Reviews
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic, YAMAHA DRAGSTAR1100
I love it!
It is larger than OEMHorn and the plating shines brightly, making it stand out considerably. The sound is generally the same as OEMHorn.
The Engine Guard of my dsc400 is bumping against the Bracket, so I installed it simply with Home center, no problem at all.
I like the Large change.
View detail
nice sound
It sounded solid and good. I think the other party can hear it. View detail
PIAA Sports Horn
The Horn has a large volume and impact that does not match the vehicle's size.
The effect is so Large that people turn around.
View detail
I rarely ring it.
I bought these because the Horns on my Harley and Shovel were too lazy. This one has a loud sound that is not quite right for me, but it is loud and easy to hear, and I think it will do its job well for its intended use. The weight is lighter and smaller than the Shovel, and the heavy Bracket that came with the Shovel has been replaced by the included Refreshing Bracket, which also refreshes the inside of the Nacelles. View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
horn
About quality and texture It's chrome, so it's neat and simple About the feeling of use The sound is moderate Products to buy together be not in Difficulty of installation It's not easy. It's very different from the standard Cost performance and comparison with other products The cost is very attractive About shipping and packaging It took a week and the packaging was great Any concerns, cautions, or advice when purchasing If you try to install it in the APE100 horn seat, it doesn't fit. You need to find the seat, and you need to reattach the wire View detail
Fits: HONDA Broad (BROAD), HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA CB400 Four (Four-), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR)
Horn normal in a good way.
Replaced because it was rusted and no longer useful.
It's compatible and Universal, but it's also very practical because it sounds decent.
It's not expensive, so it's helpful.
good point
It is easy to install.
It is also safe because it has a decent sound and Large size.
A bad point
It may be easy to rust.
Horn is not something that is rarely sounded, but when it comes time to use it, you don't want it to not work, so it is better to Check it.
View detail
I was looking for a Horn to fit my old car.
The sound is cheap, but I like the look of it, so I'm glad I bought it. The sound is reasonable for the price, so if you think it's like a moped Horn, you won't regret buying it. View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
SP TAKEGAWA Chromium Plating Horn
After searching the web, I found Webike offering genuine Honda parts at realistic prices. Excellent service. Wish I'd found them sooner! Webike offer parts for other makes too, at decent prices, so I'll be letting other riders know about them. Decent delivery costs and time from Japan makes a huge difference to keep projects running! View detail
Good!
Thank you for always delivering good products safely and quickly. It's a good product. It's easy to install and the delivery is safe View detail
Is good
Since it is a standard AlphaHorn, the tone echoes EuropeanSound.
It sounds far better than NORMAL.
It is not too large and can be placed anywhere.
View detail
It is well made and painted, and has a nice tone.
This product is well made and painted, and has a good tone. It's also inexpensive and easy to dress-up! View detail
Good for custom beginners.
The bracket itself is soft and easy to install.
Since it is a single note, it does not sound as thick as DoubleHorn, but it is better than the stale sound of NORMAL because of its lingering effect.
The lid on the Horn outlet also seems to be working well, and no mud seems to have penetrated to the inside of the Horn in the many times I have driven in the rain (at a Level where the inside of the cowl gets dirty).
As for the strong visual assertiveness of NAKED, if it is a Full Cowl, it will be hidden from view, so there is no need to be conscious of it. In the case of NAKED, the label can be removed if necessary.
In terms of price and difficulty, this product is suitable for beginners who want to try their hand at a variety of things.
Remove the NORMAL
replace a terminal
Install with ingenuity
This is a great way to experience the basic operations of Custom, so why not try it out for a start?
View detail
NORMALSR has a Large change in installation
I installed it for the purpose of replacing the OEM Product, but the Large was odd.
The supplied bracket was too short and could not be installed without removing the headlight, so we reused a bracket from an OEM product.
I had a hard time getting to the Reverse side of Light.
Incidentally, the OEM Product that was removed was also a NIKKO product. This product is also made by NIKKO, a long-established HornManufacturer in Japan, so there are no quality problems.
The sound is lower than OEM, but not bothersome at all.
I saw in some post that Plating is prone to rust, so I took measures with 6-66 Rust-Proof Spray.
I can't complain because it is a Universal Product, but be careful when installing on SRNORMAL vehicles.
View detail
Installation is Large-Format
Replaced with OEM Product.
I did not remove the Headlight and it was Large strange.
The bracket that came with the product was too short to fit in my hands, so I removed and reused the bracket from the OEM product and somehow managed to install it.
I am satisfied with the appearance.
Incidentally, the OEM Product was also made by NIKKO, and this product is also made by NIKKO, a long-established Horn manufacturer in Japan, so there is no doubt about its quality.
The sound is lower-pitched than OEM, but I don't mind.
I can't complain because it is a Universal Product, but be careful when installing on SR NORMAL cars.
View detail
Fits: Others for 12V * Attached bracket can be removed for use
It is an ordinary Horn.
Temporary regal need to purchase.
Large and heavy, but it's cheap so it can't be helped.
It does not fit in the light cowl and I am considering where to install it.
View detail
Small but very good guy.
[How is it used?
One week after installation.
Was the one you received as per Image?
I thought Image was the same size as OEMHorn, but I was glad that it was about one size more compact.
I am not sure if it can produce the nominal sound pressure of 110? (Lol)
How was your experience with it?
The car failed inspection due to insufficient Horn volume at the time of inspection. The Horn was replaced by an OEM product.
If it is an exchange with OEM Horn, the attached Harness is not necessary and can be connected to the power supply as it is, and although it is a Small Type against OEM Product, it has a Large volume and passed the inspection safely. The price was reasonable, so it is highly evaluated that we were able to achieve our goal at this cost.
The OEMHorn was used for about 11 years and passed away, but we would like to test the Small TypeHorn to see how long it can be used in the future.
[Points to note]
My ZrX1200 DAEG has a Horn that was originally installed under the Stem, but has been moved to the Cowl. Therefore, I also made the bracket for mounting the Horn by myself. This is the point of this project, but the Instruction Manual says not to turn the screws, not to remove the bracket, not to rotate it, and not to tamper with it in any way. I understood that the screws were for volume control and should not be tampered with, but I thought that the restriction on the bracket was too large. First, I connected the power supply to Horn and checked the sound, and confirmed that the volume was perfect. Next, I removed the bracket from the Horn and replaced it with a bracket of my own making. After that, I installed it on the car body and checked the sound. (Lol)
The cause was a home-made bracket that was too rigid. It seems that the structure of the bracket is designed to excite vibration and make the sound large. It was a good learning experience for me to realize the unexpectedly delicate mechanism of the Horn.
How did it compare to other products?
We chose the Mistuba Sankowa product after considering the quality and cost.
View detail
sound good
Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. We recommend this product to those who love and like bikes. Reliable product, fast delivery, I am very satisfied with the result. I am very satisfied. I will order again and trust. Thank you. I love you. I will order today. Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. For those of you who love and love bikes, Now I recommend this product. Reliable product, fast delivery, very satisfactory results I like it very much I will order again and trust thank you Love it I'm taking orders today View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
Chromium PlatingHorn
I used it on a 6V GORILLA that I converted to 12V. The plating is high quality and the sound is not cheap, so I am glad I bought it. View detail
Replaced with Plating Horn
The price is reasonable and the Plating quality and sound quality is good.
To the Horn Bracket attached to the Emblem Bracket of Mukawa
I was able to install it.
If you use the Wiring of MONKEY125 as it is
The drainage hole has been turned sideways on both sides.
I don't ride in the rain, so we'll see how this goes.
It's a modest dress-up, but it's highly satisfying.
View detail
Compact to improve volume and sound quality
I was thinking of replacing the OEMHorn as it sounds poor.
I wasn't sure if I should go with DoubleHorn.
The lack of room for mounting space and
It was a bit pricey from the posts of those who purchased it.
As a Manufacturer, we have confidence in our products, and the sound quality is excellent at 400Hz, 500Hz, and
Three types of 600Hz can be selected, and Cover is included for
I chose the Single Body by piaaSports Horn.
To install the Body, remove the OEMHorn and
I just had to replace it.
Wiring is a special type of OEMHorn Plug.
I bought a Denali Electronics Connection Plug.
It was easy to connect.
I haven't compared them, but my feeling is that
I think it is right to install 500Hz.
View detail