Reviews
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Used to install fog on Guard pipe
Material:It's aluminum and fairly thin-walled, so I don't think it's suitable for mounting heavy objects.
It is used to mount a Small Fog Lamp.
22.A 2mm Pipe can be diverted.
I have used the same system in my previous car to install fog lights on the Engine GuardPipe, and I have been using the same system in my new car.
It has been about 2 years in total and no Cracks have occurred.
The Pipe side edge is angled, so it is inevitable that the Pipe will be scratched during mounting and positioning.
It is best to avoid repetition of attaching and detaching, including temporary fixing, as much as possible.
View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, YAMAHA Majesty (MAJESTY), YAMAHA GRAND Axis (GRAND AXIS), YAMAHA GEAR (GEAR), YAMAHA GEAR (GEAR), YAMAHA GEAR (GEAR), YAMAHA GEAR (GEAR), YAMAHA GEAR (GEAR), YAMAHA GEAR (GEAR), YAMAHA DT50LC, YAMAHA BWS (BWS)
It's nice to be able to buy a lot at once.
Currently, there are only 4 KSR series units.
I bought 100 pieces, 23 pieces on the top and bottom, 46 pieces in total, 2 units
Once I've worked on one, if there are any abnormal vehicles among the remaining four, I think I'll have to work on it right away.
It looks so good ---------------------------------------------- ------------ It is now that the KSR series is only four.
I bought it in 100 pieces.
View detail
M12 M10 conversion
Used for converting M12 to M10. View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
To One point around Handlebar
The OEM Adjuster was tasteless looking like faded Black.
It's cheap, easy to install, and it's a great accent around the handlebar.
View detail
Used to install Knuckle guard and Mirror at the same time
[How is it used?
To install the Knuckle guard and Mirror together in a rational way, we used OffsetHolder.
Was the one you received as per Image?
Aluminum Casting and appears to be Black color Painting, not Anodized.
Was the installation difficult?
Technically it's not that difficult, but how many times do you need to change the Handlebar to a Quantity:Pair (for Left and Right) The position was determined by repeatedly making fine adjustments while checking for contact with the Upper Cowl and Screen. In addition to the Offset Holder, an Opposite Thread Screw Adapter (product number:HM-10) from TANAX was used to raise the Offset Holder by 20mm to avoid contact with the Accelerator Wire. For the guard installation, the Knuckle guard bracket was installed from the underside of the OffsetHolder, taking advantage of the long screws in the Mirror Bracket.
How was your experience with it?
We were able to install multiple components together with the Refreshing without any clutter.
[Included Parts:were they on?
M10 Bolt1 pc included.
[Was there anything that disappointed you?
I think it is a little expensive. less than 1000 yen is ideal.
Other items that would be helpful
Mounting points and hang/ All ScrewBolts were coated and tightened with low-strength Screw lock fluid to prevent loosening.
View detail
Repair item for Set Back Holder?
I bought this thinking it was a Spacer for the Bolt of Set Back Holder, but the diameter didn't match and it didn't fit. View detail
Parenthesis is good, it's been updated.
It's up-dated.
Before
The design surface looks like Rubber Print, and the rubber part deteriorates over time.
present
The design surface is made of nylon fiber. I hope the perimeter doesn't break...
Some people say it's to prevent blisters, but in my case, I just wear it because it's good for parenthesis.
It's self-satisfying, but it increases Tension.
View detail
Exactly what I was looking for
Quick shipping, and exactly what I needed. Thank you! I never ordered from this website and was worried about shipping, but I was pleasantly suprised! I will buy from them again! View detail
RAN Bretta V125's No Mirror also allows you to see the back properly.
For some reason, the screw hole for the mirror is too far inward, so I installed it on my RAN Brettta V125, which has a strange design that only shows my elbow, not to mention the OEM mirror, and even the high visibility mirror of DAYTONA.
The result is Large satisfactory. You can see the back properly.
It's also a great way to keep your style intact.
View detail
Nice try, really nice try……
I bought it to keep my stem area tidy, but it may interfere with some models of sports cars with cowls.
I thought it would be very easy to use for bar handle types like StoFire and NAKED.
Since the Reverse side Nut&Washer is Silver, I bought the Black color separately.
View detail
c125 tanax30
I ordered it for the Honda Super Cub mirror extension. Order delivery time took about a week. Delivery time is average. It has not been installed yet, but the quality is good and it seems to go well with my Honda Super Cub. I ordered a gather ~~ I ordered this for my Honda Super Cub mirror extension. Order delivery took about 1 week. Delivery time is average. It has not been installed yet, but the quality is good and I think it will go well with my Honda Super Cub. I ordered only one by mistake, so I ordered another one. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA CT125
SP TAKEGAWA handle bar gurad
i bought a SP TAKEGAWA handle bar gurad I bought it to install GoPro. The installation method was so simple that it was easily installed. When the weather gets better, I am satisfied that I can install a GoPro and ride it. View detail
When I replaced the Mirror, it became difficult to see.
ZrX1200DAEG with Cross 2Mirror
I could only see my arms, so I installed them.
The angle needs to be adjusted, but it's much easier to see.
View detail
For those who are concerned about skimmers.
Dio110 (JF31) The Grip heater removed from the C125 (JA48) It is a little short for
But it would be a shame not to use it, so here it is. (5mm) and installed it.
If there is nothing else, there will be a gap between the Packer and the Spacer, but with this Spacer in between, I don't mind so much.
The hole diameter is adapted to the Throttle side, so the Left Side will be too large to fit. I used glue to attach both sides to the grip before installing.
Material:It's Rubber, so the texture is not uncomfortable.
Like this "A product to make a point." I think it's a very good thing that there are
View detail
Mirror's angle can be adjusted more widely.
The OEM mirrors on my Honda, Grom, and JC92 were difficult to see (and now that it's getting colder and I'm wearing a fuzzy jacket, I'm sweating even more because my body is reflected in the mirrors), so I switched to the Takegawa mirrors. So I installed a Tanax Spacer for height adjustment and this OffsetHolder, hoping for a wider range of Mirror angle adjustment.
With the OEM mirror, my eyes would often get tired, but now that the mirror is higher and my field of vision is wider, I can see behind me better and my eyes are less tired! I'm glad I did it, and I recommend it!
View detail
Fits: KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX, KAWASAKI 1400GTR
For Smartphone Holder
I installed it for the Smartphone Holder, and it is easy to install after removing the Handlebar on the left side, although it is coated with screw lock material, so you need a good tool. The product is very well made and the paint job is fine, I recommend it for USB power supply installation and Smartphone Holder installation. View detail
I need it.
I used it for FCR's Accelerator Wire. View detail
For gaps that bother you
If you're worried about the gap between the Grip and the Switch box, you should be. View detail
Products for Vehicle Inspection
[How is it used?
The Road Trucking Vehicle Law has been amended to require motorcycles manufactured after April 1, 1998 to be equipped with an always-on lighting system. My FZS600 is a reimport, but it is a 2003 model, so this law applies to it. However, the OEM (South Africa Spec.) state allows you to turn off the lights with a switch, so I bought this stopper as a measure against vehicle inspection.
Was the one you received as per Image?
The front side is flat, but the clasp on the reverse side has some kind of complicated shape.
Was the installation difficult?
Remove the screw from the Switch box, split the box up and down a little, and insert the StopperReverse side clasp into the groove on the Switch. The stopper is oriented so that the gentle corner of the front side faces the Right Side of the switch box.
How was your experience with it?
The light switch is now firmly in place.
[Included Parts:were they on?
There was none.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
The mounting point and hang/material are plastic, so you should be careful not to damage the clasp on the reverse side.
View detail
It's easier to see behind me.
I ride a CROSS CUB with OEM Mirror, but when I adjust the direction I want to look in the back, half of my shoulders are depressed. Especially in the winter, it's very squishy... (sweat)
I was confused between this 30mm and 45mm type. I decided to go with the 30mm because I thought the left side would be covered with the head lamp switching switch.:Pair (for Left and Right) Both of them avoided the other parts, and Mirror got the picture just right!
This product is ordered one at a time, so please enter the Quantity:I wish I could get it cheaper at Set...
Bolt's Cap is sold separately. I bought an additional one, but this one is 2 Qty.:2Quantity by mistake in Set:I bought a set (4 pieces)... (sweat)
View detail