Reviews
Installation is devised, the sound is Spartan
The aged deterioration and poor sound of OEMHorn are motives of exchange.
I was prepared for inevitable innovation from the shape and large size. Parts arrived and we planned to devise an installation at the same place as OEMHorn. OEMHorn's Harness is as it is as a prerequisite. For the time being, we temporarily installed Bracket, Cowl and Meter Bracketetc. , Handlebar as Quantity : Pair (for Left and Right) Bracket was processed and book grouped at a position not interfering even if it cuts all the way. I can see a bit from Upper Cowl, I am the best position on my own.
I do not say the best tone.
View detail
It is a good sound.
NORMAL 's Horn replied, I thought, a little Horn. 500 MHz is quite a good sound.
For installation, remove one Hexagon Bolt and install only. It can be done in about 10 minutes.
FJR's NORMAL place is Tire house (?) It was inconspicuous in inside, it looked like an OEM attached from the beginning, it was a correct answer by purchasing it.
View detail
It is my favorite sound.
NORMAL was like a nose chewing sound, and the volume was small and it seemed to be choppy, so I tried changing it taking safety into consideration.
I think the sound is Large and sound quality is good.
It may not fit the old car a little, but I am satisfied.
View detail
It also sounds with Compact
It fitted well in a very narrow place of BANDIT 250.
Normal out of the missing sound of Ma!
Even if you run a horn, I do not feel embarrassed.
Car also noticed Safety also UP ↑ (^-^)
OK, remove the OEMHorn and pull the cord a bit!
Bracket Included Parts : Bending and fitting.
View detail
Fits: Others for 12V * Attached bracket can be removed for use
Large kimono may be different depending on the time?
【What made you decide the purchase?】 Low price
【How was it actually used?】 It is a better impression than I thought.
【Was it difficult to install? (Hard parts case)】 None.
【Please tell me the point of installation and hang (in the case of Hard parts)】 NORMAL's CUB (Iron CUB) Earth the Minus on the car body if you attach it to.
[Is there anything I was disappointed about?] None
【Hope for Manufacturer - Please tell me if you have any improvement points】 PetitPetit is too delicate so let's make it a bit thicker ...
【Have you compared items?】 Hirochee Horn, OEMHorn
[Others]
CUB 90 Switch to Other Company Product (CEVReplica) We purchased it as necessary for replacing. Simply
I decided by the price.
In case of CUB, Horn is ON-OFF controlled with Plus Rare Spec. Because of the outside switch
Then Horn stops working. I would like to control it with Minus, but if the Minus terminal is
It's a bit difficult as it has been carelessly Body ground without it.
So, Plus and Minus' Wiring are firmly equipped Horn is new and necessary
That's it..
Aside, Horn itself is very textured and the volume is sufficient. Although it is inexpensive, the thing itself is pretty good.
Bracket's Length is as shown, but as you can see the Lornness of Horn Body is a little Small.
Manufacturer's notation is 70 mm, but the actual product is only 66 mm. The markings are also quite different.
Large may differ depending on shipping time.
There is no problem in operation itself, so it is better for Small to be better than for Large, so there is no problem personally.
I think that it will be GOOD shopping if you pay attention only to the point of Large.
View detail
Self-assertion is amazing! (Lol)
Walking with a smash hoarding Shit cricket purchased for repelling
"Pea" It sounds like a sound is not it (Lol)
Also, the traffic situation of Nagoya where I live is not good - - - (~_~;)
I think that the installation position is different depending on the model,
Installation of the Z750R in the NORMAL position is unexpected, difficult (Lol)
It may not be helpful because there are few people riding such a rare Motorcycle
Assertiveness is intense when it is NORMAL position.
I dared to put that position - - -
In the case of Full Lock & Full Bottom, it seems to interfere with the front wheels
There will not be such a situation first (LOL)
I feel that Bracket's Plate is somewhat thin
It seems better to check Check Mame.
Oh, I forgot (~_~;)
There is no problem for the sound of the sound.
It is a substitute that can be used about 10 times NORMAL (^_-) - ☆
View detail
Excellent Classical atmosphere!
I installed it in the W650. First of all I like Classical looks. There is also firm presence. It is unexpectedly higher than this Horn if you are investigating other Classical Mirror in various ways. Made in Taiwan's common cheap Horn will only look something like that. In other words, I think that Horn from posh here is expensive for a moment, but I think that it is satisfactory when considering the appearance and COSPA.
The performance of Horn is also quite nice!
View detail
I will interfere with poning.
Since it interferes with Front fender in poning, process Bracket, remove rain shears and install.
Sound sounds like a trumpet sound, I do not like it much, but better than OEM.
View detail
CB600F HORNET 07 PC41
I installed it in CB 600 F HORNET PC 41.
If it is a mounting position of NORMAL, it will protrude
It is a place to worry, I'm waiting for the time being.
The sound is good!
View detail
GSR250 Mistuba ALPHAII
【Why did you exchange Horn?】
In Indonesia, there are many motorcycles in rabbit, lane change is not polite like in Japan. I thought that installation of Horn which is conspicuous also to inform the opponent of my whereabouts is an urgent thought I exchanged from OEM to Mistuba.
【Why did you choose MistubaHorn】
Previously, because I was using cars and I liked the sounds themselves.
There is no elongation of the scale as young people DQN is ringing, which is fun ~ ♪, it is a short and powerful Simple sound with fans!.
Mistuba Sancoa's HP http : / / www. mskw. co. jp / car / car-horn / mbw-2e17
There is also a Sample sound, but actually it is more bass sound.
And there is only Manufacturer which is also adopted for OEMHorn and reliability is outstanding. I will replace my car or Motorcycle before Horn is broken (^^;)
[About installation]
In the case of GSR 250, OEMHorn's fixed Bolt (10mm) Just pulling out the flat terminal of Plus minus and replacing Mistuba's Horn in the same way completes the replacement itself.
However, in this method, water will accumulate in the flat terminal Cover, so it is better to slightly extend Wiring and turn the Elbow side of the flat terminal Cover downward.
There is a note in the Instruction Manual, but I should not loosen the fixed Bolt of Horn and Bracket. Depending on the type of car, you may wish I could change the installation angle of Bracket for a bit more.
【Impression after installation】
I did not feel that it was such a big loud sound as it was in a car because it was in the car, but with Motorcycle 1. I feel it sounds like Large about 5 times. I think that it was not heard much by car people if it was an OEM's Horn, but I think that this would make Appeal sufficient existence. The appearance may be inconspicuous because the OEM 's Manamaru BlackHorn is integrated with Motorcycle.
In areas and environments where it is necessary to sound Horn it was sufficiently meaningful.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
A bit sorry - - -
It was just a good product such as price and Large Kimono, but the item that arrived was long-term stock or was dirty.
Because I did not want to install it dirty, it wiped lightly with a dry cloth. Polo Polo and Plating come off Peeling off.
Besides, because my friend asked me the same item, Quantity : 2pc. Buy and buy Quantity : 2pc. Plating is dirty as well as Set - - -
It is surprising that there are such products in this era.
View detail
Though I rarely use the horn, I ordered through web to adjust my order amount to make its shipment cost free.I chose the trusted PIAA Sports Horn.I checked the frequency with YouTube many times, and selected 500Hz.I installed it on
Though I rarely use the horn, I ordered through web to adjust my order amount to make its shipment cost free.
I chose the trusted PIAA Sports Horn.
I checked the frequency with YouTube many times, and selected 500Hz.
I installed it on KAWASAKI Z800.
Fortunately, the terminal form (flat 2-terminal type) of the OEM horn was the same as this one, and I was able to install it without extra processing. (Still, the terminal orientation of this horn differed, and I needed to reach out for the harness for it was a little too short.)
Its high beeping sound has now changed to a more deeper sound, and I'm happy with it!
I have an OVER engine slider on my motorcycle. And as you can see, I had to install the horn to a place very close to the exhaust pipe, for the clearance between the slider bracket and exhaust pipe was too little. I had to make sure that it didn't touch the bracket.
I am a bit worried about melting due to heat, for the horn body is made of resin.
Since it has a dust cover, I'm counting on its durability.
View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
The horn looks like the stock one, but chrome finish makes it resonable. The sound is very weak, but this is still a moped horn. Also it's better not to touch the tuning screw.
The horn looks like the stock one, but chrome finish makes it resonable. The sound is very weak, but this is still a moped horn. Also it's better not to touch the tuning screw. View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
The Brand called SP Mukawa became the first conclusive factor.Although the phon itself looks poor, sound volume and tone quality are satisfied.Moreover, since it is a Chromeplating, it is very a Beauty.
The Brand called SP Mukawa became the first conclusive factor.Although the phon itself looks poor, sound volume and tone quality are satisfied.Moreover, since it is a Chromeplating, it is very a Beauty. View detail
The Stay remained as it was, and when only the horn body tended to exchange, its die length of the screw thread was too short [ the original manufacturer's product rusted, and ] to attach. If it is general-purpose article, I will think that i
The Stay remained as it was, and when only the
horn body tended to exchange, its die length of the
screw thread was too short [ the original manufacturer's product rusted, and ] to attach.
If it is
general-purpose article, I will think that it may be a little longer.
I want you to also indicate the
Size in detail.
View detail
Although the pure phon was attached to the Motorcycle for work until now, since the other day quite dangerous car jumped out and it felt dangerous, it changed for this phon. Since a louder sound than the original manufacturer's product becomes, and I
Although the pure phon was attached to the Motorcycle for work until now, since the other day quite dangerous car jumped out and it felt dangerous, it changed for this phon.
Since a louder sound than the
original manufacturer's product becomes, and I have to have a too dangerous car noticed somewhat, I attach this product and think that it was good.
It was serious that
attachment decided on the place which fixes a main part, and the wiring itself was easy work.
Attachment was completed by the work of about about 1 hour.
please turn the opening of the
phon downward and attach it -- since rain enters and it is crushed, shortly after turning upwards.
View detail
Fits: HONDA MONKEY, HONDA CL50, HONDA REBEL250, HONDA ADV160, HONDA ADV150, SUZUKI Gixxer, HONDA GROM, HONDA MSX GROM, HONDA SUPER CUB110, HONDA Ape100, HONDA Ape50, HONDA LITTLE CUB, HONDA DAX50, HONDA GORILLA, HONDA Benly50, HONDA CD50, HONDA MAGNA50, HONDA MONKEY, HONDA CL250
[Webike Monitor] Although a few was expected from the sound of the phon, it is the same tone that it is pure.Since an authentic positive one was black, it differs in a color from this phon, but it is very beautiful.Although there was a tone relation w
[Webike Monitor] Although a few was expected from the sound of the
phon, it is the same tone that it is pure.Since an authentic positive one was black, it differs in a color from this phon, but it is very beautiful.Although there was a tone relation with vehicles, it was dressed up at its own car of mine.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Since there was only one phon in one of the two, it purchased. If a little attachment is knowledgeable, it can be done simply. Since there is also sound volume as it is, I think that the driver of a car also fully hears. Since Plating processing is car
Since there was only one phon in one of the two, it purchased. If a little attachment is knowledgeable, it can be done simply. Since there is also sound volume as it is, I think that the driver of a car also fully hears. Since Plating processing is carried out, I also think whether to be dressed up. View detail
[Webike Monitor] It is although attachment is satisfactory... It is past price [ this ] quantity.
[Webike Monitor] It is although
attachment is satisfactory... It is past price [ this ] quantity.
View detail
Since the pure phon stopped sounding, it purchased. sound is too small. and strange sound which has not been heard until now. It was shameful and removed immediately. He spared as since it is a portion seldom used, and it lost.
Since the pure phon stopped sounding, it purchased.
sound is too small.
and strange sound which has not been heard until now.
It was shameful and removed immediately.
He spared as since it is a portion seldom used, and it lost.
View detail