Reviews
Simple
While conforming to safety standards
Small Type and Design is also good.
Fitting is also perfect because of the long upper and lower holes.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
For safety measures
I made a Bracket and installed it for safety and Retro look.
I've only got the rear ones, but I've already bought the front ones and am thinking about installing them.
View detail
Stylish
Installed together with Fender Eliminator.
The simple and slender shape is stylish.
It is for Japanese Vehicle Inspection Correspondence, but it is cool to have it because of its good shape.
View detail
Installed on KLX
Fender Eliminator and Quantity:Set installed
There was no size listed, so I was nervous about the size of the moped, but it was Large and sturdy!
Slim, good looking, Large satisfied!
View detail
Safety Up.
I bought this for my motorcycle and it makes me feel safer at night.:1 Set of 5pcs. can be pasted to the place you want to paste with Tape freely and conveniently. Because it is flexible, it can be used for various things without choosing a place even on a curved surface, and it can be used widely. View detail
It can be attached firmly.
The reflector is not too large and not too small, but it is a good large reflector. I prepared this reflector because it will be needed when I inspect the Clear tail lamp. View detail
On the body, not the Number.
With the Blinker change
More and more Brackets are tightening with Number.
It's thick and unappealing, so I'll use Reflector.
Moved from Number to Fender
Refreshingly better than I expected.
View detail
To the sober trouble of Fender Eliminatorization
I was thinking that the Mud Guard to be attached to the Swing Arm should be large, and I found this!
To the product name. "Reflector &… but it does not have Reflector
To product information 160mm Long. but the product received is "Approx. 145mmLong When it becomes, and it measures actually, the body part is about 180mm, and it is in the instruction manual. Approximately 145mm longer than the mounting surface. (horizontal length because of the angle)
Originally, it was for KIJIMA's Fender Eliminator, but I tightened the Reflector Bolt to the Reverse side of the KTM OEM Plate Holder that was attached to EP's Fender Eliminator. The Reflector was replaced with a KIJIMA one.
I used Double-sided tape because it is not enough to use only Bolt of Reflector, but it is necessary to take measures against vibration.
I think that it would be better if it were a little cheaper.
View detail
It's not too obvious.
The company's Fender Eliminator and License PlateBlinker have been added.
The reason I chose this shape is because it is inconspicuous.
Looking at other people's installation images, you can see that between Reflector and License Plate
There was a gap between the two, so I had to make sure there was no adjustment range to eliminate the gap.
I was worried about it, but it was good that there was a way to adjust up and down on the screw holes for mounting.
The truth is, even if I didn't have this product, I'd still buy Blinker's Plate or
I wish Fender Eliminator had a Space for Reflector.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z750FX, KAWASAKI Z1000 MkII
Sorry. I got the wrong color.
I'm sorry, I got the color wrong.
I just noticed this, but if it hasn't shipped yet, can you exchange it for the Orange color one?
I'm sorry for the delay in shipping. Please do not mind if the shipment is delayed.
View detail
Does its job well
A pretty basic thing but it works as it should. Doesn't vibrate or cause any issues and installation is very straight forward. View detail
The shape is nice Parenthesis.
After all, the SMART shape is very Parenthesis.
I love it
View detail
Very recommended to buy!
After a period of research, I finally chose this reflector from Taiwan KOSO. Compared with the original reflector, this reflector is more beautiful, and the texture is also very good, without the feeling of cheapness. Through simple installation, this reflector adds a unique highlight to my motorcycle! Very recommended to buy! great! ! ---------------------------------------------- After a period of research, I finally chose this reflector from Taiwan KOSO's. Compared to the original reflector, this reflector more beautiful, texture is also very good, there is no cheap feel. By simple installation, this reflector to my motorcycle adds a unique bright spot! Highly recommended purchase! Thumbs up!! Powered by Google Translator View detail
Looks Refreshing
I installed it on my OEM Fender. Originally it was for Active's Fender Eliminator Kit? But the OEM Reflector was not good enough, so I changed to this product. As a result, I'm very happy with the Large Reflector. However, the installation was easy, but it was difficult to remove the OEM reflector. (Sweat) View detail
Refreshing Design!
When I installed Active's Fender Eliminator Kit, I bought this one from Mr. Webig through his actual store because the Reflector is sold separately!
Design is Slim and I like the Large variant!
I always do this when I install the Fender Eliminator Kit...
View detail
The look is unquestionably cool!
I'm using it on my father-in-law's 2017 ToRacer. I wore it on my dTRACKER125 before and it was very cool, so I took the liberty of wearing it on my father-in-law's TRACER900, which has an Active Fender Eliminator. It is still good looking. My father-in-law also liked it. View detail
Fits: Others Medium size car and over (126cc-)
It is not cosy, but it is safe to have.
I bought it on the occasion of converting my '14 MC41 CBR250R late model to Fender Eliminator.
The Fender Eliminator does not come with a reflector, so I chose this one.
I compared and examined with Active's Slim type Reflector of the number co-closing type, but I decided to buy this product also to reinforce the license plate which becomes bare by making it into Fender Eliminator.
The content of the packing is only Reflector of Number base and Paste Type. This price is just this …hmmm ….
But it is light and sturdy, and the texture is good and the anodized is applied beautifully.
As raised in the image, the interval between the Number base and the fixed claw is too narrow and the raised part of the edge of the Number does not enter at all. Moreover, Quantity:Pair (for Left and Right) And.
In case you're wondering, the Number was re-registered late last year and is still a beauty with no freshly made distortions whatsoever.
If I forced it in, the Number was going to be deformed, so I agitated the claws while paying close attention to the anodized peel and looking for the best position where the Number can be fixed and not rattle.
The position of the Reflector can be pasted to the top and bottom because there is room, but I wanted a sense of unity with the Number, so I pasted it to the RLimit of the upper bend part.
Once the position of the Reflector is decided, carefully pull the peeled paper downward while holding the Reflector so that it does not gap.
I installed it with that in mind, and it looks very GOOD.
Up and down Quantity:Pair (for Left and Right) Because both plates are exposed about 1mm more than the License Plate edge, it makes the Number seem to be high class.
Incidentally, for the above reason, Quantity:Pair (for Left and Right) NumberSIDEBlinkerCompact of the Active manufacture which was anxious whether it interfered and could be used together was possible to be used together without interference.
Personally, I'm not dissatisfied with it, but I think it would be more stylish if the Reflector mounting part was the same size as the Reflector. It's a bit expensive.
Well, I think it's unavoidable because I think the Base part is used with other Reflector size products, but…
Also, the aforementioned claw problem. If it is a cheap price, I think it is unavoidable, but if it is this price, I want it to be done properly.
If you're worried about tripping and bending the Number with the Fender Eliminator, buy this one for the Reflector as well!
View detail
No discomfort
Refreshingly, it looks exactly like the Image! View detail
Fits: BMW F650 ST E169, BMW F800 GT K71, BMW F800 R K73, BMW F800 S K71, BMW F800 ST K71, BMW G650 GS R13, BMW G650 GS Sertao R13, BMW K1 K589, BMW K100 K589, BMW K100LT K589, BMW K100RS K589, BMW K100RS K589, BMW K100RT K589, BMW K1100LT K589, BMW K1100RS K589, BMW K1200 GT K41, BMW K1200 LT K589, BMW K1200 R K43, BMW K1200 R Sport K43, BMW K1200 RS K41
Reflector。
The OEM side case is made by BMW OEM.:Pair (for Left and Right) It is easy to be recognized by other cars when driving at night or in the tunnel. View detail
Good thing there's no gap between it and the License Plate!
I bought this reflector because I needed a reflector when I wore a MOTO LEDEDGEHolder. reflector has various shapes, but I chose Fender Eliminator. I chose this shape. It is Refreshing as I aimed! View detail