Reviews
Fits: KAWASAKI VN800, KAWASAKI VN800 Classic, PIAGGIO Liberty 125, YAMAHA TMAX, APRILIA Pegaso 650 Strada, APRILIA Pegaso 650 Strada TRAIL, APRILIA Pegaso 650 Strada TRAIL Factory, DERBI Murasen 659, ITALJET Torpedo 125, KAWASAKI Epsilon 150, KAWASAKI Eliminator 125, KAWASAKI Balkan, KAWASAKI Vulcan 400 Classic, KAWASAKI Vulcan 400 Drifter, KAWASAKI Vulcan 800, KAWASAKI Vulcan 800 Classic, KAWASAKI Vulcan 800 Drifter, KAWASAKI Vulcan II, PGO G-MAX125, PGO G-MAX200
This is it.
I have also tried Windshield IRIDIUM, but nothing has changed in terms of starting, fuel economy, power, longevity, etc.
Does this mean that this Standard Plug BP5HA is comparable in performance to Windshield IRIDIUM?
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400SE, KAWASAKI ELIMINATOR 400LX, KAWASAKI ELIMINATOR 400, KAWASAKI EN400 TWIN, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI 1400GTR, SUZUKI DL650 V-STROM, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1050, SUZUKI V-STROM1050XT, YAMAHA DSC400, YAMAHA DS400, YAMAHA TDM900A, YAMAHA TDM900, YAMAHA DSC1100
It can be managed with Pannier.
The lower half of the Rear tire is shown in full Pannier condition.
However, that is not an option.
It fits perfectly without anything, and as for the Front section, it can be covered perfectly.
The quality is perfect, and if it lasts two years, that's good enough for me.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250, YAMAHA DIVERSION600, YAMAHA DIVERSION400, YAMAHA XZ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ750D, YAMAHA XJ650
Excellent for Cost performance
[How is it used?
It is used as Exhaust Gasket on XJR400R.
We are replacing the oil filter every 6000km, but because it is an external full exhaust system, the exhaust pipe must be removed when replacing the filter, and the exhaust gasket must be replaced.
Up to now, YAMAHAOEM Product500 yen/piece×4 pieces would be 2000 yen, so it was quite an expense, but this product is Quantity:2pc. I purchased the set for 450 yen, which is a very reasonable price, and I thought it was a KITACO product, which is a famous manufacturer, so I could be sure of its safety.
How was your experience with it?
The product itself is OEM Product and little manufacturing method (Material) seems to be different.
Is this a problem since they are about the same thickness, I've been using Liquid Gasket in conjunction with it and so far no disposal leaks and I'm happy with it.
I am a little concerned about the next time I replace it because other reviews said that it was very sticky when removing it.
How did it compare to other products?
Anyway, I think the price is excellent.
There are also several Other Brand Products, but their prices are not that different from OEM products, so it is safer to buy OEM products.
[Points to note]
I have to install the exhaust pipe after attaching the Exhaust Gasket, but it falls off at a high rate.
If you do this, you will pick up sand on the ground and it will be a hassle to wipe it off again. It is a good idea to apply oil or Liquid Gasket to the backside of the device to prevent this problem.
Other items that would be helpful
Opinions and requests to Manufacturer:Quantity:I would appreciate it if you could offer a cheaper version in 1 Set of 4pcs.
View detail
Plating gives it a luxurious look!
[How is it used?
The Normal master cover is black and tasteless, so I purchased it for dress-up purposes.
Was the one you received as per Image?
I am satisfied with the quality and very beautiful workmanship.
Was the installation difficult?
ScrewQuantity:Easy installation by simply replacing the NORMAL with 2pcs.
How was your experience with it?
Beauty. It makes driving fun.
[Included Parts:were they on?
ScrewQuantity:Comes with 2pc.
[Was there anything that disappointed you?
I think the price is a bit pricey.
▼It is likely to be Universal as it is an integrated MASTER Cover of Nisshin.
View detail
![[STD Lever] Brake Master Cylinder Kit [Horizontal Type 14mm/Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61759_TS.jpg)
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
Installed with the installation of KITACOOpposite Caliper on MT03
Caliper replacement for MT03 due to insufficient capacity of Master Cylinder
We were able to transmit braking force firmly.
However, the OEM handlebar is too tight to handle the hose, so it may be better to replace the handlebar as well.
View detail
Fits: YAMAHA NMAX 155, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY, YAMAHA MAJESTY
Very easy to use
My motorcycle is YAMAHA XMAX300. The cold winter is coming. In this season, no matter how thick gloves you wear, you will feel cold in your fingers. I saw this YAMAHA original heating handle on webike. This handle is suitable for various models of Yamaha and is equipped with the original power interface. It is a little troublesome to install and need to remove many covering parts on the motorcycle. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-07, YAMAHA YZF-R25
useful bag
This bag is designed and produced by YAMAHA in Europe. It is mainly used with the 39L tail box. It can be placed in the tail box tightly. Of course, it can also be used alone. The bag is carefully designed and designed, and the interior is shockproof. Although the price is small, it is recommended to buy. -------------------------------------------------- -------- This bag was designed and produced by Yamaha in Europe. The main purpose is to use the 39L tail box. It can be placed in the tail box strictly. Of course, it can also be used alone. Although the price is expensive, it is recommended to buy. Powered by Google Translator View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XVZ1300TFS Venture MM Limited Edition, YAMAHA XVZ1300TFS Royal Star Venture S, YAMAHA XVZ1300TFS Royal Star Midnight Venture, YAMAHA XVZ1300TFM Royal Star Midnight Venture, YAMAHA XVZ1300TF Venture Star, YAMAHA XVZ1300TF Royal Star Venture, YAMAHA XVZ1300CTS Royal Star Tour Deluxe S, YAMAHA XVZ1300CTM Royal Star Tour Deluxe, YAMAHA XVZ1300CT Royal Star Tour Deluxe, YAMAHA XVS950XR-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU BOLT-R(A) SPEC ABS, YAMAHA XVS950CU BOLT-R SPEC, YAMAHA XVS950CU BOLT-C(A) SPEC ABS
Great durability.
I have no complaints at all about the efficacy.
I wondered what I had been using RedPad for all this time.
It has a terrific high longevity, as much as I can say.
I personally choose this one for my SR.
Almost every day because it was also a commuter issue.
I used it for more than 20 km.
After about 2 years of use, I installed it myself and also
I was worried because it didn't decrease too much, so I went to the Shop.
I had it replaced, but there was 4-5mm left.
Moreover, the Baxter was changed and the Brake Arm remained the same.
The Rear brake was almost 100% used as a decoration.
This is despite the fact that it was a Front brake request.
I'd rather just replace it with RedPad for a little bit.
It is better to use this one even if it is a little expensive.
It is by far the most cost-effective.
Crying is none for me.
View detail
Easy and warm.
Installation is easy, and the switch is only ON and OFF, but it is Simple and nice.
I think it would be better if the strings were changed to a non-slip material as they are hard to tighten with the slippery material."
View detail
Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT07, YAMAHA MT07
Yamaha dust seals
Part 2 of the seal change for the forks. I decided this time to go for genuine Yamaha OEM ones. Definitely needed changing along with th main fork seals Very easy to find the correct one using the tools Webike provide with links to manufacturer schematics etc. The cost of the parts was really very good and the shipping, EMS was really good as I also had other parts in the same order. Arrived at my door in less than a week from the day of ordering. Japan to UK, how good is that. The seals themselves are just seals but it's only until you install them and give them some time that you realise the genuine ones will ALWAYS outlast the cheaper alternatives. Never again will I buy cheap no brand parts. It's just not worth it in the end. One very happy bike and now, one very happy customer. Thanks Webike, keep up the great work and service View detail
Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT07, YAMAHA MT07
New gasket for servicing Yamaha MT09
I needed a few parts to get the servicing underway for my MT09. Not had a lot of love from me for a while. The gasket was easy to find the correct part using Yamaha schematics. The cost was really good from Webike as always. I purchased other items for the servicing and this spread out the shipping costs and made them better than I thought. Everything was very well packed and arrived via EMS within a week of ordering. The gasket is perfect, no sharp edges and fitted easily. Very happy customer, keep up the great work Webike View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA YZF-R3, YAMAHA MT-07, YAMAHA YZF-R25, YAMAHA MT-03
soft backrest
I bought this YAMAHA rear glove box backrest from webike. It can be installed on the top of my 39L trunk to make the people in the back seat more comfortable. Its area is larger than other cushions and the softness is good. The installed Sometimes you need to drill holes in the tail box to install it. I bought this YAMAHA rear box back to the back of the Webike. It can be installed on the tail box of my 39L to make the people in the back seat more comfortable. Its area is better than other cushions. Time needs to be poured on the tail box to install. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
You should definitely buy it!
When I bought a motorcycle, I immediately ordered this product to protect my License Plate. (^ ^) View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R25, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA YZF-R25, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03
For YAMAHA 39L rear storage box
I bought a YAMAHA 39L rear storage box from webike, and when it arrived, I found that it was not equipped with a lock cylinder. As a result, the instruction manual said that the lock cylinder needs to be purchased separately with a type A or B lock cylinder, and the type A lock cylinder can match the original motorcycle key. Type B is a separate key, my motorcycle is keyless start, so I bought this type B, it matches perfectly. -------------------------------------------------- -------- I bought the YAMAHA 39L rear box at Webike. After arriving, I found that it was not paired with the lock core. As a result, the instructions said that the lock core needs to buy a type A or B lock core separately. Type B is a separate key. My motorcycle was started at keyless. I bought this type B, which perfectly matched. Powered by Google Translator View detail
![Brake Pads ROAD [SA]](https://img.webike-cdn.net/catalogue/images/114748/Road-SA_TS.jpg)
Fits: YAMAHA TZR250, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA TRACER9 GT, YAMAHA TMAX 530, YAMAHA TMAX560, YAMAHA TMAX 500, YAMAHA TDM900, YAMAHA TDM900 A, YAMAHA ROAD STAR, YAMAHA ROAD STAR MIDNIGHT, YAMAHA MT-10, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA MT-09 SP, YAMAHA FZ1-S, YAMAHA FZ1-N, YAMAHA FZ-6
Excellent pads
I have owned a fair few bikes in my time and still do. Because of this fact I have also trued a lot of different branded brake pads. For the last few years I have been using Brembo. On all my bikes and I also recommend to others. You just know what you are getting with Brembo. This set are for my Yamaha Yzf R1 2017. Really easy to find which pads you need for your bike. Just go to Brembo and input your bike details. Great price and a little better than I can get from here in the UK. As I always order multiple items per order the shipping was really good value. I used FedEx Express and the order was delivered to my door within a week.all items in the order were packaged really well and any spaces in the outer box wee filled out with extra padding. The pads came in their own packet which was sealed. The pads are just awesome. These will make you stop far better than some other brands in the same price range. Just buy them and don't worry, you will stop. Thank for the great service Webike. Fantastic. View detail
Fits: KAWASAKI VN800, KAWASAKI VN800 Classic, PIAGGIO Liberty 125, YAMAHA TMAX, APRILIA Pegaso 650 Strada, APRILIA Pegaso 650 Strada TRAIL, APRILIA Pegaso 650 Strada TRAIL Factory, DERBI Murasen 659, ITALJET Torpedo 125, KAWASAKI Epsilon 150, KAWASAKI Eliminator 125, KAWASAKI Balkan, KAWASAKI Vulcan 400 Classic, KAWASAKI Vulcan 400 Drifter, KAWASAKI Vulcan 800, KAWASAKI Vulcan 800 Classic, KAWASAKI Vulcan 800 Drifter, KAWASAKI Vulcan II, PGO G-MAX125, PGO G-MAX200
watchman
I have chosen NGK since I was a Small monk.
No other options.
View detail
Fits: SUZUKI GSX-R750, HONDA CBR600RA, HONDA CBR300R, HONDA CBR250RR, HONDA CBR250R, HONDA CBR1100XX, HONDA CBR1000RR-R, HONDA RVT1000R, HONDA NC750XD, HONDA NC750X, HONDA Monkey125, HONDA GROM, HONDA FORZASi, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, YAMAHA FZ6R, HONDA CB500F, HONDA CB500FA
Heater performance is Large satisfactory
Only the palm side of the hand gets warm, and the back side is exposed to the wind, so the fingertips and other parts of the hand remain cold, but the warming effect is large enough to warm the palm side alone, and the degree to which the hand becomes numb and immobile after a long ride has been considerably reduced. The power is supplied from the car body, so there is no need to worry about the power supply or hassle when using it.
However, the performance as a grip when the heater is not used is not so good:the rubber itself is thin and has low cushioning, and the surface has little mold, so it requires a little bit of grip when operating the throttle. It is not a problem when riding around town, but it is a little hard when long touring.
I thought that the switch part (the part you press when turning on the power) was separate from the Indicator part, but in fact it is one piece, so the switch part is Large, which could cause accidental power (switching) operations when operating the Blinker.
View detail
Fits: YAMAHA TMAX500, KAWASAKI ZX-6R, HONDA VTR1000SP, HONDA VTR1000SP, HONDA CBR600F, HONDA CB1300SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA VTR1000FVTR1000F FIRESTORM, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA400R, KAWASAKI NINJA650R, KAWASAKI ZZR1100/ZX-11, SUZUKI RGV250 (Gamma), YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ6-S2FAZER, YAMAHA FZ1FAZER, YAMAHA FZS600FAZER, YAMAHA TMAX500
useful car cover
YAMAHA’s TMAX is relatively large. In addition, I installed a tail box. Many car covers on the market cannot be used. This YAMAHA car cover purchased from webike is specially made for medium and large vehicles. It is long enough and can completely cover it. The vehicle, plus the design of the drawstring at the opening, can be well fixed on the vehicle without being blown by the wind, and the fabric has an excellent waterproof effect. -------------------------------------------------- -------- Yamaha's Tmax is relatively large, coupled with the tail box, many hoods on the market cannot be used. The vehicle, the bundle rope design at the outside opening can be fixed well in the car that it will not be blown by the wind, and the waterproof effect of the fabric is outstanding. Powered by Google Translator View detail
Buy the Malossi guy.
I made sure I got it right before I bought it.
The number of entries is the Quantity:2pc. Set" Is this after having the supplier confirm it?
When I opened the box, I found one, and only one side of the box.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500
RK RK TAKASAGO CHAIN GATES [Gates
Replace with the same product currently in use.
It is the same product and has not yet been replaced.
Since it is as comfortable to use as the OEM Product to date, we purchased the same one.
View detail