. You can visually check how well the filter is working.
If there is no contamination at all, your Oil Filter replacement Cycle is too short.
The engine oil is Yamaha Premium, and the replacement cycle is 1000 to 1500 km.
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
This is the first time I have chosen DENSO.
I have been using NGK for a long time, but this is the first time I tried DENSO.
The advantage of Iridium plugs is that they do not require Gap Management, so they can be installed right out of the box.
Plugs are consumables, so we were not stingy in replacing them.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
NGK Iridium Spark Plugs for Honda CBX125 1993
A friend wanted an iridium plug for their CBX125 and Webike was the place to get it. This was easy to find using the tools provided by Webike and all the links to the manufacturers websites. They had previously had an iridium installed and wanted to keep to the one they are used to. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The plug arrived in 100% perfect condition. Fired on test and then fitted to the bike. This now makes the bike run as it should and no more bogging down and getting misfires. Very pleased with the result from this plug change. Thank you Webike View detail
Fits: KAWASAKI KLX300, HONDA XR600, HONDA XR500, HONDA XR400, HONDA XR350, HONDA GB400, KAWASAKI KSR110, KAWASAKI KLX250, KAWASAKI KLX125, HONDA XL250, HONDA CRF250L, HONDA CBR250R (MC41), SUZUKI DR-Z110, KAWASAKI ELIMINATOR125, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KLX250, KAWASAKI KLX250R (for competition), KAWASAKI KLX250
Sufficient performance
It is used in CircuitMain with D Tracker bore up to 292?.
I purchased the oil because it is an older model and I am constantly running at high RPMs, so I wanted to improve the oil circulation as much as possible.
I don't think the filtration performance is particularly problematic.
View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
NGK Standard Plug Installed On TW200
I'm currently using NGK DPR7EA PLUG ON MY TW200 AND It's well over the 6000km stiil going strong never had a problem with that. This DPR8EA PLUG LOOK THE SAME AS DPR7EA.THREAD DIAMETER,LENGHT AND 18MM SOCKET WILL FIT. I also wanted to buy DPR7EA Plugs but no luck because out of the stock and I look through the webike found this NGK DPR8EA plug exactly same.I checked the spark plug gap with my feeler gauge it says 0.80mm.According to the tw200 service manual spark plug gap should be between 0.6mm to 0.7mm.So I use my small hammer to decrease the spark plug gap .tap it until meets the correct gap and it won't take more force.Need to be adjusted bend the ground electrode carefully.Installation is so easy .all you need is 18mm spark plug socket to remove the old plug and thread in the spark plug by hand then tighten the spark plug to specification with an 18mm spark plug socket.The Package received very quickly after dispatch from japan took only 4days to reach my home town.Thank you so much webike for the high quality packaging and service.I highly recommended .webike shop is the only one shop you could get parts for reasonable prices.The only place where you can buy products at a much lower price than other shops.I'm giving 5stars View detail
Fits: YAMAHA XV1700, YAMAHA XV1700, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, VICTORY Vision Tour, VICTORY Vegas, VICTORY Vegas Ness Signature, VICTORY Vegas Jackpot, VICTORY Vegas 8-Ball, VICTORY Vegas 8 Ball, VICTORY Ness Cross Country, VICTORY Magnum, VICTORY Kingpin., VICTORY Kingpin 8 Ball, VICTORY Judge., VICTORY Jackpot, VICTORY HighBall, VICTORY hammer
I have no complaints about its effectiveness.
I am a lightweight myself, and I feel that I don't need anything more than this Pad when it comes to effectiveness.
Control is not bad, and when installed on a 41 hp model with a different F suspension setting, I have no complaints about the control just before ABS is activated (when installed on a 38 hp model, I was only dissatisfied with the control in this area).
However, as is the fate of a good pad, it does decrease in a certain amount.
When I used it, I exchanged it within 4000?each time (image).
View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
OEM designation is sufficient
The price is low, so I replace it regularly. View detail