It looks delicate but has great cosmetics.

There are several carriers on the market that can be attached to the Rear Fender, but I was not sure if they would be as sturdy as other companies' carriers, but I bought one at a third of the price of other companies' carriers. 。

The instruction manual includes a description of the tightening torque, so there is no confusion about the work itself, but it would have been nice to have a more obvious marker to distinguish the front from the back. 。 When fastening the bolt, a plastic washer is inserted between the Fender and the Carrier, but the washer slips on the curved Fender, so if there were some way to make it easier to insert the plastic washer, the installation would be 5*.

When I actually installed it, it honestly looked more slender than I had expected! 。 The size was as shown in the image, but depending on the angle of view, it seems smaller than it actually is. 。 I added the Carrier to attach a box for camping, etc., but the texture or volume may not be enough for those who value style. 。 If it had been made with 1.5 times thicker steel bars, I would have chosen it without hesitation, even at 1.5 times the price. View detail

Looks sturdy.

As you say, there are gaps.
For now, the gap will be considered later with WaterproofSponge and Vinyl Tape.
However, it sticks out much further back than I had imagined, so the Fender Eliminator was not really worth it.
If you know the structure, it is easier and faster to do the installation if you do it somehow, not according to the Manual.
I am glad to hear that Grab Bar is easier to use than OEM. View detail

Balance of quality and price...

[How is it used?
My friend's younger brother bought a new SEROW250Final edition without a rear carrier. "Let's go buy the parts we want to install!" I went to the Motorcycle Accessories store where I went and bought this Rear Carrier because it was the only one they had in stock.
Was the one you received as per Image?
In hindsight, I could have chosen many things including design etc. if I had chosen at Webike... or rather, my friend and I did. You might as well pick one from Webike's or mail order, right?" I advised him to do so. I want to buy the parts I want and install them right away." and Tension seemed to be higher. I'd rather buy something now than wait a little." I was forced to do it like that.
Rear Carrier functional parts are working fine.
Was the installation difficult?
As mentioned in others' Reviews. Can be used with OEM Assist Grip. In reality, however, the clearance between the Assist Grip and the Carrier Bracket is too narrow to allow for easy access, so modification is required.
In this sense, it is difficult to install, but if you give up the Assist Grip installation, the difficulty will be reduced (the bolt length is also included in the package and is large and strong).
How was your experience with it?
As mentioned above, there is no problem with the functional part as a Rear Carrier, and the box can be installed.
but the Design is It's like a sturdier version of Carrier for Motorcycle." I'm too plain with my...
Moreover, the Gold amount is not one of the cheapest, and to tell you the truth. If I was willing to pay this amount of Gold, I would choose a Carrier from another company with better parenthesis. It's like
[Included Parts:were they on?
The CarrierBody, collar and bolt necessary for installation are included in the package, so if you do not use the Assist Grip, you can install the CarrierBody with this product alone. (If you use the Assist Grip, you will need a collar of appropriate thickness and a longer bolt to accommodate the additional thickness.)
[Was there anything that disappointed you?
Price and Design・・・・It is hard to say how much people like the look of the product, but I think the position of the Assist Grip, which makes it difficult to use if it is attached as it is, is not well thought out for a product that costs this much in gold.
Other items that would be helpful
Point and hang of installation
If the base for the box is to be installed from the beginning, it is better to install the base on the carrier before installing the rear carrier on the car body, so that the work can be done smoothly.
[Availability and clarity of the Instruction Manual
It is an easy-to-understand product.
[Notes]
As I have already mentioned above, there are some points to note when installing the OEMAssist Grip and the Bolt mounting holes are slightly gapped (individual difference range?). It is safer to do a temporary assembly in advance.
[ITEMS TO BUY TOGETHER
If you plan to install the Rear box, it is easier to purchase it together and install the Base first.
[Opinions and requests to Manufacturer
It would be helpful if you could improve the accuracy of the product... or lower the price. View detail

Looks sturdy ??

The instruction manual was well written, and it was installed without any modification.
However, it says to remove the Center cover, but nothing is mentioned in the installation. ?? It can only be installed with it removed. (I don't think it will be installed)
It was a little unkind. View detail

This is a good one

I purchased this product to install Top case.
I have known for a long time that they were highly rated, so I chose one.
Since this is a large component, it is a little more difficult to install by yourself.
The best thing was that it was much easier to handle.
Being a bit old-fashioned, I thought I wanted a paper Instruction Manual, but then I realized it was easier to look at it on my phone. View detail

Nice touch!

Normally, I do not carry a seat bag or a rear box, but I plan to carry a small seat bag only when touring. For this reason, I was looking for a car carrier that looks slimmer than its carrying capacity. It is easy to install, and the bolt holes are not slightly misaligned, which is often the case and makes it difficult to insert the bolt, and the precision of the product seems to be good. Also, when I got stuck in the mountains, the Rear side of the car was hard to grab, but now it is easy to grab the Carrier and swing the Rear side of the car. And it is reasonably priced. View detail

Top case at your own risk.

Installation was easy
It is well made, so I don't think it will break if the load capacity is exceeded.

If you want to attach a seat bag, there is a Loader Hook, so it can be easily secured.
When I try to attach the GIVI Top case as described in the description section, the Base plate cannot be fixed.
The horizontal bar is too thin to fit the fixed bracket and is not reliable, so it may fall off in the worst case. It is necessary to devise some way to attach it.

In the photo, it is temporarily fixed, but we are planning to make a bracket to insert the main pipe.
Manufacturer warranty does not apply, so use at your own risk. View detail

Made by DAYTONA for safety and stability

I bought it because I wanted a stable cargo bed for my camping gear.
In my case, I am wearing the company's Saddle BagSupporter as well, so the included screws were not long enough, so I used the Button capScrewM8 separately. (thickness=8mm) × length=75mm purchased from Screw shop and installed. View detail

Mounted on SA10JVINO?

It was diverted to SA10JVINO!
Quantity to be installed under Seat:The spacing for 2pc Screws can be done without modification!
The problem is the screw mounting on the number, but the mounting angle of the Carrier is different from that of the Screw (the hole position is perfect).
If you are capable of Pipe bending, you can bend that part by machining and install it.
I was not able to process it, so I followed the steps below.

1 Temporarily fix Screw and Carrier on Number
Quantity under 2 Seat:Hook the 2pc bar to the Screw coming out of the Body by force.
3 The rest is forcefully installed by screwing.

That's all for SA10J! However, I don't recommend this because there is a strange tension on the screw part.
I also don't recommend it for those who want to level out the floor.

However, I was able to graduate from the Carrier refugee program in SA10J!
I'm hoping this will allow me to load my Rear trunk ?. View detail

It's solid

It's still solid after installation, no complaints. View detail

Use with Fender Eliminator Kit

[How is it used?
I purchased this product to install GIVI's Top case on my MT-25 which I use for long trips and shopping.
There are many options for carriers, but we chose this product because we wanted to attach a GIVI Case and were a little concerned about the strength of the Grab Bar alone.

Was the one you received as per Image?
Bolt and Bracketetc. were included as shown in the pictures without any shortage.

Was the installation difficult?
It takes considerably longer to install than the Carrier with Grab Bar installation.
There is an installation instruction manual, but the Large section is explained in letters, so it was very difficult to understand MinusPoint.
Also, although the kit is not designed to be used in conjunction with the Fender Eliminator Kit, it was possible to install it in conjunction with DAYTONA's Fender Eliminator Kit at my own risk.
There is no interference with the Blinker, although it is necessary to place a 3mm spacer between this product and the Fender Eliminator Kit.

How was your experience with it?
The Tandem Footpeg and the Fender section are fixed in 6 places in total, so they are fixed quite firm.
It is quite stable, with no interference with the vehicle body or chatter.
It made shopping more convenient.
However, due to the fact that it is fixed with a Tandem Footpeg, KIJIMA's Helmet Holder cannot be used together.

[Included Parts:were they on?
All necessary items other than tools such as mounting Bolt, Nut, Bracket, etc. are included in the package.

[Was there anything that disappointed you?
As I mentioned above, the installation instructions are very confusing.
It is not enough to have a diagram like an assembled piece of furniture, even if it is explained in words....
In addition, the size of the cap to be attached to the bolt on the SIDE was not correct, so it was necessary to file it down to a size that would fit.

【Review】
Firmly fixed to the vehicle body, it makes shopping and other activities very convenient.
The holes were well aligned and there was no need for any special modifications afterward.
I would like to see a little more work done on the instructions, as the product was good. View detail

Good texture! GIVIRear box installation OK

In order to put a GIVI B32NB on a DAX125, I removed the OEM Grab Bar and installed this Carrier.
The grab bar is inserted into the bolt that holds the suspension on the Both Sides and is tightened together, so it can be pulled out by loosening these two bolts.
On the Right Side of the body (Exhaust System side), remove the three red arrows on the top of the Silencer, shift the plastic cover, and loosen the yellow arrow nut (Spanner 17mm) to release the grab bar on the Right Side of the body.
The two bolt locations on the Rear Fender Top Part are located too far back for the Tail Lamp and the Grab Bar to get in the way, so a long Hexagonal Wrench or similar tool would make it easier to work with.
Installation is the reverse of the process of removing the grab bar, and it feels like the cargo bed has been added to the OEM grab bar. （The bolt hole position and other features are indeed made by DAYTONA.
(Made in ThailandParts may have a little gap and accuracy may vary, and may require some manual effort.)
GIVI B32NB was attached to the cargo bed using the included bracket. At any rate, the load capacity has been improved. View detail

Very robust. A bit tricky to install.

I bought this product to install GIVI's Pannier case on my SV650. I chose this product because it seems to have the largest load capacity.
The Pipe is thicker and the installation uses Fender and Tandem Footpeg Bolts, so it feels very sturdy.

As for the installation, it is just a basic Bolt/Nut tightening, but the Bracket collar + Washer to be attached to the Fender section is very difficult to install. I fixed them with instant adhesives.

Also, the application of screw lock is specified, so you need to prepare it. If you don't have it, you can tighten it if it gets loose, but it is dangerous to drop it while driving.

The design also has a Tandem grip for easier handling.
Very good product, only the installation is a little difficult.

Download the Instruction Manual for handling at Endurance's website. View detail

This rear rack is more about the styling

About quality and texture, I can confirm that the quality is great and that the material used is steel tubing and plate with a chrome plated finish. About the feeling of use, This rear rack is more about the styling then the ability to carry loads. The chrome finish is the best choice for this bike and I am yet to even carry anything on it but the area is small and only rated for three kilograms. Products to buy together, To get the most use out of the rear rack if styling is not your solo purpose it would be ideal to add a small tail bag to your cart so the option to carry a small load is always available to you. Difficulty of installation, I can say the fitment of the rear rack was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the rack with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is good. You receive a rear rack perfectly styled for the bike but it is the most expensive small capacity rack available. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail

Takegawa Loads Are Amazing!

I bought one before this with different design, but this one looks wider and could take more loads than usual, Takegawa are known to their quality im sure you'll be happy to get one, thanks Webike and Takegawa ! View detail

Convenient

[How is it used?
Rear boxB27N was attached and used.
There are no functional problems at all.

Was the one you received as per Image?
As per Image
I also liked that the length of the bike made the impression of a motorcycle a little more "large".

Was the installation difficult?
I was able to install and use it myself at the same time I purchased the VTR. It is not difficult at all.
Attaching the GIVIMonokey base is also no problem.

How was your experience with it?
I use it with a box, but it is also convenient for loading without a box.
It is the same height as the Seat, not tiered, and the Carrier is long enough to pack a lot.

[Included Parts:were they on?
Collars (thicker Washers) are included and are interchangeable with OEM collars.

[Was there anything that disappointed you?
There is a Tandem grip part, but it is thin and difficult to hold.
Paint film tends to peel off easily (especially at Bolt attachment points).
It is disappointing to see rust progressing from where the paint has peeled off.

[Opinions and requests to Manufacturer
I would like the Tube in the Tandem grip section to be thicker.
I would like to see the painting improved. View detail

Very good.

I have been a Top case user for many years. I bought a new GSX250R this time and was looking for a rear carrier. I have decided to buy a good rear carrier for my GSX250R because the top case is indispensable for me, and I chose Endurance's one even though it is a little expensive because KIJIMA's one had a bad reputation. The box is a GIVI E43, and I was able to install the Mono-lock base without any problems. The installation is a little bit difficult because the bolt on the back of the Fender is a long one with a special shape, but it is not difficult at all. Personally, I think that I should have done it after replacing the License Plate Light, but if the License Plate Light is a light bulb, it would have gone out in about 2 to 3 years, so I bought an LED light bulb that I do not have to worry about going out. The GSX250R requires the removal of the OEM Fender to replace it, so I have to remove the entire Carrier before I can replace it again. I like my motorcycles with the OEM Fender Eliminator, so I haven't tried the Fender Eliminator, and I don't know if this product will work with the Fender Eliminator. The product is very nice, the pipe is thick and very rigid. I think the Rear Carrier will be used semi-permanently until I get off the motorcycle, so I don't think I will regret buying it. I think the Rear Carrier is a semi-permanent item that you will use until you get off the motorcycle. View detail

Lightweight and beautiful!

When I took it out of the box. "30,000 yen for this? I'm screwed!" I thought
It's squishy and unusually light.
However, when I tried to install it, I found it to be highly accurate and it attaches perfectly. It does not shake at all, even when strongly pulled or tapped.
I actually used it with camping equipment on it and had no problems at all!
Stylish with beautiful welding and painting.
It's a little expensive, but I don't think it will hit you with the Small pattern if you fall, so it will last a long time.
On the contrary, it is not a Body Guard at all.
It is a little expensive, but I am satisfied with Large. View detail

Ready to be pontooned!

A T-type Wrench is required to remove the OEMGrab Bar.

I could not remove it with the Wrench I had at home, so I hurried to Home center to buy one.

It was easy to find an inexpensive one, and once I had it, I could easily pimp it out.

The GIVI box can also be installed with Screw holes Exactly and I am glad I bought this Carrier. View detail

Givi special brackets for Yamaha MT09 Tracer

As we now have the tank bag kit attached to bothe the MT09 Tracer and the MT10. I thought it would be a good idea to get the bracket kit for my wife's MT09 Tracer so she can also have the top box attached too. Never really used this top box on the MT09 Tracer as we didn't have the right brackets. We were sold the wrong ones when we bought the storage boxes. Anyway, after doing some research, I found the dcorrect bracket kit which would mean the MT09 could accommodate the top box. Really easy to find when you go on to Gvi website. Funnily enough, Webike had this kit too at a great price. Why not just get the kit from here, no brainer. I was surprised at how cost effective the shipping was. Mind you, I do always have other items in my basket ready to go to checkout. This meant, the shipping cost, EMS fast service in this case, was really good value. All was delivered successfully in 5 days flat, no messing around with EMS fast. The outer box was taped close which I am happy about as I did not want any of my ordered parts escaping the box during transit. Now bare in mind, this kit box is not small and I was concerned it could damage the other contents of the order. No way, not after Webike warehouse do thier stuff. All the empty space in the box was filled with bubble wrap and all was neatly packed out and no chance of any movement in transit. No dramas there. The kit is really nice, it came with all the instructions you would need, it was not too difficult to understand unlike some intructions I have come across before. After a couple of minor hitches, using the wrong bolt, it eventually went on great. The brackets are nice and sturdy once fitted, the finish of the brackets is pretty good. Hopefully the paint will last a long time. Obviously, this needs to withstand some punishment as it will be open to the UK elements and also the debris from the road surface. All in all, very pleased with this purchase. We both can now pack up our stuff and head out on a few more trips and not have to worry about not having the right equipment with us. It all fits in the storage we now have. Thank you Webike, great job guys View detail