Reviews
Stable KITACO
I used it to replace the main jet on my APRIO4jp5.
The OEM-style chamber and High Speed Pulley were running well, but I had to go out for a short distance on a very cold early morning during the New Year's holiday, even though I usually only travel short distances, and my piston started to hug.
I changed to OEM #72→#76 because I thought the fuel mixture was too low because the auto choke was working properly.
Compared to the original sound, the exhaust sound became more bass-like, and we concluded that it was still slightly thinner.
When the PistonCylinder is eventually damaged, we plan to Bore up the PistonCylinder, so this product will be useful in that case as well.
View detail
Necessary and sufficient.
I bought it for Setting.
4.5gSpec. and measured with a scale calibrated with weights, the error is sufficient to be at mostLarge0.03g.
The Body has the same shape of Both Sides, which does not seem to be oriented to the Body.
Durability is unknown, but I haven't seen any reviews that say it's bad, so I guess it's not a problem.
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
VINOsa-26j
I installed it in VINOsa-26j07.
The Scooter was given to me by a friend, but it was very dirty and the engine was not running.
After removing the six screws from the case, clean the inside of the case, remove the primary and clean it with an air gun, add NORMAL 5g and Weight Roller Grease, and insert the roller in the correct direction for installation! (Some say that Scooter now does not apply Grease to the Weight Roller.)
Primary tightened with 30Nm. (If it is over-tightened, the KRAN will be ruined, and if it is not tight enough, it will come off while driving.)
Also, don't forget the direction of travel for Belt!
View detail
Fits: YAMAHA BJ, YAMAHA BJ, YAMAHA gear, YAMAHA gear, YAMAHA jog, YAMAHA Jog Z, YAMAHA Jog Z, YAMAHA jog, YAMAHA box, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA jog, YAMAHA Super Jog ZR, YAMAHA JOG POCHE, YAMAHA JOG 80, YAMAHA JOG90, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO
Fine
I bought it for a custom variator, sharpened for Yamaha rollers. About 2 times cheaper than the original, let's see how long it lasts. -------------------------------------------------- -------- I bought it on a custom variator, sharpened under the Yamakh videos. About 2 times cheaper than the original, let's see how much it will last. Powered by Google Translator View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
OEM Replacement
Used on SA10J 2-stroke VINO.
2.I used it as an OEM replacement because it was inexpensive when I renewed the drivetrain after about 80,000 km.
I don't know the effect of this Single Body as I have changed other parts as well.
Quantity to Pulley:Set directions were not available.
The manufacturing is not comparable to OEM because of the price difference, but it appears to be solid with no BALI.
I don't know how durable it will be as I will be using it more and more.
The OEM Weight Roller had 28,000 km with only a little variable wear. The body is full normal.
I gave it a 4 star rating because it was a replacement for an OEM replacement consumable item, and I had no problems with it and the manufacturing was solid for the price.
If OEM is too expensive and you are having trouble replacing it, you can try this one.
View detail
Fits: YAMAHA JOG APRIO, YAMAHA Active, YAMAHA Excel, YAMAHA VINO, YAMAHA JOGTrunk 7PS, YAMAHA JOG SPORT80, YAMAHA JOG SPACE INNOVATION, YAMAHA JOG POCHE SPACE INNOVATION, YAMAHA JOG POCHE, YAMAHA JOG C SPACE INNOVATION, YAMAHA JOG 7PS, YAMAHA JOG 6PS, YAMAHA JOG 6.3PS, YAMAHA 5.2-5.8PSCHAMP, YAMAHA 4.5-6PSJOG, SUZUKI RM80, YAMAHA MALIC, YAMAHA MINT, YAMAHA POPGAL, YAMAHA POCKE
Daytona Pads
The site says that it fits on Jog poche, but it did not fit. The diameter of my front pads is 105 mm. On the site 90.5 mm. Plus, after installation, they began to creak as if they were already worn out. View detail
Fits: YAMAHA JOG APRIO, YAMAHA Active, YAMAHA Excel, YAMAHA VINO, YAMAHA JOGTrunk 7PS, YAMAHA JOG SPORT80, YAMAHA JOG SPACE INNOVATION, YAMAHA JOG POCHE SPACE INNOVATION, YAMAHA JOG POCHE, YAMAHA JOG C SPACE INNOVATION, YAMAHA JOG 7PS, YAMAHA JOG 6PS, YAMAHA JOG 6.3PS, YAMAHA 5.2-5.8PSCHAMP, YAMAHA 4.5-6PSJOG, SUZUKI RM80, YAMAHA MALIC, YAMAHA MINT, YAMAHA POPGAL, YAMAHA POCKE
Use with no problem
[How is it used?
I have purchased a new Motorcycle and will be installing a new one.
How was your experience with it?
I don't see any particular problem.
Next time I will buy another one to compare.
How did it compare to other products?
I have not used others in the same Motorcycle so I cannot compare.
[Points to note]
Purchase after confirming car model
View detail
Fits: YAMAHA JOG90, YAMAHA Axis 90, YAMAHA JOG80, YAMAHA JOG-Sports, YAMAHA CHAMP80, YAMAHA Target RS90, YAMAHA Excel, YAMAHA Active, YAMAHA BOXN, YAMAHA JOG, YAMAHA CHAMP, YAMAHA CHAMP RS, YAMAHA SUPER JOG ZR, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO type2, YAMAHA APRIOEX, YAMAHA JOG, YAMAHA JOG-Sports, YAMAHA VINO
High turnover type, my favorite.
Even with the additional weight, the gearshift is still very high rpm. I like it because it is Exactly for my current engine characteristics. View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
perfect fitting!
It was used to restore and refit mufflers I like the perfect fit. The material was good. I want to recommend it. thank you. View detail
Fits: YAMAHA jog, YAMAHA Champ 80, YAMAHA Target, YAMAHA Jog 80, YAMAHA Jog (2 cycle), YAMAHA Champ 80, YAMAHA Target, YAMAHA Jog 80, YAMAHA Jog (2 cycle)
High quality manifold for big carburator
Very usefull for carburator replacement. Old carburator small and difficult to get the replacement parts. Chnge to bigger size with new carburator and use this manifold. Suitable for my Jog 2xx vertical engine. Recommended. View detail
Fits: YAMAHA JOG 80, YAMAHA CHAMP80
Oil seat for replacement
Good reliable oil seal for Jog 2XX. Suitable for replacement the old one. Very good packaging. Really recommended for overhaul purpose. View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS (Bewith), YAMAHA Apprio, YAMAHA Apprio, YAMAHA Apprio, YAMAHA gear, YAMAHA jog, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA jogpochet, YAMAHA jogpochet, YAMAHA jogpochet, YAMAHA Super Jog ZR, YAMAHA vino
0.It's a product for determining RollerSetting in 25g increments.
I was looking for a roller with 0.25g increments to fill a Weight RollerSetting and found this product.
5.0g×3 pieces 4.5g×I was running with 3 Settings, but I wanted to go a little heavier, so I changed 4.5g to 4.75g.
Scooter is fun to use, even with a total 0.75g increase, it changes the way it runs!
Durability has not been tested yet, but it would be great if it doesn't wear out as much as OEM.
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
KIJIMA KIJIMA Air cleaner
Used for NSR50.
Installation is not difficult and easy.
The air cleaner is considerably smaller than the OEM air cleaner, making it easier to maintain.
View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
The shape of the weight roller was different from the picture in the product description.
I checked the Weight roller when it arrived and it was a different shape Weight roller than the picture in the product description.
When I inquired, the answer was that the shape varies depending on the lot.
Oh come on …
Size and weight is not a problem, but… (^_^;)
After all, this is mail order, so I would like to see pictures of the actual product being shipped.
I'm worried about the wear of Pulley side, because this Type is Weight roller without Stopper.
Because there is no Stopper, there is no Setting direction.
Is it for setting confirmation use?
If the Weight roller was the same shape as in the picture, it would have looked different…
I think I will buy NTB or PFP in the future.
View detail
Fits: YAMAHA Active, YAMAHA Active, YAMAHA Active, YAMAHA Active, YAMAHA Active, YAMAHA Active, YAMAHA Active, YAMAHA Active, YAMAHA Excel, YAMAHA Excel, YAMAHA CUTE, YAMAHA CUTE, YAMAHA SALIENT, YAMAHA SALIENT, YAMAHA SALIENT, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle)
It works well.
Vino (5AUA SA10J) I installed this on my 2000.
Last time also replaced with KITACO product, 4 years passed and squeal at breaking occurred. Squeaky noise.
From the play adjustment, I can see that it is decreasing, so I replaced it with a new one.
I pull on the Spring hook to install the Return spring, but it takes a lot of stupidity.
It's easier to get into than the Reinforced Clutch Spring though.
Thanks to KITACO for providing us with 21 years old parts for our old car.
View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
Exhaust gasket
The set includes two pieces, they fit a non-original exhaust pipe, everything matched perfectly with the dimensions. Made from quality materials. -------------------------------------------------- -------- Includes two pieces, no original exhaust pipe approached, everything has matched with dimensions. Made from high-quality materials. Powered by Google Translator View detail
Fits: YAMAHA BWS(BWS), YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA GRAND AXIS, YAMAHA GRAND AXIS, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle)
It's usually good.
The carburetor itself does not have enough room for adjustment, and I wanted more adjustment on the Jet needle side too! View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS (Bewith), YAMAHA Apprio, YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA Vino (2-stroke), YAMAHA Vino (2-stroke), YAMAHA Remote control jog, YAMAHA gear, YAMAHA gear, YAMAHA vino, YAMAHA vino, YAMAHA box, YAMAHA BJ, YAMAHA JOG (FI vehicle), YAMAHA JOG-EX, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA jog
Used in SUPER JOG63cc Bore up
I used it for SUPER JOG63ccBore up
I am riding with Normal mufflerSpec. and the balance of the shifting is just right It is
Perhaps ChamberSpec. is too heavy and acceleration will be slow
This is for people who are tuned in to Emphasis on Torque
View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
exhausting and wasteful
Gasket into Manifold, but obviously the thickness is not enough to prevent exhaust leaks.. With a bad feeling, I installed the gasket and started the engine, but as I expected, there was an exhaust leak I had no choice but to use the OEM gasket and start the engine again I've purchased KN Planning's products several times and was rather relieved, but this Gasket was the worst View detail